lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/6] mfd: da9063: Disallow RTC on DA9063L
From
Date
On 05/29/2018 09:55 AM, Lee Jones wrote:
> On Thu, 24 May 2018, Steve Twiss wrote:
>
>> Thanks Marek,
>>
>> On 23 May 2018 12:42 Marek Vasut wrote,
>>
>>> To: linux-kernel@vger.kernel.org
>>> Cc: Marek Vasut <marek.vasut+renesas@gmail.com>; Geert Uytterhoeven <geert+renesas@glider.be>; Lee Jones <lee.jones@linaro.org>; Mark Brown <broonie@kernel.org>; Steve Twiss <stwiss.opensource@diasemi.com>; Wolfram Sang <wsa+renesas@sang-engineering.com>; linux-renesas-soc@vger.kernel.org
>>> Subject: [PATCH 4/6] mfd: da9063: Disallow RTC on DA9063L
>>>
>>> The DA9063L does not contain RTC block, unlike the full DA9063.
>>> Do not allow binding RTC driver on this variant of the chip.
>>>
>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>>> Cc: Lee Jones <lee.jones@linaro.org>
>>> Cc: Mark Brown <broonie@kernel.org>
>>> Cc: Steve Twiss <stwiss.opensource@diasemi.com>
>>> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
>>> Cc: linux-renesas-soc@vger.kernel.org
>>> ---
>>> drivers/mfd/da9063-core.c | 18 +++++++++++-------
>>> 1 file changed, 11 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index 7360b76b4f72..263c83006413 100644
>>> --- a/drivers/mfd/da9063-core.c
>>> +++ b/drivers/mfd/da9063-core.c
>>> @@ -101,14 +101,14 @@ static const struct mfd_cell da9063_devs[] = {
>>> .of_compatible = "dlg,da9063-onkey",
>>> },
>>> {
>>> + .name = DA9063_DRVNAME_VIBRATION,
>>> + },
>>> + { /* Only present on DA9063 , not on DA9063L */
>>> .name = DA9063_DRVNAME_RTC,
>>> .num_resources = ARRAY_SIZE(da9063_rtc_resources),
>>> .resources = da9063_rtc_resources,
>>> .of_compatible = "dlg,da9063-rtc",
>>> },
>>> - {
>>> - .name = DA9063_DRVNAME_VIBRATION,
>>> - },
>>> };
>>>
>>> static int da9063_clear_fault_log(struct da9063 *da9063) @@ -163,7 +163,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) {
>>> struct da9063_pdata *pdata = da9063->dev->platform_data;
>>> int model, variant_id, variant_code;
>>> - int ret;
>>> + int da9063_devs_len, ret;
>>>
>>> ret = da9063_clear_fault_log(da9063);
>>> if (ret < 0)
>>> @@ -225,9 +225,13 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
>>>
>>> da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq);
>>>
>>> - ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
>>> - ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
>>> - NULL);
>>> + da9063_devs_len = ARRAY_SIZE(da9063_devs);
>>> + /* RTC, the last device in the list, is only present on DA9063 */
>>> + if (da9063->type == PMIC_TYPE_DA9063L)
>>> + da9063_devs_len -= 1;
>>> +
>>> + ret = mfd_add_devices(da9063->dev, -1, da9063_devs, da9063_devs_len,
>>> + NULL, da9063->irq_base, NULL);
>>> if (ret)
>>> dev_err(da9063->dev, "Cannot add MFD cells\n");
>>>
>>
>> MFD cells definitely has less impact than regmap_range and regmap_irq.
>> I agree, there's no point in having a completely new
>> static const struct mfd_cell da9063l_devs[] = { ... } for DA9063L
>
> This solution is fragile.
>
> I agree that a new MFD cell is not required in its entirety. It
> would however, be better to split out the RTC entry into a new one and
> only register it when (da9063->type == PMIC_TYPE_DA9063). This is a
> better solution than messing around with passed struct sizes.

This indeed is better.

btw this da9063_device_init() function is missing a failpath to undo the
setup done by da9063_irq_init(), so I'll be sending a patch for that too
shortly.

--
Best regards,
Marek Vasut

\
 
 \ /
  Last update: 2018-05-30 13:03    [W:0.072 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site