lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 05/14] mtd: rawnand: qcom: wait for desc completion in all BAM channels
Hi Abhishek,

On Thu, 3 May 2018 17:50:32 +0530, Abhishek Sahu
<absahu@codeaurora.org> wrote:

> The BAM has 3 channels - tx, rx and command. command channel
> is used for register read/writes, tx channel for data writes
> and rx channel for data reads. Currently, the driver assumes the
> transfer completion once it gets all the command descriptor
> completed. Sometimes, there is race condition in data channel

"Sometimes, there is a race condition between the data channel (rx/tx)
and the command channel completion. In these cases, ..."

> (tx/rx) and command channel completion and in these cases,
> the data in buffer is not valid during the small window between

^ present in the buffer ?

> command descriptor completion and data descriptor completion.
>
> Now, the changes have been made to assign the callback for

It is preferable to use a descriptive tense when you expose what the
patch does. Something like "Change <this> to assign ..."

> channel's final descriptor. The DMA will generate the callback
> when all the descriptors have completed in that channel.
> The NAND transfer will be completed only when all required
> DMA channels have generated the completion callback.
>

It looks like this is a fix that is a good candidate for stable trees,
you might want to add the relevant tags.

> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> ---
> * Changes from v1:
>
> NONE
>
> 1. Removed the custom logic and used the helper fuction.
> drivers/mtd/nand/raw/qcom_nandc.c | 55 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 54 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index a8d71ce..3d1ff54 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -213,6 +213,8 @@
> #define QPIC_PER_CW_CMD_SGL 32
> #define QPIC_PER_CW_DATA_SGL 8
>
> +#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000)

That's huge, but why not, it's a timeout anyway.

> +
> /*
> * Flags used in DMA descriptor preparation helper functions
> * (i.e. read_reg_dma/write_reg_dma/read_data_dma/write_data_dma)
> @@ -245,6 +247,11 @@
> * @tx_sgl_start - start index in data sgl for tx.
> * @rx_sgl_pos - current index in data sgl for rx.
> * @rx_sgl_start - start index in data sgl for rx.
> + * @first_chan_done - if current transfer already has got first channel
> + * DMA desc completion.
> + * @txn_done - completion for nand transfer.

s/nand/NAND/

> + * @last_data_desc - last DMA desc in data channel (tx/rx).
> + * @last_cmd_desc - last DMA desc in command channel.
> */
> struct bam_transaction {
> struct bam_cmd_element *bam_ce;
> @@ -258,6 +265,10 @@ struct bam_transaction {
> u32 tx_sgl_start;
> u32 rx_sgl_pos;
> u32 rx_sgl_start;
> + bool first_chan_done;
> + struct completion txn_done;
> + struct dma_async_tx_descriptor *last_data_desc;
> + struct dma_async_tx_descriptor *last_cmd_desc;
> };
>
> /*
> @@ -504,6 +515,8 @@ static void free_bam_transaction(struct qcom_nand_controller *nandc)
>
> bam_txn->data_sgl = bam_txn_buf;
>
> + init_completion(&bam_txn->txn_done);
> +
> return bam_txn;
> }
>
> @@ -523,11 +536,36 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc)
> bam_txn->tx_sgl_start = 0;
> bam_txn->rx_sgl_pos = 0;
> bam_txn->rx_sgl_start = 0;
> + bam_txn->last_data_desc = NULL;
> + bam_txn->first_chan_done = false;

Are you sure you don't want to reinit last_cmd_desc here?

>
> sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage *
> QPIC_PER_CW_CMD_SGL);
> sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage *
> QPIC_PER_CW_DATA_SGL);
> +
> + reinit_completion(&bam_txn->txn_done);
> +}
> +
> +/* Callback for DMA descriptor completion */
> +static void qpic_bam_dma_done(void *data)
> +{
> + struct bam_transaction *bam_txn = data;
> +
> + /*
> + * In case of data transfer with NAND, 2 callbacks will be generated.
> + * One for command channel and another one for data channel.
> + * If current transaction has data descriptors then check if its
> + * already got one DMA channel completion callback. In this case
> + * make the NAND transfer complete otherwise mark first_chan_done true
> + * and wait for next channel DMA completion callback.
> + */
> + if (bam_txn->last_data_desc && !bam_txn->first_chan_done) {
> + bam_txn->first_chan_done = true;
> + return;
> + }

There is a lot of new variables just to wait for two bam_dma_done().
Why not just creating a boolean like "wait_second completion",
initialize it in prepare_bam_async_desc to true when needed and
complete txn_done when it's false, that's all:

if (bam_txn->wait_second_completion) {
bam_txn->wait_second_completion = false;
return;
}

> +
> + complete(&bam_txn->txn_done);
> }
>
> static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
> @@ -756,6 +794,12 @@ static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
>
> desc->dma_desc = dma_desc;
>
> + /* update last data/command descriptor */
> + if (chan == nandc->cmd_chan)
> + bam_txn->last_cmd_desc = dma_desc;
> + else
> + bam_txn->last_data_desc = dma_desc;
> +

Is there a reason for the "last_" prefix? why not current_*_desc or
just *_desc? (this is a real question :) ). Correct me if I'm wrong but
you have a scatter-gather list of DMA transfers that are mapped to form
one DMA descriptor, so there is no "last" descriptor, right?

Otherwise, as I told you above, why not just a:

if (chan == nandc->data_chan)
bam_txn->wait_second_completion = true;

> list_add_tail(&desc->node, &nandc->desc_list);
> return 0;
> @@ -1273,10 +1317,19 @@ static int submit_descs(struct qcom_nand_controller *nandc)
> cookie = dmaengine_submit(desc->dma_desc);
>
> if (nandc->props->is_bam) {
> + bam_txn->last_cmd_desc->callback = qpic_bam_dma_done;
> + bam_txn->last_cmd_desc->callback_param = bam_txn;
> + if (bam_txn->last_data_desc) {
> + bam_txn->last_data_desc->callback = qpic_bam_dma_done;
> + bam_txn->last_data_desc->callback_param = bam_txn;
> + }

Why don't you do this directly in prepare_bam_async_desc?

With:

dma_desc->callback = ...
dma_desc->callback_param = ...

> +
> dma_async_issue_pending(nandc->tx_chan);
> dma_async_issue_pending(nandc->rx_chan);
> + dma_async_issue_pending(nandc->cmd_chan);
>
> - if (dma_sync_wait(nandc->cmd_chan, cookie) != DMA_COMPLETE)
> + if (!wait_for_completion_timeout(&bam_txn->txn_done,
> + QPIC_NAND_COMPLETION_TIMEOUT))
> return -ETIMEDOUT;
> } else {
> if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)



--
Miquel Raynal, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-05-22 08:48    [W:0.940 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site