Messages in this thread | | | Subject | Re: [PATCH v2 0/4] Add STM32 USBPHYC to stm32mp157c | From | Alexandre Torgue <> | Date | Thu, 3 May 2018 09:49:24 +0200 |
| |
Hi Amélie,
On 04/24/2018 11:41 AM, Amelie Delaunay wrote: > This series adds support for STM32 USB PHY Controller (USBPHYC) to > stm32mp157c SoC and enables it on stm32mp157c-ev1 board. > > --- > Changes in v2: > * Add reset dt-bindings include > * Add fixed regulators > * Enable CONFIG_PHY_STM32_USBPHYC in multi_v7_defconfig > > Amelie Delaunay (4): > ARM: dts: stm32: add USBPHYC support to stm32mp157c > ARM: dts: stm32: add supplies to usbphyc ports on stm32mp157c-ed1 > ARM: dts: stm32: enable USBPHYC on stm32mp157c-ev1 > ARM: multi_v7_defconfig: enable STM32 USB PHY Controller (USBPHYC) > > arch/arm/boot/dts/stm32mp157c-ed1.dts | 36 +++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/stm32mp157c-ev1.dts | 5 +++++ > arch/arm/boot/dts/stm32mp157c.dtsi | 21 ++++++++++++++++++++ > arch/arm/configs/multi_v7_defconfig | 1 + > 4 files changed, 63 insertions(+) >
Series applied on stm32-next. To avoid DTC warnings using W=12, I just renamed "vdd_usb" node by "vdd-usb".
Regards Alex
| |