lkml.org 
[lkml]   [2018]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] can: ti_hecc: fix close when napi poll is active
Date
When closing this CAN interface while napi poll is active, for example with:
`ip link set can0 down` several interfaces freeze. This seemed to be caused
by napi_disable called from ti_hecc_close expecting the scheduled probe to
either return quota or call napi_complete. Since the poll functions has a
check for netif_running it returns 0 and doesn't call napi_complete and hence
violates the napi its expectation.

So remove this check, so either napi_complete is called or quota is returned.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
---
drivers/net/can/ti_hecc.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index db6ea93..42813d3 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -603,9 +603,6 @@ static int ti_hecc_rx_poll(struct napi_struct *napi, int quota)
u32 mbx_mask;
unsigned long pending_pkts, flags;

- if (!netif_running(ndev))
- return 0;
-
while ((pending_pkts = hecc_read(priv, HECC_CANRMP)) &&
num_pkts < quota) {
mbx_mask = BIT(priv->rx_next); /* next rx mailbox to process */
--
2.7.4
\
 
 \ /
  Last update: 2018-04-07 22:22    [W:0.036 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site