lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] cpufreq: tegra20: Fix imbalanced clock enable count
From
Date
On 23.05.2018 13:44, Dmitry Osipenko wrote:
> On 23.05.2018 08:58, Viresh Kumar wrote:
>> On 23-05-18, 00:14, Dmitry Osipenko wrote:
>>> Tegra20-cpufreq driver missed enabling the CPU clocks. This results in a
>>> clock-enable refcount disbalance on PLL_P <-> PLL_X reparent, causing
>>> PLL_X to get disabled while it shouldn't. Fix this by enabling the clocks
>>> on the driver probe.
>>>
>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>> ---
>>>
>>> CPUFreq maintainers,
>>>
>>> Please take into account that this patch is made on top of my recent
>>> series of patches [0] "Clean up Tegra20 cpufreq driver" that was fully
>>> reviewed, but seems not applied yet. Let me know if you prefer to re-spin
>>> the [0], including this patch into the series.
>>>
>>> [0] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=45321
>>
>> This is already picked by Rafael and is sitting in pm/bleeding-edge
>> branch. Should get merged into linux-next in a day or two.
>>
>>> drivers/cpufreq/tegra20-cpufreq.c | 16 +++++++++++++++-
>>> 1 file changed, 15 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
>>> index 05f57dcd5215..ca5229265b60 100644
>>> --- a/drivers/cpufreq/tegra20-cpufreq.c
>>> +++ b/drivers/cpufreq/tegra20-cpufreq.c
>>> @@ -176,6 +176,14 @@ static int tegra20_cpufreq_probe(struct platform_device *pdev)
>>> goto put_pll_x;
>>> }
>>>
>>> + err = clk_prepare_enable(cpufreq->pll_x_clk);
>>> + if (err)
>>> + goto put_pll_p;
>>> +
>>> + err = clk_prepare_enable(cpufreq->pll_p_clk);
>>> + if (err)
>>> + goto disable_pll_x;
>>> +
>>> cpufreq->dev = &pdev->dev;
>>> cpufreq->driver.get = cpufreq_generic_get;
>>> cpufreq->driver.attr = cpufreq_generic_attr;
>>> @@ -192,12 +200,16 @@ static int tegra20_cpufreq_probe(struct platform_device *pdev)
>>>
>>> err = cpufreq_register_driver(&cpufreq->driver);
>>> if (err)
>>> - goto put_pll_p;
>>> + goto disable_pll_p;
>>>
>>> platform_set_drvdata(pdev, cpufreq);
>>>
>>> return 0;
>>>
>>> +disable_pll_p:
>>> + clk_disable_unprepare(cpufreq->pll_p_clk);
>>> +disable_pll_x:
>>> + clk_disable_unprepare(cpufreq->pll_x_clk);
>>> put_pll_p:
>>> clk_put(cpufreq->pll_p_clk);
>>> put_pll_x:
>>> @@ -214,6 +226,8 @@ static int tegra20_cpufreq_remove(struct platform_device *pdev)
>>>
>>> cpufreq_unregister_driver(&cpufreq->driver);
>>>
>>> + clk_disable_unprepare(cpufreq->pll_p_clk);
>>> + clk_disable_unprepare(cpufreq->pll_x_clk);
>>> clk_put(cpufreq->pll_p_clk);
>>> clk_put(cpufreq->pll_x_clk);
>>> clk_put(cpufreq->cpu_clk);
>>
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>>
>
> Please hold on this patch, seems I interpreted the cpufreq driver logic
> incorrectly and it is probably fine as it is. I'll re-check later today.
>

I've re-checked the driver and it is fine, PLL_X disabling is expected on a
switching parent clock to PLL_P as for the target frequency. This patch isn't
needed, please scratch it.

It occurred to me that the driver could be improved further a tad while I was
performing the re-check, hence likely there will be couple more patches from me.

\
 
 \ /
  Last update: 2018-05-23 16:46    [W:0.149 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site