lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 11/13] KVM: x86: Implement Intel Processor Trace MSRs read/write
On Thu, May 03, 2018 at 08:08:41PM +0800, Luwei Kang wrote:
> From: Chao Peng <chao.p.peng@linux.intel.com>
>
> Implement Intel Processor Trace MSRs read/write.

There needs to be a commit message here.

> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
> Signed-off-by: Luwei Kang <luwei.kang@intel.com>
> ---
> arch/x86/include/asm/intel_pt.h | 8 ++
> arch/x86/kvm/vmx.c | 163 ++++++++++++++++++++++++++++++++++++++++
> arch/x86/kvm/x86.c | 33 +++++++-
> 3 files changed, 203 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/intel_pt.h b/arch/x86/include/asm/intel_pt.h
> index 43ad260..dc0f3f0 100644
> --- a/arch/x86/include/asm/intel_pt.h
> +++ b/arch/x86/include/asm/intel_pt.h
> @@ -5,6 +5,14 @@
> #define PT_CPUID_LEAVES 2
> #define PT_CPUID_REGS_NUM 4 /* number of regsters (eax, ebx, ecx, edx) */
>
> +#define MSR_IA32_RTIT_STATUS_MASK (~(RTIT_STATUS_FILTEREN | \
> + RTIT_STATUS_CONTEXTEN | RTIT_STATUS_TRIGGEREN | \
> + RTIT_STATUS_ERROR | RTIT_STATUS_STOPPED | \
> + RTIT_STATUS_BYTECNT))
> +
> +#define MSR_IA32_RTIT_OUTPUT_BASE_MASK \
> + (~((1UL << cpuid_query_maxphyaddr(vcpu)) - 1) | 0x7f)

How does this macro make sense in the intel_pt.h? It also relies on vcpu
being in the scope.

> enum pt_mode {
> PT_MODE_SYSTEM = 0,
> PT_MODE_HOST,
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 3ed02a8..2a29ab9 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -2769,6 +2769,77 @@ static void vmx_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
> vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, interruptibility);
> }
>
> +static int vmx_rtit_ctl_check(struct kvm_vcpu *vcpu, u64 data)
> +{
> + struct vcpu_vmx *vmx = to_vmx(vcpu);
> + unsigned long value;
> +
> + /*
> + * Any MSR write that attempts to change bits marked reserved will
> + * case a #GP fault.
> + */
> + if (data & vmx->pt_desc.ctl_bitmask)
> + return 1;
> +
> + /*
> + * Any attempt to modify IA32_RTIT_CTL while TraceEn is set will
> + * result in a #GP unless the same write also clears TraceEn.
> + */
> + if ((vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) &&
> + ((vmx->pt_desc.guest.ctl ^ data) & ~RTIT_CTL_TRACEEN))
> + return 1;
> +
> + /*
> + * WRMSR to IA32_RTIT_CTL that sets TraceEn but clears this bit
> + * and FabricEn would cause #GP, if
> + * CPUID.(EAX=14H, ECX=0):ECX.SNGLRGNOUT[bit 2] = 0
> + */
> + if ((data & RTIT_CTL_TRACEEN) && !(data & RTIT_CTL_TOPA) &&
> + !(data & RTIT_CTL_FABRIC_EN) &&
> + !__pt_cap_get(vmx->pt_desc.caps, PT_CAP_single_range_output))

You seem to be doing a lot of __pt_cap_get()s on each wrmsr. Did you consider
decoding the capabilities once and storing the decoded values instead, so
that in functions like these you can access them by

if (vmx->pt_desc.caps[PT_CAP_single_range_output]) ...

?

Regards,
--
Alex

\
 
 \ /
  Last update: 2018-05-04 12:12    [W:0.152 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site