lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 3/3] Documentation/bindings: net: the sfp i2c-bus property is now mandatory
Date
The i2c-bus property for sfp modules was made mandatory. Update the
documentation to keep it in sync with the driver's behaviour.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
Documentation/devicetree/bindings/net/sff,sfp.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
index 929591d52ed6..832139919f20 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.txt
+++ b/Documentation/devicetree/bindings/net/sff,sfp.txt
@@ -7,11 +7,11 @@ Required properties:
"sff,sfp" for SFP modules
"sff,sff" for soldered down SFF modules

-Optional Properties:
-
- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
interface

+Optional Properties:
+
- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
module presence input gpio signal, active (module absent) high. Must
not be present for SFF modules
--
2.17.0
\
 
 \ /
  Last update: 2018-05-22 12:20    [W:0.051 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site