lkml.org 
[lkml]   [2018]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 3/5] arm64: dts: rockchip: Add gpio-syscon10 to rk3328
From
Date


On 2018-05-11 8:22 PM, Rob Herring wrote:
> On Thu, May 10, 2018 at 4:16 AM, <djw@t-chip.com.cn> wrote:
>> From: Levin Du <djw@t-chip.com.cn>
>>
>> Adding a new gpio controller named "gpio-syscon10" to rk3328, providing
>> access to the pins defined in the syscon GRF_SOC_CON10.
>>
>> Boards using these special pins to control regulators or LEDs, can now
>> utilize existing drivers like gpio-regulator and leds-gpio.
>>
>> Signed-off-by: Levin Du <djw@t-chip.com.cn>
>>
>> ---
>>
>> Changes in v1:
>> - Split from V0 and add to rk3328.dtsi for general use.
>>
>> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> index b8e9da1..73a822d 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> @@ -309,6 +309,12 @@
>> mode-loader = <BOOT_BL_DOWNLOAD>;
>> };
>>
>> + gpio_syscon10: gpio-syscon10 {
> GPIO controller nodes should be named just 'gpio'.

'gpio' is a general name, and there're already gpio0~gpio3 for pinctrl
GPIOs.

>> + compatible = "rockchip,gpio-syscon";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio,syscon-dev = <0 0x0428 0>;
> This property is not documented and takes a phandle.
See PATCH1 which allows fetching syscon from parent node .
This is also documented in
Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
in PATCH2.

Thanks
Levin

\
 
 \ /
  Last update: 2018-05-14 03:23    [W:0.065 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site