[lkml]   [2018]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: simultaneous voice/data works (was Re: call/normal switch was Re: omap4-droid4: voice call support was)
On Mon 2018-04-09 07:08:47, Tony Lindgren wrote:
> * Dan Williams <> [180408 02:46]:
> > On Sat, 2018-04-07 at 14:22 +0200, Pavel Machek wrote:
> > > I tried --location-enable-gps-unmanaged , but that did not work for
> > > me.
> >
> > That requires a TTY that would spit out the GPS data; in this mode MM
> > only sends the start/stop commands, and what comes out the GPS TTY is
> > undefined (at least by MM).
> >
> > So unless you know that one of the 6600's TTYs does GPS and in what
> > format it does GPS, then no.
> There should be a NMEA port within the unknown port range ttyUSB[123].
> Is there some easy way to enable --location-enable-gps-unmanaged for
> testing so I can check if GPS gets enabled for one of the ports?

In the meantime, I got GPS to work :-).

I modified qmicli to pipe NMEA data to stdout, which should be enough.

But yes, directly exposing NMEA data on ttyGSM? would be even nicer.


(cesky, pictures)
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2018-04-09 22:21    [W:0.129 / U:6.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site