lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 0/6] optimize memblock_next_valid_pfn and early_pfn_valid on arm and arm64
From
Date
Ping

Sorry if I am a little bit verbose, but it can speedup the arm64 booting time
indeed.

--
Cheers,
Jia

On 4/11/2018 3:21 PM, Jia He Wrote:
> Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns
> where possible") tried to optimize the loop in memmap_init_zone(). But
> there is still some room for improvement.
>
> Patch 1 introduce new config to make codes more generic
> Patch 2 remain the memblock_next_valid_pfn on arm and arm64
> Patch 3 optimizes the memblock_next_valid_pfn()
> Patch 4~6 optimizes the early_pfn_valid()
>
> As for the performance improvement, after this set, I can see the time
> overhead of memmap_init() is reduced from 41313 us to 24389 us in my
> armv8a server(QDF2400 with 96G memory).
>
> Without this patchset:
> [ 117.113677] before memmap_init
> [ 117.118195] after memmap_init
>>>> memmap_init takes 4518 us
> [ 117.121446] before memmap_init
> [ 117.154992] after memmap_init
>>>> memmap_init takes 33546 us
> [ 117.158241] before memmap_init
> [ 117.161490] after memmap_init
>>>> memmap_init takes 3249 us
>>>> totally takes 41313 us
> With this patchset:
> [ 123.222962] before memmap_init
> [ 123.226819] after memmap_init
>>>> memmap_init takes 3857
> [ 123.230070] before memmap_init
> [ 123.247354] after memmap_init
>>>> memmap_init takes 17284
> [ 123.250604] before memmap_init
> [ 123.253852] after memmap_init
>>>> memmap_init takes 3248
>>>> totally takes 24389 us
> Attached the memblock region information in my server.
> [ 86.956758] Zone ranges:
> [ 86.959452] DMA [mem 0x0000000000200000-0x00000000ffffffff]
> [ 86.966041] Normal [mem 0x0000000100000000-0x00000017ffffffff]
> [ 86.972631] Movable zone start for each node
> [ 86.977179] Early memory node ranges
> [ 86.980985] node 0: [mem 0x0000000000200000-0x000000000021ffff]
> [ 86.987666] node 0: [mem 0x0000000000820000-0x000000000307ffff]
> [ 86.994348] node 0: [mem 0x0000000003080000-0x000000000308ffff]
> [ 87.001029] node 0: [mem 0x0000000003090000-0x00000000031fffff]
> [ 87.007710] node 0: [mem 0x0000000003200000-0x00000000033fffff]
> [ 87.014392] node 0: [mem 0x0000000003410000-0x000000000563ffff]
> [ 87.021073] node 0: [mem 0x0000000005640000-0x000000000567ffff]
> [ 87.027754] node 0: [mem 0x0000000005680000-0x00000000056dffff]
> [ 87.034435] node 0: [mem 0x00000000056e0000-0x00000000086fffff]
> [ 87.041117] node 0: [mem 0x0000000008700000-0x000000000871ffff]
> [ 87.047798] node 0: [mem 0x0000000008720000-0x000000000894ffff]
> [ 87.054479] node 0: [mem 0x0000000008950000-0x0000000008baffff]
> [ 87.061161] node 0: [mem 0x0000000008bb0000-0x0000000008bcffff]
> [ 87.067842] node 0: [mem 0x0000000008bd0000-0x0000000008c4ffff]
> [ 87.074524] node 0: [mem 0x0000000008c50000-0x0000000008e2ffff]
> [ 87.081205] node 0: [mem 0x0000000008e30000-0x0000000008e4ffff]
> [ 87.087886] node 0: [mem 0x0000000008e50000-0x0000000008fcffff]
> [ 87.094568] node 0: [mem 0x0000000008fd0000-0x000000000910ffff]
> [ 87.101249] node 0: [mem 0x0000000009110000-0x00000000092effff]
> [ 87.107930] node 0: [mem 0x00000000092f0000-0x000000000930ffff]
> [ 87.114612] node 0: [mem 0x0000000009310000-0x000000000963ffff]
> [ 87.121293] node 0: [mem 0x0000000009640000-0x000000000e61ffff]
> [ 87.127975] node 0: [mem 0x000000000e620000-0x000000000e64ffff]
> [ 87.134657] node 0: [mem 0x000000000e650000-0x000000000fffffff]
> [ 87.141338] node 0: [mem 0x0000000010800000-0x0000000017feffff]
> [ 87.148019] node 0: [mem 0x000000001c000000-0x000000001c00ffff]
> [ 87.154701] node 0: [mem 0x000000001c010000-0x000000001c7fffff]
> [ 87.161383] node 0: [mem 0x000000001c810000-0x000000007efbffff]
> [ 87.168064] node 0: [mem 0x000000007efc0000-0x000000007efdffff]
> [ 87.174746] node 0: [mem 0x000000007efe0000-0x000000007efeffff]
> [ 87.181427] node 0: [mem 0x000000007eff0000-0x000000007effffff]
> [ 87.188108] node 0: [mem 0x000000007f000000-0x00000017ffffffff]
> [ 87.194791] Initmem setup node 0 [mem 0x0000000000200000-0x00000017ffffffff]
>
> Changelog:
> V8: - introduce new config and move generic code to early_pfn.h
> - optimize memblock_next_valid_pfn as suggested by Matthew Wilcox
> V7: - fix i386 compilation error. refine the commit description
> V6: - simplify the codes, move arm/arm64 common codes to one file.
> - refine patches as suggested by Danial Vacek and Ard Biesheuvel
> V5: - further refining as suggested by Danial Vacek. Make codes
> arm/arm64 more arch specific
> V4: - refine patches as suggested by Danial Vacek and Wei Yang
> - optimized on arm besides arm64
> V3: - fix 2 issues reported by kbuild test robot
> V2: - rebase to mmotm latest
> - remain memblock_next_valid_pfn on arm64
> - refine memblock_search_pfn_regions and pfn_valid_region
>
> Jia He (6):
> arm: arm64: introduce CONFIG_HAVE_MEMBLOCK_PFN_VALID
> mm: page_alloc: remain memblock_next_valid_pfn() on arm/arm64
> arm: arm64: page_alloc: reduce unnecessary binary search in
> memblock_next_valid_pfn()
> mm/memblock: introduce memblock_search_pfn_regions()
> arm: arm64: introduce pfn_valid_region()
> mm: page_alloc: reduce unnecessary binary search in early_pfn_valid()
>
> arch/arm/Kconfig | 4 +++
> arch/arm/mm/init.c | 1 +
> arch/arm64/Kconfig | 4 +++
> arch/arm64/mm/init.c | 1 +
> include/linux/early_pfn.h | 79 +++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/memblock.h | 2 ++
> include/linux/mmzone.h | 18 ++++++++++-
> mm/Kconfig | 3 ++
> mm/memblock.c | 9 ++++++
> mm/page_alloc.c | 5 ++-
> 10 files changed, 124 insertions(+), 2 deletions(-)
> create mode 100644 include/linux/early_pfn.h
>

\
 
 \ /
  Last update: 2018-05-04 04:47    [W:0.114 / U:1.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site