lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] ARM: dts: imx6ull: add operating points
Date
i.MX6ULL has different operating ranges than i.MX6UL so add the
operating points for the i.MX6ULL. A 25mV offset is added to the minimum
allowed values like for the i.MX6UL.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---

Changes for v3:
- none

Changes for v2:
- Fix soc-operating-points voltage for 792MHz and 900MHz

arch/arm/boot/dts/imx6ull.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 571ddd71cdba..530d5526b890 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -46,6 +46,25 @@
/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
/delete-node/ &uart8;

+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 900000 1275000
+ 792000 1225000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 900000 1175000
+ 792000 1175000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
+
/ {
soc {
aips3: aips-bus@2200000 {
--
2.16.1
\
 
 \ /
  Last update: 2018-05-22 09:35    [W:0.110 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site