lkml.org 
[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [J-core] [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree
On Mon, 07 May 2018 20:00:17 +0900,
John Paul Adrian Glaubitz wrote:
>
> On 05/07/2018 03:40 AM, Yoshinori Sato wrote:
> >> @Yoshinori:
> >>
> >> Did the HDL-160U LANDISK device you have use u-boot by default or
> >> did you convert it from lilo?
> >
> > Yes.
> > Replace sh-lilo's second stage with u-boot.
> > With this method it is unnecessary to rewrite Flash for boot.
>
> Great, thank you. I will give it a try on my USL-5P and write down
> the individual steps once I have figured it out.
>
> As for the IDE controller: Can you tell me whether there are any
> particular patches necessary to get the kernel detect the IDE
> controller of the LANDISK devices?

I have not changed it in particular.
It works with AEC-62XX.

> I have been able to boot my own kernel on my USL-5P device, but
> I could never get it to detect the IDE controller. Do I need
> an additional patch for that?
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer - glaubitz@debian.org
> `. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--
Yosinori Sato

\
 
 \ /
  Last update: 2018-05-08 14:05    [W:0.190 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site