lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v2] ARM: dts: qcom: Add apq8064 Dragon Board 600c support
On Fri, Mar 16, 2018 at 09:54:36PM +0000, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>
> This patch add support to DB600c board, which is another
> 96boards based on Qualcomm APQ8064 SoC.
>
> Support for USB, HDMI, PCIe, I2C, SPI, eMMC, microSD card, LEDs
> device tree nodes is added in this patch.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> Changes since v1:
> - added chosen node with stdout, suggested by Stephen Boyd
> - removed spi flash node and gpio22 pinconf, as its not required in this patch.
> - removed extra comment lines and fix a node name, spotted by Stephen Boyd.
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-apq8064-db600c.dts | 530 ++++++++++++++++++++++++++++++
> 2 files changed, 531 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-db600c.dts

Hello Srini (I hope you had a nice vacation!)


Running checkpatch on this patch gives a few of these warnings:

WARNING: line over 80 characters

These can probably be ignored, since they exist for most
arch/arm/boot/dts/qcom-*.dts files.


However, it also gives a few of these errors:

ERROR: trailing whitespace

These should probably be fixed, since the are errors and not warnings.


Kind regards,
Niklas

\
 
 \ /
  Last update: 2018-04-05 21:12    [W:0.088 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site