lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] powerpc: Remove core support for Marvell mv64x60 hostbridges
Date
There are no longer any platforms that use Marvell's mv64x60
hostbridges so remove the supporting kernel code.

CC: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
---
Documentation/devicetree/bindings/marvell.txt | 516 -------------------------
arch/powerpc/sysdev/Makefile | 3 -
arch/powerpc/sysdev/mv64x60.h | 13 -
arch/powerpc/sysdev/mv64x60_dev.c | 535 --------------------------
arch/powerpc/sysdev/mv64x60_pci.c | 171 --------
arch/powerpc/sysdev/mv64x60_pic.c | 297 --------------
arch/powerpc/sysdev/mv64x60_udbg.c | 152 --------
7 files changed, 1687 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/marvell.txt
delete mode 100644 arch/powerpc/sysdev/mv64x60.h
delete mode 100644 arch/powerpc/sysdev/mv64x60_dev.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_pci.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_pic.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_udbg.c

diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt
deleted file mode 100644
index 7f722316458a..000000000000
--- a/Documentation/devicetree/bindings/marvell.txt
+++ /dev/null
@@ -1,516 +0,0 @@
-Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system. In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains. Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
- This node is used to represent the system-controller and must be
- present when the system uses a system controller chip. The top-level
- system-controller node contains information that is global to all
- devices within the system controller chip. The node name begins
- with "system-controller" followed by the unit address, which is
- the base address of the memory-mapped register set for the system
- controller chip.
-
- Required properties:
-
- - ranges : Describes the translation of system controller addresses
- for memory mapped registers.
- - clock-frequency: Contains the main clock frequency for the system
- controller chip.
- - reg : This property defines the address and size of the
- memory-mapped registers contained within the system controller
- chip. The address specified in the "reg" property should match
- the unit address of the system-controller node.
- - #address-cells : Address representation for system controller
- devices. This field represents the number of cells needed to
- represent the address of the memory-mapped registers of devices
- within the system controller chip.
- - #size-cells : Size representation for the memory-mapped
- registers within the system controller chip.
- - #interrupt-cells : Defines the width of cells used to represent
- interrupts.
-
- Optional properties:
-
- - model : The specific model of the system controller chip. Such
- as, "mv64360", "mv64460", or "mv64560".
- - compatible : A string identifying the compatibility identifiers
- of the system controller chip.
-
- The system-controller node contains child nodes for each system
- controller device that the platform uses. Nodes should not be created
- for devices which exist on the system controller chip but are not used
-
- Example Marvell Discovery mv64360 system-controller node:
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- [ child node definitions... ]
- }
-
-2) Child nodes of /system-controller
-
- a) Marvell Discovery MDIO bus
-
- The MDIO is a bus to which the PHY devices are connected. For each
- device that exists on this bus, a child node should be created. See
- the definition of the PHY node below for an example of how to define
- a PHY.
-
- Required properties:
- - #address-cells : Should be <1>
- - #size-cells : Should be <0>
- - compatible : Should be "marvell,mv64360-mdio"
-
- Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
-
- ethernet-phy@0 {
- ......
- };
- };
-
-
- b) Marvell Discovery ethernet controller
-
- The Discover ethernet controller is described with two levels
- of nodes. The first level describes an ethernet silicon block
- and the second level describes up to 3 ethernet nodes within
- that block. The reason for the multiple levels is that the
- registers for the node are interleaved within a single set
- of registers. The "ethernet-block" level describes the
- shared register set, and the "ethernet" nodes describe ethernet
- port-specific properties.
-
- Ethernet block node
-
- Required properties:
- - #address-cells : <1>
- - #size-cells : <0>
- - compatible : "marvell,mv64360-eth-block"
- - reg : Offset and length of the register set for this block
-
- Optional properties:
- - clocks : Phandle to the clock control device and gate bit
-
- Example Discovery Ethernet block node:
- ethernet-block@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-block";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- .......
- };
- };
-
- Ethernet port node
-
- Required properties:
- - compatible : Should be "marvell,mv64360-eth".
- - reg : Should be <0>, <1>, or <2>, according to which registers
- within the silicon block the device uses.
- - interrupts : <a> where a is the interrupt number for the port.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
- - phy : the phandle for the PHY connected to this ethernet
- controller.
- - local-mac-address : 6 bytes, MAC address
-
- Example Discovery Ethernet port node:
- ethernet@0 {
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
-
-
- c) Marvell Discovery PHY nodes
-
- Required properties:
- - interrupts : <a> where a is the interrupt number for this phy.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
-
- Example Discovery PHY node:
- ethernet-phy@1 {
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
-
-
- d) Marvell Discovery SDMA nodes
-
- Represent DMA hardware associated with the MPSC (multiprotocol
- serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-sdma"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the DMA
- device.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SDMA node:
- sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
-
- e) Marvell Discovery BRG nodes
-
- Represent baud rate generator hardware associated with the MPSC
- (multiprotocol serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-brg"
- - reg : Offset and length of the register set for this device
- - clock-src : A value from 0 to 15 which selects the clock
- source for the baud rate generator. This value corresponds
- to the CLKS value in the BRGx configuration register. See
- the mv64x60 User's Manual.
- - clock-frequence : The frequency (in Hz) of the baud rate
- generator's input clock.
- - current-speed : The current speed setting (presumably by
- firmware) of the baud rate generator.
-
- Example Discovery BRG node:
- brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
-
- f) Marvell Discovery CUNIT nodes
-
- Represent the Serial Communications Unit device hardware.
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
-
- g) Marvell Discovery MPSCROUTING nodes
-
- Represent the Discovery's MPSC routing hardware
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- mpscrouting@b500 {
- reg = <0xb400 0xc>;
- };
-
-
- h) Marvell Discovery MPSCINTR nodes
-
- Represent the Discovery's MPSC DMA interrupt hardware registers
- (SDMA cause and mask registers).
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPSCINTR node:
- mpsintr@b800 {
- reg = <0xb800 0x100>;
- };
-
-
- i) Marvell Discovery MPSC nodes
-
- Represent the Discovery's MPSC (Multiprotocol Serial Controller)
- serial port.
-
- Required properties:
- - compatible : "marvell,mv64360-mpsc"
- - reg : Offset and length of the register set for this device
- - sdma : the phandle for the SDMA node used by this port
- - brg : the phandle for the BRG node used by this port
- - cunit : the phandle for the CUNIT node used by this port
- - mpscrouting : the phandle for the MPSCROUTING node used by this port
- - mpscintr : the phandle for the MPSCINTR node used by this port
- - cell-index : the hardware index of this cell in the MPSC core
- - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
- register
- - interrupts : <a> where a is the interrupt number for the MPSC.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery MPSCINTR node:
- mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- max_idle = <40>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
-
- j) Marvell Discovery Watch Dog Timer nodes
-
- Represent the Discovery's watchdog timer hardware
-
- Required properties:
- - compatible : "marvell,mv64360-wdt"
- - reg : Offset and length of the register set for this device
-
- Example Discovery Watch Dog Timer node:
- wdt@b410 {
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
-
- k) Marvell Discovery I2C nodes
-
- Represent the Discovery's I2C hardware
-
- Required properties:
- - device_type : "i2c"
- - compatible : "marvell,mv64360-i2c"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the I2C.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery I2C node:
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
-
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
- Represent the Discovery's PIC hardware
-
- Required properties:
- - #interrupt-cells : <1>
- - #address-cells : <0>
- - compatible : "marvell,mv64360-pic"
- - reg : Offset and length of the register set for this device
- - interrupt-controller
-
- Example Discovery PIC node:
- pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
-
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
- Represent the Discovery's MPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-mpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPP node:
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
-
- n) Marvell Discovery GPP (General Purpose Pins) nodes
-
- Represent the Discovery's GPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-gpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery GPP node:
- gpp@f000 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
-
- o) Marvell Discovery PCI host bridge node
-
- Represents the Discovery's PCI host bridge device. The properties
- for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
- 1275-1994. A typical value for the compatible property is
- "marvell,mv64360-pci".
-
- Example Discovery PCI host bridge node
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
-
- p) Marvell Discovery CPU Error nodes
-
- Represent the Discovery's CPU error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-cpu-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery CPU Error node:
- cpu-error@70 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
-
- q) Marvell Discovery SRAM Controller nodes
-
- Represent the Discovery's SRAM controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-sram-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SRAM Controller node:
- sram-ctrl@380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
-
- r) Marvell Discovery PCI Error Handler nodes
-
- Represent the Discovery's PCI error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-pci-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery PCI Error Handler node:
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
-
- s) Marvell Discovery Memory Controller nodes
-
- Represent the Discovery's memory controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-mem-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery Memory Controller node:
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
-
-
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9861407d644a..ea2f595b5133 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -28,9 +28,6 @@ obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
-mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
-obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
- mv64x60_udbg.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o

obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h
deleted file mode 100644
index 60cfcb90d1fa..000000000000
--- a/arch/powerpc/sysdev/mv64x60.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MV64X60_H__
-#define __MV64X60_H__
-
-#include <linux/init.h>
-
-extern void __init mv64x60_init_irq(void);
-extern unsigned int mv64x60_get_irq(void);
-
-extern void __init mv64x60_pci_init(void);
-extern void __init mv64x60_init_early(void);
-
-#endif /* __MV64X60_H__ */
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
deleted file mode 100644
index 185a67e742a6..000000000000
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
- * Platform device setup for Marvell mv64360/mv64460 host bridges (Discovery)
- *
- * Author: Dale Farnsworth <dale@farnsworth.org>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <linux/of_platform.h>
-#include <linux/of_net.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/prom.h>
-
-/* These functions provide the necessary setup for the mv64x60 drivers. */
-
-static const struct of_device_id of_mv64x60_devices[] __initconst = {
- { .compatible = "marvell,mv64306-devctrl", },
- {}
-};
-
-/*
- * Create MPSC platform devices
- */
-static int __init mv64x60_mpsc_register_shared_pdev(struct device_node *np)
-{
- struct platform_device *pdev;
- struct resource r[2];
- struct mpsc_shared_pdata pdata;
- const phandle *ph;
- struct device_node *mpscrouting, *mpscintr;
- int err;
-
- ph = of_get_property(np, "mpscrouting", NULL);
- mpscrouting = of_find_node_by_phandle(*ph);
- if (!mpscrouting)
- return -ENODEV;
-
- err = of_address_to_resource(mpscrouting, 0, &r[0]);
- of_node_put(mpscrouting);
- if (err)
- return err;
-
- ph = of_get_property(np, "mpscintr", NULL);
- mpscintr = of_find_node_by_phandle(*ph);
- if (!mpscintr)
- return -ENODEV;
-
- err = of_address_to_resource(mpscintr, 0, &r[1]);
- of_node_put(mpscintr);
- if (err)
- return err;
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdev = platform_device_alloc(MPSC_SHARED_NAME, 0);
- if (!pdev)
- return -ENOMEM;
-
- err = platform_device_add_resources(pdev, r, 2);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-
-static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
-{
- struct resource r[5];
- struct mpsc_pdata pdata;
- struct platform_device *pdev;
- const unsigned int *prop;
- const phandle *ph;
- struct device_node *sdma, *brg;
- int err;
- int port_number;
-
- /* only register the shared platform device the first time through */
- if (id == 0 && (err = mv64x60_mpsc_register_shared_pdev(np)))
- return err;
-
- memset(r, 0, sizeof(r));
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- return err;
-
- of_irq_to_resource(np, 0, &r[4]);
-
- ph = of_get_property(np, "sdma", NULL);
- sdma = of_find_node_by_phandle(*ph);
- if (!sdma)
- return -ENODEV;
-
- of_irq_to_resource(sdma, 0, &r[3]);
- err = of_address_to_resource(sdma, 0, &r[1]);
- of_node_put(sdma);
- if (err)
- return err;
-
- ph = of_get_property(np, "brg", NULL);
- brg = of_find_node_by_phandle(*ph);
- if (!brg)
- return -ENODEV;
-
- err = of_address_to_resource(brg, 0, &r[2]);
- of_node_put(brg);
- if (err)
- return err;
-
- prop = of_get_property(np, "cell-index", NULL);
- if (!prop)
- return -ENODEV;
- port_number = *(int *)prop;
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.cache_mgmt = 1; /* All current revs need this set */
-
- pdata.max_idle = 40; /* default */
- prop = of_get_property(np, "max_idle", NULL);
- if (prop)
- pdata.max_idle = *prop;
-
- prop = of_get_property(brg, "current-speed", NULL);
- if (prop)
- pdata.default_baud = *prop;
-
- /* Default is 8 bits, no parity, no flow control */
- pdata.default_bits = 8;
- pdata.default_parity = 'n';
- pdata.default_flow = 'n';
-
- prop = of_get_property(np, "chr_1", NULL);
- if (prop)
- pdata.chr_1_val = *prop;
-
- prop = of_get_property(np, "chr_2", NULL);
- if (prop)
- pdata.chr_2_val = *prop;
-
- prop = of_get_property(np, "chr_10", NULL);
- if (prop)
- pdata.chr_10_val = *prop;
-
- prop = of_get_property(np, "mpcr", NULL);
- if (prop)
- pdata.mpcr_val = *prop;
-
- prop = of_get_property(brg, "bcr", NULL);
- if (prop)
- pdata.bcr_val = *prop;
-
- pdata.brg_can_tune = 1; /* All current revs need this set */
-
- prop = of_get_property(brg, "clock-src", NULL);
- if (prop)
- pdata.brg_clk_src = *prop;
-
- prop = of_get_property(brg, "clock-frequency", NULL);
- if (prop)
- pdata.brg_clk_freq = *prop;
-
- pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number);
- if (!pdev)
- return -ENOMEM;
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
- err = platform_device_add_resources(pdev, r, 5);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-/*
- * Create mv64x60_eth platform devices
- */
-static struct platform_device * __init mv64x60_eth_register_shared_pdev(
- struct device_node *np, int id)
-{
- struct platform_device *pdev;
- struct resource r[2];
- int err;
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- return ERR_PTR(err);
-
- /* register an orion mdio bus driver */
- r[1].start = r[0].start + 0x4;
- r[1].end = r[0].start + 0x84 - 1;
- r[1].flags = IORESOURCE_MEM;
-
- if (id == 0) {
- pdev = platform_device_register_simple("orion-mdio", -1, &r[1], 1);
- if (IS_ERR(pdev))
- return pdev;
- }
-
- pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
- &r[0], 1);
-
- return pdev;
-}
-
-static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
- struct platform_device *shared_pdev)
-{
- struct resource r[1];
- struct mv643xx_eth_platform_data pdata;
- struct platform_device *pdev;
- struct device_node *phy;
- const u8 *mac_addr;
- const int *prop;
- const phandle *ph;
- int err;
-
- memset(r, 0, sizeof(r));
- of_irq_to_resource(np, 0, &r[0]);
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.shared = shared_pdev;
-
- prop = of_get_property(np, "reg", NULL);
- if (!prop)
- return -ENODEV;
- pdata.port_number = *prop;
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(pdata.mac_addr, mac_addr, 6);
-
- prop = of_get_property(np, "speed", NULL);
- if (prop)
- pdata.speed = *prop;
-
- prop = of_get_property(np, "tx_queue_size", NULL);
- if (prop)
- pdata.tx_queue_size = *prop;
-
- prop = of_get_property(np, "rx_queue_size", NULL);
- if (prop)
- pdata.rx_queue_size = *prop;
-
- prop = of_get_property(np, "tx_sram_addr", NULL);
- if (prop)
- pdata.tx_sram_addr = *prop;
-
- prop = of_get_property(np, "tx_sram_size", NULL);
- if (prop)
- pdata.tx_sram_size = *prop;
-
- prop = of_get_property(np, "rx_sram_addr", NULL);
- if (prop)
- pdata.rx_sram_addr = *prop;
-
- prop = of_get_property(np, "rx_sram_size", NULL);
- if (prop)
- pdata.rx_sram_size = *prop;
-
- ph = of_get_property(np, "phy", NULL);
- if (!ph)
- return -ENODEV;
-
- phy = of_find_node_by_phandle(*ph);
- if (phy == NULL)
- return -ENODEV;
-
- prop = of_get_property(phy, "reg", NULL);
- if (prop)
- pdata.phy_addr = MV643XX_ETH_PHY_ADDR(*prop);
-
- of_node_put(phy);
-
- pdev = platform_device_alloc(MV643XX_ETH_NAME, id);
- if (!pdev)
- return -ENOMEM;
-
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- err = platform_device_add_resources(pdev, r, 1);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-/*
- * Create mv64x60_i2c platform devices
- */
-static int __init mv64x60_i2c_device_setup(struct device_node *np, int id)
-{
- struct resource r[2];
- struct platform_device *pdev;
- struct mv64xxx_i2c_pdata pdata;
- const unsigned int *prop;
- int err;
-
- memset(r, 0, sizeof(r));
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- return err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.freq_m = 8; /* default */
- prop = of_get_property(np, "freq_m", NULL);
- if (prop)
- pdata.freq_m = *prop;
-
- pdata.freq_n = 3; /* default */
- prop = of_get_property(np, "freq_n", NULL);
- if (prop)
- pdata.freq_n = *prop;
-
- pdata.timeout = 1000; /* default: 1 second */
-
- pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
- if (!pdev)
- return -ENOMEM;
-
- err = platform_device_add_resources(pdev, r, 2);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-/*
- * Create mv64x60_wdt platform devices
- */
-static int __init mv64x60_wdt_device_setup(struct device_node *np, int id)
-{
- struct resource r;
- struct platform_device *pdev;
- struct mv64x60_wdt_pdata pdata;
- const unsigned int *prop;
- int err;
-
- err = of_address_to_resource(np, 0, &r);
- if (err)
- return err;
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.timeout = 10; /* Default: 10 seconds */
-
- np = of_get_parent(np);
- if (!np)
- return -ENODEV;
-
- prop = of_get_property(np, "clock-frequency", NULL);
- of_node_put(np);
- if (!prop)
- return -ENODEV;
- pdata.bus_clk = *prop / 1000000; /* wdt driver wants freq in MHz */
-
- pdev = platform_device_alloc(MV64x60_WDT_NAME, id);
- if (!pdev)
- return -ENOMEM;
-
- err = platform_device_add_resources(pdev, &r, 1);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-static int __init mv64x60_device_setup(void)
-{
- struct device_node *np, *np2;
- struct platform_device *pdev;
- int id, id2;
- int err;
-
- id = 0;
- for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") {
- err = mv64x60_mpsc_device_setup(np, id++);
- if (err)
- printk(KERN_ERR "Failed to initialize MV64x60 "
- "serial device %pOF: error %d.\n",
- np, err);
- }
-
- id = 0;
- id2 = 0;
- for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") {
- pdev = mv64x60_eth_register_shared_pdev(np, id++);
- if (IS_ERR(pdev)) {
- err = PTR_ERR(pdev);
- printk(KERN_ERR "Failed to initialize MV64x60 "
- "network block %pOF: error %d.\n",
- np, err);
- continue;
- }
- for_each_child_of_node(np, np2) {
- if (!of_device_is_compatible(np2,
- "marvell,mv64360-eth"))
- continue;
- err = mv64x60_eth_device_setup(np2, id2++, pdev);
- if (err)
- printk(KERN_ERR "Failed to initialize "
- "MV64x60 network device %pOF: "
- "error %d.\n",
- np2, err);
- }
- }
-
- id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c") {
- err = mv64x60_i2c_device_setup(np, id++);
- if (err)
- printk(KERN_ERR "Failed to initialize MV64x60 I2C "
- "bus %pOF: error %d.\n",
- np, err);
- }
-
- /* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
- if (np) {
- if ((err = mv64x60_wdt_device_setup(np, id)))
- printk(KERN_ERR "Failed to initialize MV64x60 "
- "Watchdog %pOF: error %d.\n",
- np, err);
- of_node_put(np);
- }
-
- /* Now add every node that is on the device bus */
- for_each_compatible_node(np, NULL, "marvell,mv64360")
- of_platform_bus_probe(np, of_mv64x60_devices, NULL);
-
- return 0;
-}
-arch_initcall(mv64x60_device_setup);
-
-static int __init mv64x60_add_mpsc_console(void)
-{
- struct device_node *np = NULL;
- const char *prop;
-
- prop = of_get_property(of_chosen, "linux,stdout-path", NULL);
- if (prop == NULL)
- goto not_mpsc;
-
- np = of_find_node_by_path(prop);
- if (!np)
- goto not_mpsc;
-
- if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
- goto not_mpsc;
-
- prop = of_get_property(np, "cell-index", NULL);
- if (!prop)
- goto not_mpsc;
-
- add_preferred_console("ttyMM", *(int *)prop, NULL);
-
-not_mpsc:
- return 0;
-}
-console_initcall(mv64x60_add_mpsc_console);
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
deleted file mode 100644
index 1afcdb428e51..000000000000
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
- *
- * Author: Dale Farnsworth <dale@farnsworth.org>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/stat.h>
-#include <linux/pci.h>
-
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
-
-#ifdef CONFIG_SYSFS
-/* 32-bit hex or dec stringified number + '\n' */
-#define MV64X60_VAL_LEN_MAX 11
-#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
-
-static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct pci_dev *phb;
- u32 v;
-
- if (off > 0)
- return 0;
- if (count < MV64X60_VAL_LEN_MAX)
- return -EINVAL;
-
- phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
- if (!phb)
- return -ENODEV;
- pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
- pci_dev_put(phb);
-
- return sprintf(buf, "0x%08x\n", v);
-}
-
-static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct pci_dev *phb;
- u32 v;
-
- if (off > 0)
- return 0;
- if (count <= 0)
- return -EINVAL;
-
- if (sscanf(buf, "%i", &v) != 1)
- return -EINVAL;
-
- phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
- if (!phb)
- return -ENODEV;
- pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
- pci_dev_put(phb);
-
- return count;
-}
-
-static const struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
- .attr = {
- .name = "hs_reg",
- .mode = 0644,
- },
- .size = MV64X60_VAL_LEN_MAX,
- .read = mv64x60_hs_reg_read,
- .write = mv64x60_hs_reg_write,
-};
-
-static int __init mv64x60_sysfs_init(void)
-{
- struct device_node *np;
- struct platform_device *pdev;
- const unsigned int *prop;
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
- if (!np)
- return 0;
-
- prop = of_get_property(np, "hs_reg_valid", NULL);
- of_node_put(np);
-
- pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
-}
-
-subsys_initcall(mv64x60_sysfs_init);
-
-#endif /* CONFIG_SYSFS */
-
-static void mv64x60_pci_fixup_early(struct pci_dev *dev)
-{
- /*
- * Set the host bridge hdr_type to an invalid value so that
- * pci_setup_device() will ignore the host bridge.
- */
- dev->hdr_type = PCI_HEADER_TYPE_INVALID;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
- mv64x60_pci_fixup_early);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
- mv64x60_pci_fixup_early);
-
-static int __init mv64x60_add_bridge(struct device_node *dev)
-{
- int len;
- struct pci_controller *hose;
- struct resource rsrc;
- const int *bus_range;
- int primary;
-
- memset(&rsrc, 0, sizeof(rsrc));
-
- /* Fetch host bridge registers address */
- if (of_address_to_resource(dev, 0, &rsrc)) {
- printk(KERN_ERR "No PCI reg property in device tree\n");
- return -ENODEV;
- }
-
- /* Get bus range if any */
- bus_range = of_get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int))
- printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
- " bus 0\n", dev);
-
- hose = pcibios_alloc_controller(dev);
- if (!hose)
- return -ENOMEM;
-
- hose->first_busno = bus_range ? bus_range[0] : 0;
- hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
- setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0);
- hose->self_busno = hose->first_busno;
-
- printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
- "Firmware bus number: %d->%d\n",
- (unsigned long long)rsrc.start, hose->first_busno,
- hose->last_busno);
-
- /* Interpret the "ranges" property */
- /* This also maps the I/O region and sets isa_io/mem_base */
- primary = (hose->first_busno == 0);
- pci_process_bridge_OF_ranges(hose, dev, primary);
-
- return 0;
-}
-
-void __init mv64x60_pci_init(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
- mv64x60_add_bridge(np);
-}
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
deleted file mode 100644
index a79953deb489..000000000000
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Interrupt handling for Marvell mv64360/mv64460 host bridges (Discovery)
- *
- * Author: Dale Farnsworth <dale@farnsworth.org>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/irq.h>
-
-#include "mv64x60.h"
-
-/* Interrupt Controller Interface Registers */
-#define MV64X60_IC_MAIN_CAUSE_LO 0x0004
-#define MV64X60_IC_MAIN_CAUSE_HI 0x000c
-#define MV64X60_IC_CPU0_INTR_MASK_LO 0x0014
-#define MV64X60_IC_CPU0_INTR_MASK_HI 0x001c
-#define MV64X60_IC_CPU0_SELECT_CAUSE 0x0024
-
-#define MV64X60_HIGH_GPP_GROUPS 0x0f000000
-#define MV64X60_SELECT_CAUSE_HIGH 0x40000000
-
-/* General Purpose Pins Controller Interface Registers */
-#define MV64x60_GPP_INTR_CAUSE 0x0008
-#define MV64x60_GPP_INTR_MASK 0x000c
-
-#define MV64x60_LEVEL1_LOW 0
-#define MV64x60_LEVEL1_HIGH 1
-#define MV64x60_LEVEL1_GPP 2
-
-#define MV64x60_LEVEL1_MASK 0x00000060
-#define MV64x60_LEVEL1_OFFSET 5
-
-#define MV64x60_LEVEL2_MASK 0x0000001f
-
-#define MV64x60_NUM_IRQS 96
-
-static DEFINE_SPINLOCK(mv64x60_lock);
-
-static void __iomem *mv64x60_irq_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-/*
- * Interrupt Controller Handling
- *
- * The interrupt controller handles three groups of interrupts:
- * main low: IRQ0-IRQ31
- * main high: IRQ32-IRQ63
- * gpp: IRQ64-IRQ95
- *
- * This code handles interrupts in two levels. Level 1 selects the
- * interrupt group, and level 2 selects an IRQ within that group.
- * Each group has its own irq_chip structure.
- */
-
-static u32 mv64x60_cached_low_mask;
-static u32 mv64x60_cached_high_mask = MV64X60_HIGH_GPP_GROUPS;
-static u32 mv64x60_cached_gpp_mask;
-
-static struct irq_domain *mv64x60_irq_host;
-
-/*
- * mv64x60_chip_low functions
- */
-
-static void mv64x60_mask_low(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_low_mask &= ~(1 << level2);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
- mv64x60_cached_low_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO);
-}
-
-static void mv64x60_unmask_low(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_low_mask |= 1 << level2;
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
- mv64x60_cached_low_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO);
-}
-
-static struct irq_chip mv64x60_chip_low = {
- .name = "mv64x60_low",
- .irq_mask = mv64x60_mask_low,
- .irq_mask_ack = mv64x60_mask_low,
- .irq_unmask = mv64x60_unmask_low,
-};
-
-/*
- * mv64x60_chip_high functions
- */
-
-static void mv64x60_mask_high(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_high_mask &= ~(1 << level2);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
- mv64x60_cached_high_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI);
-}
-
-static void mv64x60_unmask_high(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_high_mask |= 1 << level2;
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
- mv64x60_cached_high_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI);
-}
-
-static struct irq_chip mv64x60_chip_high = {
- .name = "mv64x60_high",
- .irq_mask = mv64x60_mask_high,
- .irq_mask_ack = mv64x60_mask_high,
- .irq_unmask = mv64x60_unmask_high,
-};
-
-/*
- * mv64x60_chip_gpp functions
- */
-
-static void mv64x60_mask_gpp(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_gpp_mask &= ~(1 << level2);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK);
-}
-
-static void mv64x60_mask_ack_gpp(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_gpp_mask &= ~(1 << level2);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE,
- ~(1 << level2));
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE);
-}
-
-static void mv64x60_unmask_gpp(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_gpp_mask |= 1 << level2;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK);
-}
-
-static struct irq_chip mv64x60_chip_gpp = {
- .name = "mv64x60_gpp",
- .irq_mask = mv64x60_mask_gpp,
- .irq_mask_ack = mv64x60_mask_ack_gpp,
- .irq_unmask = mv64x60_unmask_gpp,
-};
-
-/*
- * mv64x60_host_ops functions
- */
-
-static struct irq_chip *mv64x60_chips[] = {
- [MV64x60_LEVEL1_LOW] = &mv64x60_chip_low,
- [MV64x60_LEVEL1_HIGH] = &mv64x60_chip_high,
- [MV64x60_LEVEL1_GPP] = &mv64x60_chip_gpp,
-};
-
-static int mv64x60_host_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- int level1;
-
- irq_set_status_flags(virq, IRQ_LEVEL);
-
- level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET;
- BUG_ON(level1 > MV64x60_LEVEL1_GPP);
- irq_set_chip_and_handler(virq, mv64x60_chips[level1],
- handle_level_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops mv64x60_host_ops = {
- .map = mv64x60_host_map,
-};
-
-/*
- * Global functions
- */
-
-void __init mv64x60_init_irq(void)
-{
- struct device_node *np;
- phys_addr_t paddr;
- unsigned int size;
- const unsigned int *reg;
- unsigned long flags;
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
- reg = of_get_property(np, "reg", &size);
- paddr = of_translate_address(np, reg);
- mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
- of_node_put(np);
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
- reg = of_get_property(np, "reg", &size);
- paddr = of_translate_address(np, reg);
- mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
-
- mv64x60_irq_host = irq_domain_add_linear(np, MV64x60_NUM_IRQS,
- &mv64x60_host_ops, NULL);
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
- mv64x60_cached_low_mask);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
- mv64x60_cached_high_mask);
-
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, 0);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_LO, 0);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_HI, 0);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
-}
-
-unsigned int mv64x60_get_irq(void)
-{
- u32 cause;
- int level1;
- irq_hw_number_t hwirq;
- int virq = 0;
-
- cause = in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_SELECT_CAUSE);
- if (cause & MV64X60_SELECT_CAUSE_HIGH) {
- cause &= mv64x60_cached_high_mask;
- level1 = MV64x60_LEVEL1_HIGH;
- if (cause & MV64X60_HIGH_GPP_GROUPS) {
- cause = in_le32(mv64x60_gpp_reg_base +
- MV64x60_GPP_INTR_CAUSE);
- cause &= mv64x60_cached_gpp_mask;
- level1 = MV64x60_LEVEL1_GPP;
- }
- } else {
- cause &= mv64x60_cached_low_mask;
- level1 = MV64x60_LEVEL1_LOW;
- }
- if (cause) {
- hwirq = (level1 << MV64x60_LEVEL1_OFFSET) | __ilog2(cause);
- virq = irq_linear_revmap(mv64x60_irq_host, hwirq);
- }
-
- return virq;
-}
diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c
deleted file mode 100644
index 3b8734b870e9..000000000000
--- a/arch/powerpc/sysdev/mv64x60_udbg.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * udbg serial input/output routines for the Marvell MV64x60 (Discovery).
- *
- * Author: Dale Farnsworth <dale@farnsworth.org>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MPSC_0_CR1_OFFSET 0x000c
-
-#define MPSC_0_CR2_OFFSET 0x0010
-#define MPSC_CHR_2_TCS (1 << 9)
-
-#define MPSC_0_CHR_10_OFFSET 0x0030
-
-#define MPSC_INTR_CAUSE_OFF_0 0x0004
-#define MPSC_INTR_CAUSE_OFF_1 0x000c
-#define MPSC_INTR_CAUSE_RCC (1<<6)
-
-static void __iomem *mpsc_base;
-static void __iomem *mpsc_intr_cause;
-
-static void mv64x60_udbg_putc(char c)
-{
- if (c == '\n')
- mv64x60_udbg_putc('\r');
-
- while(in_le32(mpsc_base + MPSC_0_CR2_OFFSET) & MPSC_CHR_2_TCS)
- ;
- out_le32(mpsc_base + MPSC_0_CR1_OFFSET, c);
- out_le32(mpsc_base + MPSC_0_CR2_OFFSET, MPSC_CHR_2_TCS);
-}
-
-static int mv64x60_udbg_testc(void)
-{
- return (in_le32(mpsc_intr_cause) & MPSC_INTR_CAUSE_RCC) != 0;
-}
-
-static int mv64x60_udbg_getc(void)
-{
- int cause = 0;
- int c;
-
- while (!mv64x60_udbg_testc())
- ;
-
- c = in_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2);
- out_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2, c);
- out_le32(mpsc_intr_cause, cause & ~MPSC_INTR_CAUSE_RCC);
- return c;
-}
-
-static int mv64x60_udbg_getc_poll(void)
-{
- if (!mv64x60_udbg_testc())
- return -1;
-
- return mv64x60_udbg_getc();
-}
-
-static void mv64x60_udbg_init(void)
-{
- struct device_node *np, *mpscintr, *stdout = NULL;
- const char *path;
- const phandle *ph;
- struct resource r[2];
- const int *block_index;
- int intr_cause_offset;
- int err;
-
- path = of_get_property(of_chosen, "linux,stdout-path", NULL);
- if (!path)
- return;
-
- stdout = of_find_node_by_path(path);
- if (!stdout)
- return;
-
- for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") {
- if (np == stdout)
- break;
- }
-
- of_node_put(stdout);
- if (!np)
- return;
-
- block_index = of_get_property(np, "cell-index", NULL);
- if (!block_index)
- goto error;
-
- switch (*block_index) {
- case 0:
- intr_cause_offset = MPSC_INTR_CAUSE_OFF_0;
- break;
- case 1:
- intr_cause_offset = MPSC_INTR_CAUSE_OFF_1;
- break;
- default:
- goto error;
- }
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- goto error;
-
- ph = of_get_property(np, "mpscintr", NULL);
- mpscintr = of_find_node_by_phandle(*ph);
- if (!mpscintr)
- goto error;
-
- err = of_address_to_resource(mpscintr, 0, &r[1]);
- of_node_put(mpscintr);
- if (err)
- goto error;
-
- of_node_put(np);
-
- mpsc_base = ioremap(r[0].start, resource_size(&r[0]));
- if (!mpsc_base)
- return;
-
- mpsc_intr_cause = ioremap(r[1].start, resource_size(&r[1]));
- if (!mpsc_intr_cause) {
- iounmap(mpsc_base);
- return;
- }
- mpsc_intr_cause += intr_cause_offset;
-
- udbg_putc = mv64x60_udbg_putc;
- udbg_getc = mv64x60_udbg_getc;
- udbg_getc_poll = mv64x60_udbg_getc_poll;
-
- return;
-
-error:
- of_node_put(np);
-}
-
-void mv64x60_init_early(void)
-{
- mv64x60_udbg_init();
-}
--
2.16.2
\
 
 \ /
  Last update: 2018-04-06 03:18    [W:0.182 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site