lkml.org 
[lkml]   [2018]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression caused by commit 882164a4a928
On Wed, 9 May 2018 13:55:43 +0100
Matt Redfearn <matt.redfearn@mips.com> wrote:

> Hi Larry
>
> On 07/05/18 16:44, Larry Finger wrote:
> > Matt,
> >
> > Although commit 882164a4a928 ("ssb: Prevent build of PCI host features
> > in module") appeared to be harmless, it leads to complete failure of
> > drivers b43. and b43legacy, and likely affects b44 as well. The problem
> > is that CONFIG_SSB_PCIHOST is undefined, which prevents the compilation
> > of the code that controls the PCI cores of the device. See
> > https://bugzilla.redhat.com/show_bug.cgi?id=1572349 for details.
>
> Sorry for the breakage :-/
>
> >
> > As the underlying errors ("pcibios_enable_device" undefined, and
> > "register_pci_controller" undefined) do not appear on the architectures
> > that I have tested (x86_64, x86, and ppc), I suspect something in the
> > arch-specific code for your setup (MIPS?). As I have no idea on how to
> > fix that problem, would the following patch work for you?
> >
> > diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
> > index 9371651d8017..3743533c8057 100644
> > --- a/drivers/ssb/Kconfig
> > +++ b/drivers/ssb/Kconfig
> > @@ -117,7 +117,7 @@ config SSB_SERIAL
> >
> >  config SSB_DRIVER_PCICORE_POSSIBLE
> >         bool
> > -       depends on SSB_PCIHOST && SSB = y
> > +       depends on SSB_PCIHOST && (SSB = y || !MIPS)
> >         default y
> >
> >  config SSB_DRIVER_PCICORE
>
> I believe that the problem stems from these drivers being used for some
> wireless AP functionality built into some MIPS based SoCs. The Kconfig
> rules sort out building this additional functionality when configured
> for MIPS (in a round about sort of way), but it allowed it even when SSB
> is a module, leading to build failures. My patch was intended to prevent
> that.
>
> There was a similar issue in the same Kconfig file, introduced by
> c5611df96804 and fixed by a9e6d44ddecc. It was fixed the same way as you
> suggest. I've tested the above patch and it does work for MIPS
> (preventing the PCICORE being built into the module).
>
> Tested-by: Matt Redfearn <matt.redfearn@mips.com>


Could you please try this?

config SSB_DRIVER_PCICORE_POSSIBLE
depends on SSB_PCIHOST

config SSB_PCICORE_HOSTMODE
depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && (SSB = y) && PCI_DRIVERS_LEGACY


The affected API pcibios_enable_device() and register_pci_controller()
is only used in HOSTMODE. So I think it makes sense to make HOSTMODE
depend on SSB=y and PCI_DRIVERS_LEGACY.

PCICore itself does not use the API, if hostmode is disabled.

--
Michael
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-05-09 18:30    [W:0.093 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site