lkml.org 
[lkml]   [2018]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: fsl_ssi: Fix mode setting when changing channel number
Date
This is a partial revert (in a cleaner way) of commit ebf08ae3bc90
("ASoC: fsl_ssi: Keep ssi->i2s_net updated") to fix a regression
at test cases when switching between mono and stereo audio.

The problem is that ssi->i2s_net is initialized in set_dai_fmt()
only, while this set_dai_fmt() is only called during the dai-link
probe(). The original patch assumed set_dai_fmt() would be called
during every playback instance, so it failed at the overriding use
cases.

This patch adds the local variable i2s_net back to let regular use
cases still follow the mode settings from the set_dai_fmt().

Meanwhile, the original commit of keeping ssi->i2s_net updated was
to make set_tdm_slot() clean by checking the ssi->i2s_net directly
instead of reading SCR register. However, the change itself is not
necessary (or even harmful) because the set_tdm_slot() might fail
to check the slot number for Normal-Mode-None-Net settings while
mono audio cases still need 2 slots. So this patch can also fix it.
And it adds an extra line of comments to declare ssi->i2s_net does
not reflect the register value but merely the initial setting from
the set_dai_fmt().

Reported-by: Mika Penttilä <mika.penttila@nextfour.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
---
sound/soc/fsl/fsl_ssi.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 0823b08..89df2d9 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -217,6 +217,7 @@ struct fsl_ssi_soc_data {
* @dai_fmt: DAI configuration this device is currently used with
* @streams: Mask of current active streams: BIT(TX) and BIT(RX)
* @i2s_net: I2S and Network mode configurations of SCR register
+ * (this is the initial settings based on the DAI format)
* @synchronous: Use synchronous mode - both of TX and RX use STCK and SFCK
* @use_dma: DMA is used or FIQ with stream filter
* @use_dual_fifo: DMA with support for dual FIFO mode
@@ -829,16 +830,23 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
}

if (!fsl_ssi_is_ac97(ssi)) {
+ /*
+ * Keep the ssi->i2s_net intact while having a local variable
+ * to override settings for special use cases. Otherwise, the
+ * ssi->i2s_net will lose the settings for regular use cases.
+ */
+ u8 i2s_net = ssi->i2s_net;
+
/* Normal + Network mode to send 16-bit data in 32-bit frames */
if (fsl_ssi_is_i2s_cbm_cfs(ssi) && sample_size == 16)
- ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET;
+ i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET;

/* Use Normal mode to send mono data at 1st slot of 2 slots */
if (channels == 1)
- ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL;
+ i2s_net = SSI_SCR_I2S_MODE_NORMAL;

regmap_update_bits(regs, REG_SSI_SCR,
- SSI_SCR_I2S_NET_MASK, ssi->i2s_net);
+ SSI_SCR_I2S_NET_MASK, i2s_net);
}

/* In synchronous mode, the SSI uses STCCR for capture */
--
2.7.4
\
 
 \ /
  Last update: 2018-04-08 06:42    [W:0.462 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site