lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH] serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version
Hi Daniel,

On Mon, Apr 30, 2018 at 10:09 AM, Daniel Wagner <wagi@monom.org> wrote:
> From: Daniel Wagner <daniel.wagner@siemens.com>
>
> Commit 40f70c03e33a ("serial: sh-sci: add locking to console write
> function to avoid SMP lockup") copied the strategy to avoid locking
> problems in conjuncture with the console from the UART8250
> driver. Instead using directly spin_{try}lock_irqsave(),
> local_irq_save() followed by spin_{try}lock() was used. While this is
> correct on mainline, for -rt it is a problem. spin_{try}lock() will
> check if it is running in a valid context. Since the local_irq_save()
> has already been executed, the context has changed and
> spin_{try}lock() will complain. The reason why spin_{try}lock()
> complains is that on -rt the spin locks are turned into mutexes and
> therefore can sleep. Sleeping with interrupts disabled is not valid.

> Cc: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
> Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>

Thanks for your patch!

> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -2516,13 +2516,12 @@ static void serial_console_write(struct console *co, const char *s,
> unsigned long flags;
> int locked = 1;
>
> - local_irq_save(flags);

Hence the below now runs with local interrupts enabled.

For checking port->sysrq or oops_in_progress that probably isn't an issue.
If oops_in_progress is set, you have other problems, and the race condition
between checking the flag and calling spin_lock{,_irqsave}() existed before,
and is hard to avoid.

For actual console printing, I think you want to keep interrupts disabled.

> if (port->sysrq)
> locked = 0;
> else if (oops_in_progress)
> - locked = spin_trylock(&port->lock);
> + locked = spin_trylock_irqsave(&port->lock, flags);
> else
> - spin_lock(&port->lock);
> + spin_lock_irqsave(&port->lock, flags);

Add

if (!locked
local_irq_save(flags)

here?

> /* first save the SCSCR then disable the interrupts */
> ctrl = serial_port_in(port, SCSCR);
> @@ -2539,8 +2538,7 @@ static void serial_console_write(struct console *co, const char *s,
> serial_port_out(port, SCSCR, ctrl);
>
> if (locked)
> - spin_unlock(&port->lock);
> - local_irq_restore(flags);
> + spin_unlock_irqrestore(&port->lock, flags);

else
local_irq_restore(flags);

> }

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2018-05-03 09:44    [W:0.910 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site