lkml.org 
[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] input: gamecon: avoid using __set_bit() for capabilities
On Sat, Mar 31, 2018 at 01:21:42PM +0200, Marcus Folkesson wrote:
> input_set_capability() and input_set_abs_param() will do it for you.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>

Applied, thank you.

> ---
> drivers/input/joystick/gamecon.c | 26 ++++++++++++++------------
> 1 file changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
> index 2ffb2e8bdc3b..e3a9ef3d5f5a 100644
> --- a/drivers/input/joystick/gamecon.c
> +++ b/drivers/input/joystick/gamecon.c
> @@ -862,7 +862,7 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
>
> case GC_N64:
> for (i = 0; i < 10; i++)
> - __set_bit(gc_n64_btn[i], input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, gc_n64_btn[i]);
>
> for (i = 0; i < 2; i++) {
> input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
> @@ -879,26 +879,27 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
> break;
>
> case GC_SNESMOUSE:
> - __set_bit(BTN_LEFT, input_dev->keybit);
> - __set_bit(BTN_RIGHT, input_dev->keybit);
> - __set_bit(REL_X, input_dev->relbit);
> - __set_bit(REL_Y, input_dev->relbit);
> + input_set_capability(input_dev, EV_KEY, BTN_LEFT);
> + input_set_capability(input_dev, EV_KEY, BTN_RIGHT);
> + input_set_capability(input_dev, EV_REL, REL_X);
> + input_set_capability(input_dev, EV_REL, REL_Y);
> break;
>
> case GC_SNES:
> for (i = 4; i < 8; i++)
> - __set_bit(gc_snes_btn[i], input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, gc_snes_btn[i]);
> /* fall through */
> case GC_NES:
> for (i = 0; i < 4; i++)
> - __set_bit(gc_snes_btn[i], input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, gc_snes_btn[i]);
> break;
>
> case GC_MULTI2:
> - __set_bit(BTN_THUMB, input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, BTN_THUMB);
> /* fall through */
> case GC_MULTI:
> - __set_bit(BTN_TRIGGER, input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, BTN_TRIGGER);
> + /* fall through */
> break;
>
> case GC_PSX:
> @@ -906,15 +907,16 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
> input_set_abs_params(input_dev,
> gc_psx_abs[i], 4, 252, 0, 2);
> for (i = 0; i < 12; i++)
> - __set_bit(gc_psx_btn[i], input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, gc_psx_btn[i]);
> + break;
>
> break;
>
> case GC_DDR:
> for (i = 0; i < 4; i++)
> - __set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, gc_psx_ddr_btn[i]);
> for (i = 0; i < 12; i++)
> - __set_bit(gc_psx_btn[i], input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, gc_psx_btn[i]);
>
> break;
> }
> --
> 2.16.2
>

--
Dmitry

\
 
 \ /
  Last update: 2018-05-09 00:33    [W:0.041 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site