lkml.org 
[lkml]   [2018]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 4/4] mm/sparse: Optimize memmap allocation during sparse_init()
On 04/08/18 at 04:20pm, Baoquan He wrote:
> On 04/06/18 at 07:50am, Dave Hansen wrote:
> > I'm having a really hard time tying all the pieces back together. Let
> > me give it a shot and you can tell me where I go wrong.
> >
> > On 02/27/2018 07:26 PM, Baoquan He wrote:
> > > In sparse_init(), two temporary pointer arrays, usemap_map and map_map
> > > are allocated with the size of NR_MEM_SECTIONS.
> >
> > In sparse_init(), two temporary pointer arrays, usemap_map and map_map
> > are allocated to hold the maps for every possible memory section
> > (NR_MEM_SECTIONS). However, we obviously only need the array sized for
> > nr_present_sections (introduced in patch 1).
>
> Yes, correct.
>
> >
> > The reason this is a problem is that, with 5-level paging,
> > NR_MEM_SECTIONS (8M->512M) went up dramatically and these temporary
> > arrays can eat all of memory, like on kdump kernels.
>
> With 5-level paging enabled, MAX_PHYSMEM_BITS changed from 46 to
> 52. You can see NR_MEM_SECTIONS becomes 64 times of the old value. So
> the two temporary pointer arrays eat more memory, 8M -> 8M*64 = 512M.
>
> # define MAX_PHYSMEM_BITS (pgtable_l5_enabled ? 52 : 46)
>
> >
> > This patch does two things: it makes sure to give usemap_map/mem_map a
> > less gluttonous size on small systems, and it changes the map allocation
> > and handling to handle the now more compact, less sparse arrays.
>
> Yes, because 99.9% of systems do not have PB level of memory, not even TB.
> Any place of memory allocatin with the size of NR_MEM_SECTIONS should be
> avoided.
>
> >
> > ---
> >
> > The code looks fine to me. It's a bit of a shame that there's no
> > verification to ensure that idx_present never goes beyond the shiny new
> > nr_present_sections.
>
> This is a good point. Do you think it's OK to replace (section_nr <
> NR_MEM_SECTIONS) with (section_nr < nr_present_sections) in below
> for_each macro? This for_each_present_section_nr() is only used
> during sparse_init() execution.

Oops, I was wrong. Here nr_present_sections is the number of present
sections, while section_nr is index of all sections. If decide to do,
can add check like below?

if (idx_present >= nr_present_sections) {
pr_err("idx_present goes beyond nr_present_sections, xxxx \n");
break;
}

>
> #define for_each_present_section_nr(start, section_nr) \
> for (section_nr = next_present_section_nr(start-1); \
> ((section_nr >= 0) && \
> (section_nr < NR_MEM_SECTIONS) && \
> (section_nr <= __highest_present_section_nr)); \
> section_nr = next_present_section_nr(section_nr))
>
> >
> >
> > > @@ -583,6 +592,7 @@ void __init sparse_init(void)
> > > unsigned long *usemap;
> > > unsigned long **usemap_map;
> > > int size;
> > > + int idx_present = 0;
> >
> > I wonder whether idx_present is a good name. Isn't it the number of
> > consumed mem_map[]s or usemaps?
>
> Yeah, in sparse_init(), it's the index of present memory sections, and
> also the number of consumed mem_map[]s or usemaps. And I remember you
> suggested nr_consumed_maps instead. seems nr_consumed_maps is a little
> long to index array to make code line longer than 80 chars. How about
> name it idx_present in sparse_init(), nr_consumed_maps in
> alloc_usemap_and_memmap(), the maps allocation function? I am also fine
> to use nr_consumed_maps for all of them.
>
> >
> > >
> > > if (!map) {
> > > ms->section_mem_map = 0;
> > > + idx_present++;
> > > continue;
> > > }
> > >
> >
> >
> > This hunk seems logically odd to me. I would expect a non-used section
> > to *not* consume an entry from the temporary array. Why does it? The
> > error and success paths seem to do the same thing.
>
> Yes, this place is the hardest to understand. The temorary arrays are
> allocated beforehand with the size of 'nr_present_sections'. The error
> paths you mentioned is caused by allocation failure of mem_map or
> map_map, but whatever it's error or success paths, the sections must be
> marked as present in memory_present(). Error or success paths happened
> in alloc_usemap_and_memmap(), while checking if it's erorr or success
> paths happened in the last for_each_present_section_nr() of
> sparse_init(), and clear the ms->section_mem_map if it goes along error
> paths. This is the key point of this new allocation way.
>
> Thanks
> Baoquan

\
 
 \ /
  Last update: 2018-04-09 04:09    [W:2.455 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site