lkml.org 
[lkml]   [2018]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ASoC: da7219: read fmw property to get mclk for non-dts systems
From
Date


On 5/1/2018 12:35 AM, Adam Thomson wrote:
> On 30 April 2018 10:23, Akshu Agrawal wrote:
>
>> Non-dts based systems can use ACPI DSDT to pass on the mclk
>> to da7219.
>> This enables da7219 mclk to be linked to system clock.
>> Enable/Disable of the mclk is already handled in the codec so
>> platform drivers don't have to explicitly do handling of mclk.
>
> There is already a means via DT to specify the MCLK for a device using the
> generic clock DT bindings, and this driver already uses that. Should ACPI not
> have something similar to that which is generic, rather than adding device
> specific bindings/properties to achieve the same? There will be other drivers
> that will want to do the same.
>

IMO for all non-dts based ACPI systems, DSDT would be the best and
simplest way to link system clock to mclk. Currently, machine audio
drivers handles the clock and this can be avoided by having this property.

>>
>> Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
>> ---
>> v2: Fixed kbuild error
>> include/sound/da7219.h | 2 ++
>> sound/soc/codecs/da7219.c | 7 ++++++-
>> 2 files changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/sound/da7219.h b/include/sound/da7219.h
>> index 1bfcb16..df7ddf4 100644
>> --- a/include/sound/da7219.h
>> +++ b/include/sound/da7219.h
>> @@ -38,6 +38,8 @@ struct da7219_pdata {
>>
>> const char *dai_clks_name;
>>
>> + const char *mclk_name;
>> +
>> /* Mic */
>> enum da7219_micbias_voltage micbias_lvl;
>> enum da7219_mic_amp_in_sel mic_amp_in_sel;
>> diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c
>> index 980a6a8..aed68a4 100644
>> --- a/sound/soc/codecs/da7219.c
>> +++ b/sound/soc/codecs/da7219.c
>> @@ -1624,6 +1624,8 @@ static struct da7219_pdata *da7219_fw_to_pdata(struct
>> snd_soc_component *compone
>> dev_warn(dev, "Using default clk name: %s\n",
>> pdata->dai_clks_name);
>>
>> + device_property_read_string(dev, "dlg,mclk-name", &pdata->mclk_name);
>> +
>> if (device_property_read_u32(dev, "dlg,micbias-lvl", &of_val32) >= 0)
>> pdata->micbias_lvl = da7219_fw_micbias_lvl(dev, of_val32);
>> else
>> @@ -1905,7 +1907,10 @@ static int da7219_probe(struct snd_soc_component
>> *component)
>> da7219_handle_pdata(component);
>>
>> /* Check if MCLK provided */
>> - da7219->mclk = devm_clk_get(component->dev, "mclk");
>> + if (da7219->pdata->mclk_name)
>> + da7219->mclk = clk_get(NULL, da7219->pdata->mclk_name);
>
> By doing this you would need an associated 'clk_put()' whereas the devm call
> avoids this.
>

Agreed, would add a corresponding clk_put call.

Thanks,
Akshu

>> + if (!da7219->mclk)
>> + da7219->mclk = devm_clk_get(component->dev, "mclk");
>> if (IS_ERR(da7219->mclk)) {
>> if (PTR_ERR(da7219->mclk) != -ENOENT) {
>> ret = PTR_ERR(da7219->mclk);
>> --
>> 1.9.1

\
 
 \ /
  Last update: 2018-05-01 16:42    [W:1.508 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site