lkml.org 
[lkml]   [2018]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 18/27] coresight: catu: Add support for scatter gather tables
On Tue, May 01, 2018 at 10:10:48AM +0100, Suzuki K Poulose wrote:
> This patch adds the support for setting up a SG table for use
> by the CATU. We reuse the tmc_sg_table to represent the table/data
> pages, even though the table format is different.
>
> Similar to ETR SG table, CATU uses a 4KB page size for data buffers
> as well as page tables. All table entries are 64bit wide and have
> the following format:
>
> 63 12 1 0
> x-----------------------------------x
> | Address [63-12] | SBZ | V |
> x-----------------------------------x
>
> Where [V] -> 0 - Pointer is invalid
> 1 - Pointer is Valid
>
> CATU uses only first half of the page for data page pointers.
> i.e, single table page will only have 256 page pointers, addressing
> upto 1MB of data. The second half of a table page contains only two
> pointers at the end of the page (i.e, pointers at index 510 and 511),
> which are used as links to the "Previous" and "Next" page tables
> respectively.
>
> The first table page has an "Invalid" previous pointer and the
> next pointer entry points to the second page table if there is one.
> Similarly the last table page has an "Invalid" next pointer to
> indicate the end of the table chain.
>
> We create a circular buffer (i.e, first_table[prev] => last_table
> and last_table[next] => first_table) by default and provide
> helpers to make the buffer linear from a given offset. When we
> set the buffer to linear, we also mark the "pointers" in the
> outside the given "range" as invalid. We have to do this only
> for the starting and ending tables, as we disconnect the other
> table by invalidating the links. This will allow the ETR buf to
> be restored from a given offset with any size.
>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> drivers/hwtracing/coresight/coresight-catu.c | 409 +++++++++++++++++++++++++++
> 1 file changed, 409 insertions(+)
>
> diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c
> index 2cd69a6..4cc2928 100644
> --- a/drivers/hwtracing/coresight/coresight-catu.c
> +++ b/drivers/hwtracing/coresight/coresight-catu.c
> @@ -16,10 +16,419 @@
>
> #include "coresight-catu.h"
> #include "coresight-priv.h"
> +#include "coresight-tmc.h"
>
> #define csdev_to_catu_drvdata(csdev) \
> dev_get_drvdata(csdev->dev.parent)
>
> +/*
> + * CATU uses a page size of 4KB for page tables as well as data pages.
> + * Each 64bit entry in the table has the following format.
> + *
> + * 63 12 1 0
> + * ------------------------------------
> + * | Address [63-12] | SBZ | V|
> + * ------------------------------------
> + *
> + * Where bit[0] V indicates if the address is valid or not.
> + * Each 4K table pages have upto 256 data page pointers, taking upto 2K
> + * size. There are two Link pointers, pointing to the previous and next
> + * table pages respectively at the end of the 4K page. (i.e, entry 510
> + * and 511).
> + * E.g, a table of two pages could look like :
> + *
> + * Table Page 0 Table Page 1
> + * SLADDR ===> x------------------x x--> x-----------------x
> + * INADDR ->| Page 0 | V | | | Page 256 | V | <- INADDR+1M
> + * |------------------| | |-----------------|
> + * INADDR+4K ->| Page 1 | V | | | |
> + * |------------------| | |-----------------|
> + * | Page 2 | V | | | |
> + * |------------------| | |-----------------|
> + * | ... | V | | | ... |
> + * |------------------| | |-----------------|
> + * INADDR+1020K| Page 255 | V | | | Page 511 | V |
> + * SLADDR+2K==>|------------------| | |-----------------|
> + * | UNUSED | | | | |
> + * |------------------| | | |
> + * | UNUSED | | | | |
> + * |------------------| | | |
> + * | ... | | | | |
> + * |------------------| | |-----------------|
> + * | IGNORED | 0 | | | Table Page 0| 1 |
> + * |------------------| | |-----------------|
> + * | Table Page 1| 1 |--x | IGNORED | 0 |
> + * x------------------x x-----------------x
> + * SLADDR+4K==>
> + *
> + * The base input address (used by the ETR, programmed in INADDR_{LO,HI})
> + * must be aligned to 1MB (the size addressable by a single page table).
> + * The CATU maps INADDR{LO:HI} to the first page in the table pointed
> + * to by SLADDR{LO:HI} and so on.
> + *
> + */
> +typedef u64 cate_t;
> +
> +#define CATU_PAGE_SHIFT 12
> +#define CATU_PAGE_SIZE (1UL << CATU_PAGE_SHIFT)
> +#define CATU_PAGES_PER_SYSPAGE (PAGE_SIZE / CATU_PAGE_SIZE)
> +
> +/* Page pointers are only allocated in the first 2K half */
> +#define CATU_PTRS_PER_PAGE ((CATU_PAGE_SIZE >> 1) / sizeof(cate_t))
> +#define CATU_PTRS_PER_SYSPAGE (CATU_PAGES_PER_SYSPAGE * CATU_PTRS_PER_PAGE)
> +#define CATU_LINK_PREV ((CATU_PAGE_SIZE / sizeof(cate_t)) - 2)
> +#define CATU_LINK_NEXT ((CATU_PAGE_SIZE / sizeof(cate_t)) - 1)
> +
> +#define CATU_ADDR_SHIFT 12
> +#define CATU_ADDR_MASK ~(((cate_t)1 << CATU_ADDR_SHIFT) - 1)
> +#define CATU_ENTRY_VALID ((cate_t)0x1)
> +#define CATU_ENTRY_INVALID ((cate_t)0)
> +#define CATU_VALID_ENTRY(addr) \
> + (((cate_t)(addr) & CATU_ADDR_MASK) | CATU_ENTRY_VALID)
> +#define CATU_ENTRY_ADDR(entry) ((cate_t)(entry) & ~((cate_t)CATU_ENTRY_VALID))
> +
> +/*
> + * Index into the CATU entry pointing to the page within
> + * the table. Each table entry can point to a 4KB page, with
> + * a total of 255 entries in the table adding upto 1MB per table.
> + *
> + * So, bits 19:12 gives you the index of the entry in
> + * the table.
> + */
> +static inline unsigned long catu_offset_to_entry_idx(unsigned long offset)
> +{
> + return (offset & (SZ_1M - 1)) >> 12;
> +}
> +
> +static inline void catu_update_state(cate_t *catep, int valid)
> +{
> + *catep &= ~CATU_ENTRY_VALID;
> + *catep |= valid ? CATU_ENTRY_VALID : CATU_ENTRY_INVALID;
> +}
> +
> +/*
> + * Update the valid bit for a given range of indices [start, end)
> + * in the given table @table.
> + */
> +static inline void catu_update_state_range(cate_t *table, int start,
> + int end, int valid)

Indentation

> +{
> + int i;
> + cate_t *pentry = &table[start];
> + cate_t state = valid ? CATU_ENTRY_VALID : CATU_ENTRY_INVALID;
> +
> + /* Limit the "end" to maximum range */
> + if (end > CATU_PTRS_PER_PAGE)
> + end = CATU_PTRS_PER_PAGE;
> +
> + for (i = start; i < end; i++, pentry++) {
> + *pentry &= ~(cate_t)CATU_ENTRY_VALID;
> + *pentry |= state;
> + }
> +}
> +
> +/*
> + * Update valid bit for all entries in the range [start, end)
> + */
> +static inline void
> +catu_table_update_offset_range(cate_t *table,
> + unsigned long start,
> + unsigned long end,
> + int valid)
> +{
> + catu_update_state_range(table,
> + catu_offset_to_entry_idx(start),
> + catu_offset_to_entry_idx(end),
> + valid);
> +}
> +
> +static inline void catu_table_update_prev(cate_t *table, int valid)
> +{
> + catu_update_state(&table[CATU_LINK_PREV], valid);
> +}
> +
> +static inline void catu_table_update_next(cate_t *table, int valid)
> +{
> + catu_update_state(&table[CATU_LINK_NEXT], valid);
> +}
> +
> +/*
> + * catu_get_table : Retrieve the table pointers for the given @offset
> + * within the buffer. The buffer is wrapped around to a valid offset.
> + *
> + * Returns : The CPU virtual address for the beginning of the table
> + * containing the data page pointer for @offset. If @daddrp is not NULL,
> + * @daddrp points the DMA address of the beginning of the table.
> + */
> +static inline cate_t *catu_get_table(struct tmc_sg_table *catu_table,
> + unsigned long offset,
> + dma_addr_t *daddrp)
> +{
> + unsigned long buf_size = tmc_sg_table_buf_size(catu_table);
> + unsigned int table_nr, pg_idx, pg_offset;
> + struct tmc_pages *table_pages = &catu_table->table_pages;
> + void *ptr;
> +
> + /* Make sure offset is within the range */
> + offset %= buf_size;
> +
> + /*
> + * Each table can address 1MB and a single kernel page can
> + * contain "CATU_PAGES_PER_SYSPAGE" CATU tables.
> + */
> + table_nr = offset >> 20;
> + /* Find the table page where the table_nr lies in */
> + pg_idx = table_nr / CATU_PAGES_PER_SYSPAGE;
> + pg_offset = (table_nr % CATU_PAGES_PER_SYSPAGE) * CATU_PAGE_SIZE;
> + if (daddrp)
> + *daddrp = table_pages->daddrs[pg_idx] + pg_offset;
> + ptr = page_address(table_pages->pages[pg_idx]);
> + return (cate_t *)((unsigned long)ptr + pg_offset);
> +}
> +
> +#ifdef CATU_DEBUG
> +static void catu_dump_table(struct tmc_sg_table *catu_table)
> +{
> + int i;
> + cate_t *table;
> + unsigned long table_end, buf_size, offset = 0;
> +
> + buf_size = tmc_sg_table_buf_size(catu_table);
> + dev_dbg(catu_table->dev,
> + "Dump table %p, tdaddr: %llx\n",
> + catu_table, catu_table->table_daddr);
> +
> + while (offset < buf_size) {
> + table_end = offset + SZ_1M < buf_size ?
> + offset + SZ_1M : buf_size;
> + table = catu_get_table(catu_table, offset, NULL);
> + for (i = 0; offset < table_end; i++, offset += CATU_PAGE_SIZE)
> + dev_dbg(catu_table->dev, "%d: %llx\n", i, table[i]);
> + dev_dbg(catu_table->dev, "Prev : %llx, Next: %llx\n",
> + table[CATU_LINK_PREV], table[CATU_LINK_NEXT]);
> + dev_dbg(catu_table->dev, "== End of sub-table ===");
> + }
> + dev_dbg(catu_table->dev, "== End of Table ===");
> +}
> +
> +#else
> +static inline void catu_dump_table(struct tmc_sg_table *catu_table)
> +{
> +}
> +#endif

I think this approach is better than peppering the code with #ifdefs as it was
done for ETR. Please fix that to replicate what you've done here.

> +
> +/*
> + * catu_update_table: Update the start and end tables for the
> + * region [base, base + size) to, validate/invalidate the pointers
> + * outside the area.
> + *
> + * CATU expects the table base address (SLADDR) aligned to 4K.
> + * If the @base is not aligned to 1MB, we should mark all the
> + * pointers in the start table before @base "INVALID".
> + * Similarly all pointers in the last table beyond (@base + @size)
> + * should be marked INVALID.
> + * The table page containinig the "base" is marked first (by
> + * marking the previous link INVALID) and the table page
> + * containing "base + size" is marked last (by marking next
> + * link INVALID).
> + * By default we have to update the state of pointers
> + * for offsets in the range :
> + * Start table: [0, ALIGN_DOWN(base))
> + * End table : [ALIGN(end + 1), SZ_1M)
> + * But, if we the buffer wraps around and ends in the same table
> + * as the "base", (i,e this should be :
> + * [ALIGN(end + 1), base)
> + *
> + * Returns the dma_address for the start_table, which can be set as
> + * SLADDR.
> + */
> +static dma_addr_t catu_update_table(struct tmc_sg_table *catu_table,
> + u64 base, u64 size, int valid)
> +{
> + cate_t *start_table, *end_table;
> + dma_addr_t taddr;
> + u64 buf_size, end = base + size - 1;
> + unsigned int start_off = 0; /* Offset to begin in start_table */
> + unsigned int end_off = SZ_1M; /* Offset to end in the end_table */
> +
> + buf_size = tmc_sg_table_buf_size(catu_table);
> + if (end > buf_size)
> + end -= buf_size;
> +
> + /* Get both the virtual and the DMA address of the first table */
> + start_table = catu_get_table(catu_table, base, &taddr);
> + end_table = catu_get_table(catu_table, end, NULL);
> +
> + /* Update the "PREV" link for the starting table */
> + catu_table_update_prev(start_table, valid);
> +
> + /* Update the "NEXT" link only if this is not the start_table */
> + if (end_table != start_table) {
> + catu_table_update_next(end_table, valid);
> + } else if (end < base) {
> + /*
> + * If the buffer has wrapped around and we have got the
> + * "end" before "base" in the same table, we need to be
> + * extra careful. We only need to invalidate the ptrs
> + * in between the "end" and "base".
> + */
> + start_off = ALIGN(end, CATU_PAGE_SIZE);
> + end_off = 0;
> + }
> +
> + /* Update the pointers in the starting table before the "base" */
> + catu_table_update_offset_range(start_table,
> + start_off,
> + base,
> + valid);
> + if (end_off)
> + catu_table_update_offset_range(end_table,
> + end,
> + end_off,
> + valid);
> +
> + catu_dump_table(catu_table);
> + return taddr;
> +}
> +
> +/*
> + * catu_set_table : Set the buffer to act as linear buffer
> + * from @base of @size.
> + *
> + * Returns : The DMA address for the table containing base.
> + * This can then be programmed into SLADDR.
> + */
> +static dma_addr_t
> +catu_set_table(struct tmc_sg_table *catu_table, u64 base, u64 size)
> +{
> + /* Make all the entries outside this range invalid */
> + dma_addr_t sladdr = catu_update_table(catu_table, base, size, 0);
> + /* Sync the changes to memory for CATU */
> + tmc_sg_table_sync_table(catu_table);
> + return sladdr;
> +}
> +
> +static void __maybe_unused
> +catu_reset_table(struct tmc_sg_table *catu_table, u64 base, u64 size)
> +{
> + /* Make all the entries outside this range valid */
> + (void)catu_update_table(catu_table, base, size, 1);
> +}
> +
> +/*
> + * catu_populate_table : Populate the given CATU table.
> + * The table is always populated as a circular table.
> + * i.e, the "prev" link of the "first" table points to the "last"
> + * table and the "next" link of the "last" table points to the
> + * "first" table. The buffer should be made linear by calling
> + * catu_set_table().
> + */
> +static void
> +catu_populate_table(struct tmc_sg_table *catu_table)
> +{
> + int i, dpidx, s_dpidx;
> + unsigned long offset, buf_size, last_offset;
> + dma_addr_t data_daddr;
> + dma_addr_t prev_taddr, next_taddr, cur_taddr;
> + cate_t *table_ptr, *next_table;
> +
> + buf_size = tmc_sg_table_buf_size(catu_table);
> + dpidx = s_dpidx = 0;
> + offset = 0;
> +
> + table_ptr = catu_get_table(catu_table, 0, &cur_taddr);
> + /*
> + * Use the address of the "last" table as the "prev" link
> + * for the first table.
> + */
> + (void)catu_get_table(catu_table, buf_size - 1, &prev_taddr);
> +
> + while (offset < buf_size) {
> + /*
> + * The @offset is always 1M aligned here and we have an
> + * empty table @table_ptr to fill. Each table can address
> + * upto 1MB data buffer. The last table may have fewer
> + * entries if the buffer size is not aligned.
> + */
> + last_offset = (offset + SZ_1M) < buf_size ?
> + (offset + SZ_1M) : buf_size;
> + for (i = 0; offset < last_offset; i++) {
> +
> + data_daddr = catu_table->data_pages.daddrs[dpidx] +
> + s_dpidx * CATU_PAGE_SIZE;
> +#ifdef CATU_DEBUG
> + dev_dbg(catu_table->dev,
> + "[table %5d:%03d] 0x%llx\n",
> + (offset >> 20), i, data_daddr);
> +#endif

I'm not a fan of adding #ifdefs in the code like this. I think it is better to
have a wrapper (that resolves to nothing if CATU_DEBUG is not defined) and
handle the output in there.

> + table_ptr[i] = CATU_VALID_ENTRY(data_daddr);
> + offset += CATU_PAGE_SIZE;
> + /* Move the pointers for data pages */
> + s_dpidx = (s_dpidx + 1) % CATU_PAGES_PER_SYSPAGE;
> + if (s_dpidx == 0)
> + dpidx++;
> + }
> +
> + /*
> + * If we have finished all the valid entries, fill the rest of
> + * the table (i.e, last table page) with invalid entries,
> + * to fail the lookups.
> + */
> + if (offset == buf_size)
> + catu_table_update_offset_range(table_ptr,
> + offset - 1, SZ_1M, 0);
> +
> + /*
> + * Find the next table by looking up the table that contains
> + * @offset. For the last table, this will return the very
> + * first table (as the offset == buf_size, and thus returns
> + * the table for offset = 0.)
> + */
> + next_table = catu_get_table(catu_table, offset, &next_taddr);
> + table_ptr[CATU_LINK_PREV] = CATU_VALID_ENTRY(prev_taddr);
> + table_ptr[CATU_LINK_NEXT] = CATU_VALID_ENTRY(next_taddr);
> +
> +#ifdef CATU_DEBUG
> + dev_dbg(catu_table->dev,
> + "[table%5d]: Cur: 0x%llx Prev: 0x%llx, Next: 0x%llx\n",
> + (offset >> 20) - 1, cur_taddr, prev_taddr, next_taddr);
> +#endif
> +
> + /* Update the prev/next addresses */
> + prev_taddr = cur_taddr;
> + cur_taddr = next_taddr;
> + table_ptr = next_table;
> + }
> +}
> +
> +static struct tmc_sg_table __maybe_unused *
> +catu_init_sg_table(struct device *catu_dev, int node,
> + ssize_t size, void **pages)
> +{
> + int nr_tpages;
> + struct tmc_sg_table *catu_table;
> +
> + /*
> + * Each table can address upto 1MB and we can have
> + * CATU_PAGES_PER_SYSPAGE tables in a system page.
> + */
> + nr_tpages = DIV_ROUND_UP(size, SZ_1M) / CATU_PAGES_PER_SYSPAGE;
> + catu_table = tmc_alloc_sg_table(catu_dev, node, nr_tpages,
> + size >> PAGE_SHIFT, pages);
> + if (IS_ERR(catu_table))
> + return catu_table;
> +
> + catu_populate_table(catu_table);
> + /* Make the buf linear from offset 0 */
> + (void)catu_set_table(catu_table, 0, size);
> +
> + dev_dbg(catu_dev,
> + "Setup table %p, size %ldKB, %d table pages\n",
> + catu_table, (unsigned long)size >> 10, nr_tpages);

I think this should also be wrapped in a special output debug function.

> + catu_dump_table(catu_table);
> + return catu_table;
> +}
> +
> coresight_simple_reg32(struct catu_drvdata, control, CATU_CONTROL);
> coresight_simple_reg32(struct catu_drvdata, status, CATU_STATUS);
> coresight_simple_reg32(struct catu_drvdata, mode, CATU_MODE);
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-05-07 22:25    [W:0.323 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site