lkml.org 
[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
From
Date
Dear Doug,


在 2018年05月11日 04:59, Doug Anderson 写道:
> Hi,
>
> On Wed, May 9, 2018 at 1:55 AM, wlf <wulf@rock-chips.com> wrote:
>>>>>> + } else if (hsotg->params.host_dma) {
>>>>> Are you sure this is "else if"? Can't you have descriptor DMA enabled
>>>>> in the controller and still need to do a normal DMA transfer if you
>>>>> plug in a hub? Seems like this should be just "if".
>>>> Sorry, I don't understand the case "have descriptor DMA enabled in the
>>>> controller and still need to do a normal DMA transfer". But maybe it
>>>> still
>>>> has another problem if just use "if" here, because it will create kmem
>>>> caches for Slave mode which actually doesn't need aligned DMA buf.
>>> So right now your code looks like:
>>>
>>> if (hsotg->params.dma_desc_enable ||
>>> hsotg->params.dma_desc_fs_enable) {
>>> ...
>>> ...
>>> } else if (hsotg->params.host_dma) {
>>> ...
>>> }
>>>
>>>
>>> I've never played much with "descriptor DMA" on dwc2 because every
>>> time I enabled it (last I tried was years ago) a whole bunch of
>>> peripherals stopped working and I didn't dig (I just left it off).
>>> Thus, I'm no expert on descriptor DMA. ...that being said, my
>>> understanding is that if you enable descriptor DMA in the controller
>>> then it will enable a smarter DMA mode for some of the transfers.
>>> IIRC Descriptor DMA mode specifically can't handle splits. Is my
>>> memory correct there? Presumably that means that when you enable
>>> descriptor DMA in the controller the driver will automatically fall
>>> back to normal Address DMA mode if things get too complicated. When
>>> it falls back to Address DMA mode, presumably dwc2_hcd_init() won't
>>> get called again. That means that any data structures that are needed
>>> for Address DMA need to be allocated in dwc2_hcd_init() even if
>>> descriptor DMA is enabled because we might need to fall back to
>>> Address DMA.
>>>
>>> Thus, I'm suggesting changing the code to:
>>>
>>> if (hsotg->params.dma_desc_enable ||
>>> hsotg->params.dma_desc_fs_enable) {
>>> ...
>>> ...
>>> }
>>>
>>> if (hsotg->params.host_dma) {
>>> ...
>>> }
>>>
>>>
>>> ...as I said, I'm no expert and I could just be confused. If
>>> something I say seems wrong please correct me.
>> Ah, I got it. Thanks for your detailed explanation. Although I don't know if
>> it's possible that dwc2 driver automatically fall back to normal Address DMA
>> mode when desc DMA work abnormally with split, I agree with your suggestion.
>> I'll fix it in V4 patch.
> Hmm, I guess you're right. I did a quick search and I can't find any
> evidence of a fallback like this. Maybe I dreamed that. I found some
> old comment in the commit history that said:
I think you're right. I find that it's possible to fall back to Address
DMA mode if desc DMA initialization failure. The error case is:in
dwc2_hcd_init(),  if it fails to create dwc2 generic desc cache or dwc2
hs isoc desc cache, then it will disable desc DMA and fall back to
Address DMA mode.
>
> /*
> * Disable descriptor dma mode by default as the HW can support
> * it, but does not support it for SPLIT transactions.
> * Disable it for FS devices as well.
> */
>
> ...and it looks there's currently nobody using descriptor DMA anyway
> (assuming I read the code correctly). It does seem like people were
> ever going to turn it on then it would have to be dynamic as I was
> dreaming it was...
Yes, the dwc2 desc DMA mode can't support split transaction. So few
people use desc DMA mode for OTG Host mode. BTW, I find that the latest
code enable desc DMA mode by default for the OTG peripheral mode if the
dwc2 hardware support desc DMA.
>


\
 
 \ /
  Last update: 2018-05-11 11:27    [W:0.293 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site