Messages in this thread | | | From | Jeffrin Thalakkottoor <> | Date | Sun, 20 May 2018 17:27:32 +0530 | Subject | Re: PROBLEM: mce: [Hardware Error] from dmesg -l emerg |
| |
output for "dmesg | mcelog --ascii" command related
---------------------------------------------------------------------------------------------------------------------------------------------------------------------> microcode: microcode updated early to revision 0x2a, date = 2018-01-18 Linux version 4.17.0-rc5+ (root@debian) (gcc version 7.3.0 (Debian 7.3.0-19)) #31 SMP Sun May 20 16:45:54 IST 2018 Command line: BOOT_IMAGE=/boot/vmlinuz-4.17.0-rc5+ root=UUID=e78bf553-c8fd-42a0-b6f8-5876e86bc14e ro quiet x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000009bbddfff] usable BIOS-e820: [mem 0x000000009bbde000-0x000000009bdddfff] type 20 BIOS-e820: [mem 0x000000009bdde000-0x000000009cc8dfff] reserved BIOS-e820: [mem 0x000000009cc8e000-0x000000009cf8dfff] ACPI NVS BIOS-e820: [mem 0x000000009cf8e000-0x000000009cffdfff] ACPI data BIOS-e820: [mem 0x000000009cffe000-0x000000009cffefff] usable BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable NX (Execute Disable) protection: active efi: EFI v2.40 by INSYDE Corp. efi: SMBIOS=0x9be81000 ESRT=0x9bfa8218 ACPI 2.0=0x9cffd014 SMBIOS 2.8 present. DMI: Hewlett-Packard HP Notebook/80C1, BIOS F.02 03/24/2015 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x15f000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E7FFF write-protect E8000-EFFFF write-combining F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask 7E00000000 write-back 1 base 009CFFF000 mask 7FFFFFF000 uncachable 2 base 009D000000 mask 7FFF000000 uncachable 3 base 009E000000 mask 7FFE000000 uncachable 4 base 00A0000000 mask 7FE0000000 uncachable 5 base 00C0000000 mask 7FC0000000 uncachable 6 disabled 7 disabled 8 disabled 9 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT e820: update [mem 0x9cfff000-0xffffffff] usable ==> reserved e820: last_pfn = 0x9cfff max_arch_pfn = 0x400000000 esrt: Reserving ESRT space from 0x000000009bfa8218 to 0x000000009bfa8250. Base memory trampoline at [ (ptrval)] 2e000 size 24576 Using GB pages for direct mapping BRK [0x152473000, 0x152473fff] PGTABLE BRK [0x152474000, 0x152474fff] PGTABLE BRK [0x152475000, 0x152475fff] PGTABLE BRK [0x152476000, 0x152476fff] PGTABLE BRK [0x152477000, 0x152477fff] PGTABLE BRK [0x152478000, 0x152478fff] PGTABLE BRK [0x152479000, 0x152479fff] PGTABLE BRK [0x15247a000, 0x15247afff] PGTABLE Secure boot could not be determined RAMDISK: [mem 0x32681000-0x35337fff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x000000009CFFD014 000024 (v02 HPQOEM) ACPI: XSDT 0x000000009CFC5188 0000D4 (v01 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 0x000000009CFEA000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) ACPI: DSDT 0x000000009CFD5000 00F690 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000) ACPI: FACS 0x000000009CF86000 000040 ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: UEFI 0x000000009CFFB000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000) ACPI: SSDT 0x000000009CFF4000 006647 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) ACPI: SSDT 0x000000009CFEF000 003AA0 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) ACPI: ASF! 0x000000009CFEE000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000) ACPI: ASPT 0x000000009CFED000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000) ACPI: BOOT 0x000000009CFEC000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: DBGP 0x000000009CFEB000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000) ACPI: HPET 0x000000009CFE9000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: LPIT 0x000000009CFE8000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000) ACPI: APIC 0x000000009CFE7000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) ACPI: MCFG 0x000000009CFE6000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: WDAT 0x000000009CFE5000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: SSDT 0x000000009CFD1000 003003 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) ACPI: SSDT 0x000000009CFD0000 000C12 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) ACPI: SSDT 0x000000009CFCF000 000539 (v02 HPQOEM INSYDE 00003000 ACPI 00040000) ACPI: SSDT 0x000000009CFCE000 000B74 (v02 HPQOEM INSYDE 00003000 ACPI 00040000) ACPI: SSDT 0x000000009CFC8000 005FC2 (v02 HPQOEM INSYDE 00003000 ACPI 00040000) ACPI: DMAR 0x000000009CFC7000 0000B0 (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: FPDT 0x000000009CFC6000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) ACPI: BGRT 0x000000009CFC4000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000015effffff] NODE_DATA(0) allocated [mem 0x15effb000-0x15effffff] tsc: Fast TSC calibration using PIT Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000015effffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x0000000000087fff] node 0: [mem 0x0000000000100000-0x000000009bbddfff] node 0: [mem 0x000000009cffe000-0x000000009cffefff] node 0: [mem 0x0000000100000000-0x000000015effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff] On node 0 totalpages: 1026917 DMA zone: 64 pages used for memmap DMA zone: 96 pages reserved DMA zone: 3974 pages, LIFO batch:0 DMA32 zone: 9904 pages used for memmap DMA32 zone: 633823 pages, LIFO batch:31 Normal zone: 6080 pages used for memmap Normal zone: 389120 pages, LIFO batch:31 Reserved but unavailable: 100 pages Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff] ACPI: PM-Timer IO Port: 0x1808 ACPI: Local APIC address 0xfee00000 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: Registered nosave memory: [mem 0x9bbde000-0x9bdddfff] PM: Registered nosave memory: [mem 0x9bdde000-0x9cc8dfff] PM: Registered nosave memory: [mem 0x9cc8e000-0x9cf8dfff] PM: Registered nosave memory: [mem 0x9cf8e000-0x9cffdfff] PM: Registered nosave memory: [mem 0x9cfff000-0x9dffffff] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns random: get_random_bytes called from start_kernel+0x94/0x4d3 with crng_init=0 setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 44 pages/cpu @ (ptrval) s142040 r8192 d29992 u524288 pcpu-alloc: s142040 r8192 d29992 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists, mobility grouping on. Total pages: 1010773 Policy zone: Normal Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.0-rc5+ root=UUID=e78bf553-c8fd-42a0-b6f8-5876e86bc14e ro quiet Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3719392K/4107668K available (10252K kernel code, 1267K rwdata, 3288K rodata, 1572K init, 668K bss, 388276K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Kernel/User page tables isolation: enabled ftrace: allocating 31320 entries in 123 pages Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 33024, nr_irqs: 728, preallocated irqs: 16 Console: colour dummy device 80x25 console [tty0] enabled ACPI: Core revision 20180313 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns hpet clockevent registered APIC: Switch to symmetric I/O mode setup DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da DMAR: RMRR base: 0x0000009cc63000 end: 0x0000009cc82fff DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 DMAR-IR: HPET id 0 under DRHD base 0xfed91000 DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. DMAR-IR: Enabled IRQ remapping in xapic mode x2apic: IRQ remapping doesn't support X2APIC mode ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 tsc: Fast TSC calibration using PIT tsc: Detected 1895.623 MHz processor clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x36a60aaf4fd, max_idle_ns: 881590650275 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.24 BogoMIPS (lpj=7582492) pid_max: default: 32768 minimum: 301 Security Framework initialized Yama: becoming mindful. AppArmor: AppArmor initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 7 MCE banks CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Spectre V2 : Mitigation: Full generic retpoline Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier Spectre V2 : Enabling Restricted Speculation for firmware calls Freeing SMP alternatives memory: 32K Hardware event. This is not a software error. CPU 0 BANK 0 TSC dead STATUS 0 MCGSTATUS 0 line timer enabled smpboot: CPU0: Intel(R) Pentium(R) CPU 3825U @ 1.90GHz (family: 0x6, model: 0x3d, stepping: 0x4) Machine check events logged Hardware event. This is not a software error. CPU 0 BANK 0 TIME 1526815774 Sun May 20 16:59:34 2018 MCG status: MCi status: Machine check not valid Corrected error MCA: No Error STATUS 0 MCGSTATUS 0 CPUID Vendor Intel Family 6 Model 61 (Fields were incomplete) SOCKET 0 APIC 0 microcode 2a Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Hierarchical SRCU implementation. NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 smp: Brought up 1 node, 4 CPUs smpboot: Max logical packages: 1 smpboot: Total of 4 processors activated (15164.98 BogoMIPS) devtmpfs: initialized x86/mm: Memory block size: 128MB PM: Registering ACPI NVS region [mem 0x9cc8e000-0x9cf8dfff] (3145728 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(1526815774.048:1): state=initialized audit_enabled=0 res=1 cpuidle: using governor ladder cpuidle: using governor menu Simple Boot Flag at 0x44 set to 0x1 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. PCI: Using configuration type 1 for base access HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: 8 ACPI AML tables successfully acquired and loaded ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF987E99253000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF987E9915A000 0005AA (v02 PmRef ApIst 00003000 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF987E992D2800 000119 (v02 PmRef ApCst 00003000 INTL 20130117) ACPI: EC: EC started ACPI: EC: interrupt blocked ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Enabled 8 GPEs in block 00 to 7F ACPI: Power Resource [FN00] (off) ACPI: Power Resource [FN01] (off) ACPI: Power Resource [FN02] (off) ACPI: Power Resource [FN03] (off) ACPI: Power Resource [FN04] (off) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 pci 0000:00:02.0: [8086:1606] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] pci 0000:00:02.0: BAR 2: assigned to efifb pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 pci 0000:00:03.0: reg 0x10: [mem 0xc1318000-0xc131bfff 64bit] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 pci 0000:00:04.0: reg 0x10: [mem 0xc1310000-0xc1317fff 64bit] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 pci 0000:00:14.0: reg 0x10: [mem 0xc1300000-0xc130ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0xc1321000-0xc132101f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xc131c000-0xc131ffff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 0x10: [mem 0xc1325000-0xc13253ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100 pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] pci 0000:00:1f.2: reg 0x24: [mem 0xc1324000-0xc13247ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x10: [mem 0xc1320000-0xc13200ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 pci 0000:00:1f.6: reg 0x10: [mem 0xc1323000-0xc1323fff 64bit] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] pci 0000:02:00.0: reg 0x18: [mem 0xc1200000-0xc1200fff 64bit] pci 0000:02:00.0: reg 0x20: [mem 0xc1000000-0xc1003fff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.2: PCI bridge to [bus 02] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xc1200000-0xc12fffff] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc10fffff 64bit pref] pci 0000:03:00.0: [14e4:4365] type 00 class 0x028000 pci 0000:03:00.0: reg 0x10: [mem 0xc1100000-0xc1107fff 64bit] pci 0000:03:00.0: enabling Extended Tags pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PCI bridge to [bus 03] pci 0000:00:1c.5: bridge window [mem 0xc1100000-0xc11fffff] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7 ACPI: EC: interrupt unblocked ACPI: EC: event unblocked ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:00:02.0: vgaarb: bridge control possible vgaarb: loaded pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Registered efivars operations PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] e820: reserve RAM buffer [mem 0x9bbde000-0x9bffffff] e820: reserve RAM buffer [mem 0x9cfff000-0x9fffffff] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter clocksource: Switched to clocksource tsc-early VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) AppArmor: AppArmor Filesystem Enabled pnp: PnP ACPI init system 00:00: [io 0x0680-0x069f] has been reserved system 00:00: [io 0xfd60-0xfd63] has been reserved system 00:00: [io 0xffff] has been reserved system 00:00: [io 0xffff] has been reserved system 00:00: [io 0xffff] has been reserved system 00:00: [io 0x1800-0x18fe] has been reserved system 00:00: [io 0x164e-0x164f] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) system 00:02: [io 0x1854-0x1857] has been reserved system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:04: Plug and Play ACPI device, IDs SYN1efb SYN1e00 SYN0002 PNP0f13 (active) system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved system 00:06: [mem 0xe0000000-0xefffffff] has been reserved system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:06: [mem 0xff000000-0xff000fff] has been reserved system 00:06: [mem 0xff010000-0xffffffff] could not be reserved system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 7 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 02] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xc1200000-0xc12fffff] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc10fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 03] pci 0000:00:1c.5: bridge window [mem 0xc1100000-0xc11fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc12fffff] pci_bus 0000:02: resource 2 [mem 0xc1000000-0xc10fffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xc1100000-0xc11fffff] NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:14.0: can't derive routing for PCI INT A pci 0000:00:14.0: PCI INT A: no GSI pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 18428 usecs PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 45788K PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0x8f15b000-0x9315b000] (64MB) mapped at [ (ptrval)- (ptrval)] Initialise system trusted keyrings workingset: timestamp_bits=40 max_order=20 bucket_order=0 zbud: loaded pstore: using deflate compression Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered test_firmware: interface ready efifb: probing for efifb efifb: framebuffer at 0xb0000000, using 4160k, total 4160k efifb: mode is 1366x768x32, linelength=5504, pages=1 efifb: scrolling: redraw efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 170x48 fb0: EFI VGA frame buffer device intel_idle: MWAIT substates: 0x11142120 intel_idle: v0.4.1 model 0x3D intel_idle: lapic_timer_reliable_states 0xffffffff Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Linux agpgart interface v0.103 AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> AMD IOMMUv2 functionality not available on this system i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: registered as rtc0 rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs intel_pstate: Intel P-state driver initializing ledtrig-cpu: registered to indicate activity on CPUs NET: Registered protocol family 10 Segment Routing with IPv6 mip6: Mobile IPv6 NET: Registered protocol family 17 mpls_gso: MPLS GSO support microcode: sig=0x306d4, pf=0x40, revision=0x2a microcode: Microcode Update Driver: v2.2. sched_clock: Marking stable (1580748597, 0)->(3167933312, -1587184715) registered taskstats version 1 Loading compiled-in X.509 certificates zswap: loaded using pool lzo/zbud AppArmor: AppArmor sha1 policy hashing enabled ima: No TPM chip found, activating TPM-bypass! (rc=-19) ima: Allocated hash algorithm: sha256 rtc_cmos 00:01: setting system clock to 2018-05-20 11:29:37 UTC (1526815777) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Freeing unused kernel memory: 1572K Write protecting the kernel read-only data: 16384k Freeing unused kernel memory: 2008K Freeing unused kernel memory: 808K x86/mm: Checked W+X mappings: passed, no W+X pages found. x86/mm: Checking user space page tables x86/mm: Checked W+X mappings: passed, no W+X pages found. hidraw: raw HID events driver (C) Jiri Kosina ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.LPCB.HEC.ECWT], AE_NOT_FOUND (20180313/psargs-330) ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20180313/psparse-516) acpi PNP0C0B:00: Failed to change power state to D0 ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.LPCB.HEC.ECWT], AE_NOT_FOUND (20180313/psargs-330) ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20180313/psparse-516) ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20180313/psargs-330) ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_NOT_FOUND (20180313/psparse-516) acpi PNP0C0B:00: Failed to set initial power state acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20180313/psargs-330) ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_NOT_FOUND (20180313/psparse-516) ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20180313/psargs-330) ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_NOT_FOUND (20180313/psparse-516) ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20180313/psargs-330) ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_NOT_FOUND (20180313/psparse-516) thermal LNXTHERM:02: registered as thermal_zone0 ACPI: Thermal Zone [TZ02] (28 C) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control r8169 0000:02:00.0 eth0: RTL8106e at 0x (ptrval), 48:0f:cf:df:14:80, XID 04900000 IRQ 42 ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i801_smbus 0000:00:1f.3: SPD Write Disable is set i801_smbus 0000:00:1f.3: SMBus using PCI interrupt SCSI subsystem initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1d.0: debug port 2 libata version 3.00 loaded. ehci-pci 0000:00:1d.0: cache line size of 64 is not supported ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1325000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.17.0-rc5+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A xhci_hcd 0000:00:14.0: PCI INT A: no GSI xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 xhci_hcd 0000:00:14.0: cache line size of 64 is not supported usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.17.0-rc5+ xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 11 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 4.17.0-rc5+ xhci-hcd usb usb3: SerialNumber: 0000:00:14.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst scsi host0: ahci scsi host1: ahci ata1: SATA max UDMA/133 abar m2048@0xc1324000 port 0xc1324100 irq 44 ata2: SATA max UDMA/133 abar m2048@0xc1324000 port 0xc1324180 irq 44 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P2C, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ATAPI: hp DVDRW GUB0N, UB00, max UDMA/133 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 2C PQ: 0 ANSI: 5 ata2.00: configured for UDMA/133 usb 1-1: new high-speed USB device number 2 using ehci-pci usb 2-4: new full-speed USB device number 2 using xhci_hcd scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA tsc: Refined TSC clocksource calibration: 1895.611 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a5f415104, max_idle_ns: 881590682539 ns clocksource: Switched to clocksource tsc sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 sda3 sda4 sda5 sd 0:0:0:0: [sda] Attached SCSI disk usb 2-4: New USB device found, idVendor=0a5c, idProduct=216d, bcdDevice= 1.12 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-4: Product: BCM43142A0 usb 2-4: Manufacturer: Broadcom Corp usb 2-4: SerialNumber: D85DE2C6DEC4 usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 8 ports detected usb 2-5: new high-speed USB device number 3 using xhci_hcd random: fast init done psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786 usb 2-5: New USB device found, idVendor=064e, idProduct=930b, bcdDevice= 1.01 usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 2-5: Product: HP Truevision HD usb 2-5: Manufacturer: SuYin usb 2-5: SerialNumber: HF1026-T841-HN01-1-REV0101 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 PM: Image not found (code -22) EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) random: crng init done systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture x86-64. systemd[1]: Set hostname to <debian>. systemd[1]: Listening on udev Kernel Socket. systemd[1]: Created slice User and Session Slice. systemd[1]: Reached target Slices. systemd[1]: Listening on Journal Socket (/dev/log). systemd[1]: Created slice system-getty.slice. systemd[1]: Reached target User and Group Name Lookups. systemd[1]: Listening on udev Control Socket. lp: driver loaded but no devices found ppdev: user-space parallel port driver EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro loop: module loaded systemd-journald[207]: Received request to flush runtime journal from PID 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button [PWRF] input: HP Wireless hotkeys as /devices/virtual/input/input6 ACPI: AC Adapter [ACAD] (on-line) wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found [Firmware Bug]: battery: (dis)charge rate invalid. ACPI: Battery Slot [BAT1] (battery present) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 EFI Variables Facility v0.08 2004-May-17 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pstore: Registered efi as persistent store backend input: PC Speaker as /devices/platform/pcspkr/input/input7 RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 cfg80211: failed to load regulatory.db media: Linux media interface: v0.10 snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 snd_hda_codec_realtek hdaudioC1D0: inputs: snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 Linux video capture interface: v2.00 cryptd: max_cpu_qlen set to 1000 wl: loading out-of-tree module taints kernel. wl: module license 'MIXED/Proprietary' taints kernel. Disabling lock debugging due to kernel taint wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:930b) uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized! uvcvideo 2-5:1.0: Entity type for entity Processing 2 was not initialized! uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized! input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) hp_wmi: query 0xd returned error 0x5 input: HP WMI hotkeys as /devices/virtual/input/input12 checking generic (b0000000 410000) vs hw (b0000000 10000000) fb: switching to inteldrmfb from EFI VGA Console: switching to colour dummy device 80x25 [drm] Replacing VGA console driver [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem usbcore: registered new interface driver btusb [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) Bluetooth: hci0: BCM: chip id 70 Bluetooth: hci0: BCM: features 0x06 fbcon: inteldrmfb (fb0) is primary device Bluetooth: hci0: debian-0 Bluetooth: hci0: BCM (001.001.011) build 0000 bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2 Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found intel_rapl: Found RAPL domain package intel_rapl: Found RAPL domain core intel_rapl: Found RAPL domain uncore intel_rapl: Found RAPL domain dram intel_rapl: RAPL package 0 domain package locked by BIOS intel_rapl: RAPL package 0 domain dram locked by BIOS wl 0000:03:00.0 wlp3s0: renamed from wlan0 Console: switching to colour frame buffer device 170x48 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 Bluetooth: hci0: command 0x1003 tx timeout Adding 4107260k swap on /dev/sda3. Priority:-2 extents:1 across:4107260k FS audit: type=1400 audit(1526815799.521:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=596 comm="apparmor_parser" audit: type=1400 audit(1526815799.521:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=596 comm="apparmor_parser" audit: type=1400 audit(1526815799.521:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=596 comm="apparmor_parser" audit: type=1400 audit(1526815799.561:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=598 comm="apparmor_parser" audit: type=1400 audit(1526815799.645:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=599 comm="apparmor_parser" audit: type=1400 audit(1526815799.669:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=605 comm="apparmor_parser" audit: type=1400 audit(1526815800.217:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=609 comm="apparmor_parser" audit: type=1400 audit(1526815800.221:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=609 comm="apparmor_parser" audit: type=1400 audit(1526815800.221:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=609 comm="apparmor_parser" audit: type=1400 audit(1526815800.729:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=607 comm="apparmor_parser" r8169 0000:02:00.0 eth0: link down IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized r8169 0000:02:00.0 eth0: link up IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Bluetooth: hci0: command 0x1003 tx timeout IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 fuse init (API version 7.26) rfkill: input handler disabled r8169 0000:02:00.0 eth0: link down r8169 0000:02:00.0 eth0: link up
---------------------------------------------------------------------------------------------------------------------------------------------------------------->
On Mon, May 14, 2018 at 9:57 PM, Borislav Petkov <bp@alien8.de> wrote: > On Mon, May 14, 2018 at 09:19:11PM +0530, Jeffrin Thalakkottoor wrote: >> hello, >> >> output related of "sudo dmesg -l emerg" from my laptop... >> >> ---------------------------------------------------------------------------------------------------> >> $sudo dmesg -l emerg >> [sudo] password for jeffrin: >> [ 0.041023] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 5: >> ee0000000040110b >> [ 0.041028] mce: [Hardware Error]: TSC 0 ADDR 160000080 MISC 5040008086 >> [ 0.041034] mce: [Hardware Error]: PROCESSOR 0:306d4 TIME >> 1526300792 SOCKET 0 APIC 0 microcode 2a > > Run it through mcelog to see what it decodes to: > > dmesg | mcelog --ascii > > -- > Regards/Gruss, > Boris. > > Good mailing practices for 400: avoid top-posting and trim the reply.
-- software engineer rajagiri school of engineering and technology
| |