[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjectuart throughput
Hi All,

I’ve an uart hardware implemented on Xilinx FPGA image and it connects
to host CPU(Intel based chip) on PCIe bus in Linux platform.

The following parameters were fixed or varied when measuring the UART
throughput in internal loopback mode(UART_RX and UART_TX pins were
internally connected):

• Uart baud rate

• Parity Bit

• Stop Bit(s)

The primary factor affecting UART throughput is the baud rate, apart
from this any other factors affect the UART throughput?

For 4000000 bps uart baud rate, what should be the theoretical peak
data throughput?


 \ /
  Last update: 2018-04-05 18:38    [W:0.043 / U:6.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site