lkml.org 
[lkml]   [2018]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/1] mmc: sdhci-pci-dwc-mshc: synopsys dwc mshc support
Date
Hi Andy,

Thanks for pointing all. We will fix it.

Regards,
Prabu

On 5/28/2018 5:49 PM, Andy Shevchenko wrote:
> On Tue, May 22, 2018 at 9:42 AM, Prabu Thangamuthu <Prabu.T@synopsys.com> wrote:
>> To enable Synopsys DWC MSHC controller on HPAS-DX platform connected using
>> PCIe interface. As Clock generation logic is implemented in MMCM module of
>> HAPS-DX platform, we have separate functions to control the MMCM to
>> generate required clocks with respect to speed mode. Also we have platform
>> specific set_power function to support different VDD of eMMC devices.
>> + * Authors:
>> + * Prabu Thangamuthu <prabu.t@synopsys.com>
>> + * Manjunath M B <manjumb@synopsys.com>
>> + *
> Redundant last line in above excerpt.
>
>> +#include <linux/pci.h>
>> +#include <linux/delay.h>
>> +#include <linux/module.h>
>> +#include <linux/moduleparam.h>
> This one is effectively included by module.h.
>
>> +/* Default emmc vdd is set to 3.3V */
>> +static unsigned int emmc_vdd = SDHC_EMMC_VDD_330V;
>> +module_param(emmc_vdd, int, 0444);
> This looks weird. Why do you need a module parameter?
>
>> + u16 clk = 0;
>> + u32 reg = 0;
>> + u32 vendor_ptr = 0;
> Why do above have assignments?
>
>> +MODULE_PARM_DESC(emmc_vdd, "VDD to configure eMMC device supply voltage");
> This better to be near to the parameter declaration. Though, as I said
> above, it feels wrong to have it in the first place.
>
>
>> +/* Synopsys Vendor Specific Registers */
>> +#define SDHC_GPIO_OUT 0x34
>> +#define SDHC_AT_CTRL_R 0x40
>> +
>> +#define SDHC_SW_TUNE_EN 0x00000010
>> +
>> +/* MMCM DRP */
>> +#define SDHC_MMCM_DIV_REG 0x1020
>> +#define DIV_REG_100_MHZ 0x1145
>> +
>> +#define SDHC_MMCM_CLKFBOUT 0x1024
>> +#define CLKFBOUT_100_MHZ 0x0000
>> +
>> +#define SDHC_CCLK_MMCM_RST 0x00000001
> Do you need these all in the header file? Why?
>
>
>> +#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xC202
> Absent blank line.
> Broken style of the value.
>
> Who knows what else wrong with this patch? Please, pay attention to
> the details and check twice before submit.
>


\
 
 \ /
  Last update: 2018-05-28 15:05    [W:0.082 / U:23.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site