lkml.org 
[lkml]   [2018]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] md/raid1: add error handling of read error from FailFast device
Date
Current handle_read_error() function calls fix_read_error()
only if md device is RW and rdev does not include FailFast flag.
It does not handle a read error from a RW device including
FailFast flag.

I am not sure it is intended. But I found that write IO error
sets rdev faulty. The md module should handle the read IO error and
write IO error equally. So I think read IO error should set rdev faulty.

Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
---
drivers/md/raid1.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index e9e3308cb0a7..4445179aa4c8 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2474,6 +2474,8 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
fix_read_error(conf, r1_bio->read_disk,
r1_bio->sector, r1_bio->sectors);
unfreeze_array(conf);
+ } else if (mddev->ro == 0 && test_bit(FailFast, &rdev->flags)) {
+ md_error(mddev, rdev);
} else {
r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED;
}
--
2.14.1
\
 
 \ /
  Last update: 2018-05-02 13:09    [W:0.320 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site