Messages in this thread |  | | Subject | Re: [PATCH v3 1/2] phy: Add QMP phy based UFS phy support for sdm845 | From | Vivek Gautam <> | Date | Mon, 9 Apr 2018 16:58:48 +0530 |
| |
Hi Can,
On 3/27/2018 12:48 PM, Can Guo wrote: > Add UFS PHY support to make SDM845 UFS work with common PHY framework. > > Signed-off-by: Can Guo <cang@codeaurora.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp.c | 130 +++++++++++++++++++++++++++++++++--- > drivers/phy/qualcomm/phy-qcom-qmp.h | 8 +++ > 2 files changed, 127 insertions(+), 11 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c > index 5cf2c3c..0b58030 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c > @@ -156,6 +156,11 @@ enum qphy_reg_layout { > [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, > }; > > +static const unsigned int sdm845_ufsphy_regs_layout[] = { > + [QPHY_START_CTRL] = 0x00, > + [QPHY_PCS_READY_STATUS] = 0x168, > +}; > + > static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { > QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), > QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), > @@ -601,6 +606,73 @@ enum qphy_reg_layout { > QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60), > }; > > +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = { > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32), > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f), > + > + /* Rate B */ > + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44), > +}; > + > +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = { > + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06), > +}; > + > +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81), > + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80), > +}; > + > +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = { > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02), > +}; > > /* struct qmp_phy_cfg - per-PHY initialization config */ > struct qmp_phy_cfg { > @@ -652,6 +724,9 @@ struct qmp_phy_cfg { > /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ > unsigned int tx_b_lane_offset; > unsigned int rx_b_lane_offset; > + > + /* true, if PCS block has no separate SW_RESET register */ > + bool skip_sw_rst; > }; > > /** > @@ -748,6 +823,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > "aux", "cfg_ahb", "ref", "com_aux", > }; > > +static const char * const sdm845_ufs_phy_clk_l[] = { > + "ref",
did you miss adding 'ref_aux' clock here as in the v2 version? Rest looks good. After this change, you can add my reviewed-by Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Thanks Vivek > +}; > + > /* list of resets */ > static const char * const msm8996_pciephy_reset_l[] = { > "phy", "common", "cfg", > @@ -758,7 +837,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > }; > > /* list of regulators */ > -static const char * const msm8996_phy_vreg_l[] = { > +static const char * const qmp_phy_vreg_l[] = { > "vdda-phy", "vdda-pll", > }; > > @@ -778,8 +857,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), > .reset_list = msm8996_pciephy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l), > - .vreg_list = msm8996_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > .regs = pciephy_regs_layout, > > .start_ctrl = PCS_START | PLL_READY_GATE_EN, > @@ -809,8 +888,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = msm8996_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > .regs = usb3phy_regs_layout, > > .start_ctrl = SERDES_START | PCS_START, > @@ -870,8 +949,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = msm8996_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > .regs = qmp_v3_usb3phy_regs_layout, > > .start_ctrl = SERDES_START | PCS_START, > @@ -903,8 +982,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = msm8996_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > .regs = qmp_v3_usb3phy_regs_layout, > > .start_ctrl = SERDES_START | PCS_START, > @@ -916,6 +995,30 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) > .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, > }; > > +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { > + .type = PHY_TYPE_UFS, > + .nlanes = 2, > + > + .serdes_tbl = sdm845_ufsphy_serdes_tbl, > + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl), > + .tx_tbl = sdm845_ufsphy_tx_tbl, > + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl), > + .rx_tbl = sdm845_ufsphy_rx_tbl, > + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl), > + .pcs_tbl = sdm845_ufsphy_pcs_tbl, > + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl), > + .clk_list = sdm845_ufs_phy_clk_l, > + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = sdm845_ufsphy_regs_layout, > + > + .start_ctrl = SERDES_START, > + .pwrdn_ctrl = SW_PWRDN, > + .mask_pcs_ready = PCS_READY, > + .skip_sw_rst = true, > +}; > + > static void qcom_qmp_phy_configure(void __iomem *base, > const unsigned int *regs, > const struct qmp_phy_init_tbl tbl[], > @@ -1140,7 +1243,8 @@ static int qcom_qmp_phy_init(struct phy *phy) > usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); > > /* Pull PHY out of reset state */ > - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); > + if (!cfg->skip_sw_rst) > + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); > if (cfg->has_phy_dp_com_ctrl) > qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); > > @@ -1178,7 +1282,8 @@ static int qcom_qmp_phy_exit(struct phy *phy) > clk_disable_unprepare(qphy->pipe_clk); > > /* PHY reset */ > - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); > + if (!cfg->skip_sw_rst) > + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); > > /* stop SerDes and Phy-Coding-Sublayer */ > qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); > @@ -1531,6 +1636,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) > }, { > .compatible = "qcom,sdm845-qmp-usb3-uni-phy", > .data = &qmp_v3_usb3_uniphy_cfg, > + }, { > + .compatible = "qcom,sdm845-qmp-ufs-phy", > + .data = &sdm845_ufsphy_cfg, > }, > { }, > }; > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h > index 5d78d43..3cbcfe1 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp.h > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h > @@ -184,6 +184,8 @@ > #define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8 > #define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc > #define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100 > +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104 > +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108 > #define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c > #define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120 > #define QSERDES_V3_COM_CLK_SELECT 0x138 > @@ -211,8 +213,13 @@ > /* Only for QMP V3 PHY - RX registers */ > #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c > #define QSERDES_V3_RX_UCDR_SO_GAIN 0x014 > +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024 > +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028 > +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c > #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 > #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 > +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c > +#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044 > #define QSERDES_V3_RX_RX_TERM_BW 0x07c > #define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc > #define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 > @@ -275,6 +282,7 @@ > #define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc > #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0 > #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4 > +#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4 > #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 > #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c > #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
|  |