Messages in this thread | | | Date | Fri, 4 May 2018 09:19:40 +0800 | From | Yong <> | Subject | Re: [PATCH v9 0/2] Initial Allwinner V3s CSI Support |
| |
Hi Maxime,
On Thu, 3 May 2018 19:14:10 +0200 Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> Hi Yong, > > On Tue, Mar 06, 2018 at 09:51:10AM +0800, Yong Deng wrote: > > This patchset add initial support for Allwinner V3s CSI. > > > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > > interface and CSI1 is used for parallel interface. This is not > > documented in datasheet but by test and guess. > > > > This patchset implement a v4l2 framework driver and add a binding > > documentation for it. > > > > Currently, the driver only support the parallel interface. And has been > > tested with a BT1120 signal which generating from FPGA. The following > > fetures are not support with this patchset: > > - ISP > > - MIPI-CSI2 > > - Master clock for camera sensor > > - Power regulator for the front end IC > > Do you plan on sending another version some time soon? It would be > awesome to have this in 4.18.
I was waiting for Sakari Ailus's feedback. But ... I will send a new version soon. But not all suggestion from Sakari Ailus would be accepted.
> > Thanks! > Maxime > > -- > Maxime Ripard, Bootlin (formerly Free Electrons) > Embedded Linux and Kernel engineering > https://bootlin.com
Thanks, Yong
| |