lkml.org 
[lkml]   [2018]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] drm: clarify adjusted_mode for a bridge connected to a crtc
On Fri, Apr 06, 2018 at 03:28:27PM +0000, Philippe CORNU wrote:
> Hi Laurent,
>
> On 04/06/2018 04:53 PM, Laurent Pinchart wrote:
> > Hi Philippe,
> >
> > Thank you for the patch.
> >
> > On Monday, 26 February 2018 14:16:04 EEST Philippe Cornu wrote:
> >> This patch clarifies the adjusted_mode documentation
> >> for a bridge directly connected to a crtc.
> >>
> >> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> >> ---
> >> This patch is linked to the discussion https://lkml.org/lkml/2018/1/25/367
> >>
> >> include/drm/drm_bridge.h | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> >> index 3270fec46979..b5f3c070467c 100644
> >> --- a/include/drm/drm_bridge.h
> >> +++ b/include/drm/drm_bridge.h
> >> @@ -177,7 +177,8 @@ struct drm_bridge_funcs {
> >> * pipeline has been called already. If the bridge is the first element
> >> * then this would be &drm_encoder_helper_funcs.mode_set. The display
> >> * pipe (i.e. clocks and timing signals) is off when this function is
> >> - * called.
> >> + * called. If the bridge is connected to the crtc, the adjusted_mode
> >> + * parameter is the one defined in &drm_crtc_state.adjusted_mode.
> >
> > Unless I'm mistaken this will always be the mode stored in
> > &drm_crtc_state.adjusted_mode (at least for atomic drivers), regardless of
> > whether the bridge is the first in the chain (connected to the CRTC) or not.
> > What is important to document is that we have a single adjusted_mode for the
> > whole chain of bridges, and that it corresponds to the mode output by the CRTC
> > for the first bridge. Bridges further in the chain can look at that mode,
> > although there will probably be nothing of interest to them there.
> >
> > How about the following text ?
> >
> > /**
> > * @mode_set:
> > *
> > * This callback should set the given mode on the bridge. It is called
> > * after the @mode_set callback for the preceding element in the display
> > * pipeline has been called already. If the bridge is the first element
> > * then this would be &drm_encoder_helper_funcs.mode_set. The display
> > * pipe (i.e. clocks and timing signals) is off when this function is
> > * called.
> > *
> > * The adjusted_mode parameter corresponds to the mode output by the CRTC
> > * for the first bridge in the chain. It can be different from the mode
> > * parameter that contains the desired mode for the connector at the end
> > * of the bridges chain, for instance when the first bridge in the chain
> > * performs scaling. The adjusted mode is mostly useful for the first
> > * bridge in the chain and is likely irrelevant for the other bridges.
> > *
> > * For atomic drivers the adjusted_mode is the mode stored in
> > * &drm_crtc_state.adjusted_mode.
> > *
> > * NOTE:
> > *
> > * If a need arises to store and access modes adjusted for other locations
> > * than the connection between the CRTC and the first bridge, the DRM
> > * framework will have to be extended with DRM bridge states.
> > */
> >
> > Then I think we should also update the documentation of
> > drm_crtc_state.adjusted_mode accordingly:
> >
> > /*
> > * @adjusted_mode:
> > *
> > * Internal display timings which can be used by the driver to handle
> > * differences between the mode requested by userspace in @mode and what
> > * is actually programmed into the hardware.
> > *
> > * For drivers using drm_bridge, this store the hardware display timings
> > * used between the CRTC and the first bridge. For other drivers, the
> > * meaning of the adjusted_mode field is purely driver implementation
> > * defined information, and will usually be used to store the hardware
> > * display timings used between the CRTC and encoder blocks.
> > */
> >
>
> Your proposal is very clear and understandable. I will make a new patch
> version based on it.

Just to avoid confusion: Needs to be a fully new patch on top of latest
drm-misc-next, since no rebasing in a group maintained tree.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2018-04-09 09:57    [W:0.073 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site