lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] dt-bindings: power: Add ZynqMP power domain bindings
Date
Hi Marek,

> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org [mailto:linux-kernel-
> owner@vger.kernel.org] On Behalf Of Jolly Shah
> Sent: Thursday, March 15, 2018 10:47 AM
> To: Marek Szyprowski <m.szyprowski@samsung.com>; Geert Uytterhoeven
> <geert@linux-m68k.org>; Rob Herring <robh@kernel.org>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>; Andy Gross
> <andy.gross@linaro.org>; Shawn Guo <shawnguo@kernel.org>; Geert
> Uytterhoeven <geert+renesas@glider.be>; Björn Andersson
> <bjorn.andersson@linaro.org>; sean.wang@mediatek.com; Michal Simek
> <michal.simek@xilinx.com>; Mark Rutland <mark.rutland@arm.com>; Rajan
> Vaja <RAJANV@xilinx.com>; open list:OPEN FIRMWARE AND FLATTENED
> DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; Linux ARM <linux-arm-
> kernel@lists.infradead.org>; Linux Kernel Mailing List <linux-
> kernel@vger.kernel.org>
> Subject: RE: [PATCH 1/2] dt-bindings: power: Add ZynqMP power domain
> bindings
>
> [This sender failed our fraud detection checks and may not be who they appear
> to be. Learn about spoofing at http://aka.ms/LearnAboutSpoofing]
>
> Hi Rob, Geert, Marek,
>
> > -----Original Message-----
> > From: Marek Szyprowski [mailto:m.szyprowski@samsung.com]
> > Sent: Tuesday, March 06, 2018 12:06 AM
> > To: Geert Uytterhoeven <geert@linux-m68k.org>; Rob Herring
> > <robh@kernel.org>
> > Cc: Jolly Shah <JOLLYS@xilinx.com>; Matthias Brugger
> > <matthias.bgg@gmail.com>; Andy Gross <andy.gross@linaro.org>; Shawn
> > Guo <shawnguo@kernel.org>; Geert Uytterhoeven
> > <geert+renesas@glider.be>; Björn Andersson
> > <bjorn.andersson@linaro.org>; sean.wang@mediatek.com; Michal Simek
> > <michal.simek@xilinx.com>; Mark Rutland <mark.rutland@arm.com>; Rajan
> > Vaja <RAJANV@xilinx.com>; open list:OPEN FIRMWARE AND FLATTENED
> DEVICE
> > TREE BINDINGS <devicetree@vger.kernel.org>; Linux ARM <linux-arm-
> > kernel@lists.infradead.org>; Linux Kernel Mailing List <linux-
> > kernel@vger.kernel.org>; Jolly Shah <JOLLYS@xilinx.com>
> > Subject: Re: [PATCH 1/2] dt-bindings: power: Add ZynqMP power domain
> > bindings
> >
> > Hi All,
> >
> > On 2018-03-06 08:59, Geert Uytterhoeven wrote:
> > > Hi Rob, Jolly,
> > >
> > > On Mon, Mar 5, 2018 at 11:39 PM, Rob Herring <robh@kernel.org> wrote:
> > >> On Tue, Feb 27, 2018 at 03:55:49PM -0800, Jolly Shah wrote:
> > >>> Add documentation to describe ZynqMP power domain bindings.
> > >>>
> > >>> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > >>> Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> > >>> ---
> > >>> .../devicetree/bindings/power/zynqmp-genpd.txt | 46
> > ++++++++++++++++++++++
> > >>> 1 file changed, 46 insertions(+)
> > >>> create mode 100644
> > >>> Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> > >>>
> > >>> diff --git
> > >>> a/Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> > >>> b/Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> > >>> new file mode 100644
> > >>> index 0000000..25f9711
> > >>> --- /dev/null
> > >>> +++ b/Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> > >>> +This node contains a number of subnodes, each representing a
> > >>> +single PM domain that PM domain consumer devices reference.
> > >>> +
> > >>> +== PM Domain Nodes ==
> > >>> +
> > >>> +Required properties:
> > >>> + - #power-domain-cells: Number of cells in a PM domain specifier.
> > >>> +Must be
> > 0.
> > >>> + - pd-id: List of domain identifiers of as defined by platform firmware.
> > These
> > >>> + identifiers are passed to the PM firmware.
> > >>> +
> > >>> +Example:
> > >>> + zynqmp-genpd {
> > >>> + compatible = "xlnx,zynqmp-genpd";
> > >> What's the control interface for controlling the domains?
> > >>> +
> > >>> + pd_usb0: pd-usb0 {
> > >>> + pd-id = <22>;
> > >>> + #power-domain-cells = <0>;
> > >> There's no need for all these sub nodes. Make #power-domain-cells 1
> > >> and put the id in the cell value.
> > > That was my first reaction, too...
> > >>> + };
> > >>> +
> > >>> + pd_sata: pd-sata {
> > >>> + pd-id = <28>;
> > >>> + #power-domain-cells = <0>;
> > >>> + };
> > >>> +
> > >>> + pd_gpu: pd-gpu {
> > >>> + pd-id = <58 20 21>;
> > > ... until I saw the above.
> > > Controlling the GPU power area requires controlling 3 physical areas?
> > >
> > > However, doing it this way may bite you in the future, if a need
> > > arises to control a subset. And what about power up/down order?
> >
> > What about defining 3 separate domains and arranging them in
> > parent-child relationship? generic power domains already supports that
> > and this allows to nicely define the power on/off order.
> >
> > >>> + #power-domain-cells = <0x0>;
> > >>> + };
> > >>> + };
> >
>
> I agree it should be arranged in as parent child order to control subset or control
> order. Will incorporate those changes in next version.
>
> > Best regards
> > --
> > Marek Szyprowski, PhD
> > Samsung R&D Institute Poland


As suggested, I tried out parent, child approach. However what I found is Genpd core takes care of parent child dependencies for power on off routines only. In our case, We need them in attach-detach routines too. In that case, we need to handle dependencies manually for those routines. Please suggest better approach, if any.

Thanks,
Jolly Shah
\
 
 \ /
  Last update: 2018-05-17 23:11    [W:0.481 / U:1.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site