lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-sunxi] [PATCH 3/3] arm64: allwinner: h6: enable MMC0/2 on Pine H64
On Wed, May 02, 2018 at 12:01:53PM +0100, Andre Przywara wrote:
> >>>> It looks like there are more users of those power rails, so we could
> >>>> keep those supplies connected to these fixed regulators here, even with
> >>>> AXP-805 support in the kernel.
> >>>
> >>> It's not a good choice.
> >>>
> >>>>
> >>>> Or we keep this back until we get proper AXP support in the kernel? I
> >>>> guess it's quite close to the existing PMICs, so it might be more a
> >>>> copy&paste exercise to support the AXP-805?
> >>>
> >>> It's not a reason to keep it back.
> >>
> >> So I compared the manuals of the AXP806 and the AXP805, the register
> >> interface looks identical to me. I only have a (somewhat) Chinese
> >> version of the AXP806 manual, so couldn't really find the difference
> >> between the two. Do you know more about it? Is it just maybe the
> >> packaging and the electrical properties (like max current supported)?
> >>
> >> If the I2C register interface is really the same, we could just add the
> >> DT nodes for the regulator and be done.
> >
> > And that argument is only valid if you 100% trust the fact that both
> > datasheet are complete and accurate.
> >
> > And experience show that you can't.
>
> Well, but I wonder how paranoid we are going to be? And in this case we
> have confirmation from Wink that they are the same.

Paranoid enough so that we don't blindly trust that the reviewer had a
coffee, no interruptions or moment of distraction, or that the
datasheet is correct.

But not so paranoid that having the driver running on a kernel is
enough.

> So I think we can go with just a DT addition, given that we test it
> and confirm that it works for our use case. Should we discover
> something odd or undocumented later, I'd consider this a bug fix,
> which we then (and only then!) could fix by adding the compatible
> string to the driver. Any DT would be fine already, because we list
> both compatible strings in there.

In this particular case, yeah, it seems reasonable.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-05-03 20:06    [W:1.118 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site