lkml.org 
[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 1/2] documentation: Add nvmem bindings documentation
From
Date



On 24/03/18 17:46, chinnikishore369@gmail.com wrote:
> From: Nava kishore Manne <navam@xilinx.com>
>
> This patch add the bindings document of zynqmp silicon id driver.
>
> Signed-off-by: Nava kishore Manne <navam@xilinx.com>

I see that you have not included DT maintainers in to/cc list, I can not
accept new drivers whose bindings are not Acked/Reviewed by DT maintainers.

Overall the driver looks fine for me.


thanks,
srini


> ---
> .../devicetree/bindings/nvmem/zynqmp_nvmem.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/nvmem/zynqmp_nvmem.txt
>
> diff --git a/Documentation/devicetree/bindings/nvmem/zynqmp_nvmem.txt b/Documentation/devicetree/bindings/nvmem/zynqmp_nvmem.txt
> new file mode 100644
> index 000000000000..94332f160a92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/zynqmp_nvmem.txt
> @@ -0,0 +1,32 @@
> += Zynq UltraScale+ MPSoC nvmem firmware driver binding =
> +
> +Required properties:
> +- compatible: should be "xlnx,zynqmp-nvmem-fw"
> +
> += Data cells =
> +Are child nodes of silicon id, bindings of which as described in
> +bindings/nvmem/nvmem.txt
> +
> +Example:
> +
> + nvmem_firmware {
> + compatible = "xlnx,zynqmp-nvmem-fw";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + /* Data cells */
> + soc_revision: soc_revision@0 {
> + reg = <0x0 0x4>;
> + };
> + };
> +
> += Data consumers =
> +Are device nodes which consume nvmem data cells.
> +
> +For example:
> +
> + pcap {
> + ...
> + nvmem-cells = <&soc_revision>;
> + nvmem-cell-names = "soc_revision";
> + };
>

\
 
 \ /
  Last update: 2018-05-11 10:44    [W:0.033 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site