lkml.org 
[lkml]   [2018]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Decrease boot time with AHCI drives?
From
Date
[Attach full output of `dmesg`.]

On 04/04/18 11:53, Paul Menzel wrote:
> Dear Linux folks,
>
>
> I am trying to decrease the boot time of the Linux kernel so the LUKS
> passphrase dialog (in the initrd) is shown as quickly as possible. The
> devices I test with is a Lenovo X60 and ASRock E350M1 both running with
> coreboot and the GRUB payload. The goal is to do this without having to
> rebuild a Linux kernel, but only by run-time
>
> I am currently at 1.2 seconds.
>
> ```
> [    0.610437] calling  ata_init+0x0/0x2be [libata] @ 88
> [    0.610548] libata version 3.00 loaded.
> [    0.610570] initcall ata_init+0x0/0x2be [libata] returned 0 after 107
> usecs
> [    0.612100] calling  serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 89
> [    0.612132] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw]
> returned 0 after 25 usecs
> [    0.612659] calling  ahci_pci_driver_init+0x0/0x1000 [ahci] @ 88
> [    0.612715] ahci 0000:00:1f.2: version 3.0
> [    0.613050] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
> [    0.613153] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5
> Gbps 0x1 impl SATA mode
> [    0.613239] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo
> pmp pio slum part
> [    0.613915] calling  evdev_init+0x0/0x1000 [evdev] @ 85
> [    0.614178] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after
> 250 usecs
> [    0.624366] scsi host0: ahci
> [    0.630638] scsi host1: ahci
> [    0.640413] scsi host2: ahci
> [    0.646559] scsi host3: ahci
> [    0.646752] ata1: SATA max UDMA/133 abar m1024@0xe4445000 port
> 0xe4445100 irq 28
> [    0.646836] ata2: DUMMY
> [    0.646902] ata3: DUMMY
> [    0.646964] ata4: DUMMY
> [    0.647098] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned
> 0 after 33619 usecs
> [    1.124129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    1.124605] ata1.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
> [    1.124674] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [    1.125179] ata1.00: configured for UDMA/100
> [    1.125522] scsi 0:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2
> 070H PQ: 0 ANSI: 5
> [    1.129127] calling  init_sd+0x0/0x1000 [sd_mod] @ 84
> [    1.129268] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 129
> usecs
> [    1.129444] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256
> GB/238 GiB)
> [    1.129550] sd 0:0:0:0: [sda] Write Protect is off
> [    1.129619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    1.129647] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [    1.130384]  sda: sda1 sda2
> [    1.131009] sd 0:0:0:0: [sda] Attached SCSI disk
> [    1.213492] calling  dm_init+0x0/0x31 [dm_mod] @ 110
> [    1.213535] device-mapper: uevent: version 1.0.3
> [    1.213727] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20)
> initialised: dm-devel@redhat.com
> [    1.213829] initcall dm_init+0x0/0x31 [dm_mod] returned 0 after 312
> usecs
> [    1.214434] calling  dm_crypt_init+0x0/0x1000 [dm_crypt] @ 110
> [    1.214442] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0
> after 2 usecs
> ```
>
> So, according to `initcall_debug` the method `ahci_pci_driver_init`
> takes 33 ms to execute, which is longer then a few milliseconds.
>
> But more importantly, it takes roughly half a second to set up the
> device. I understand, that the probing is part of AHCI(?), and in this
> case the Crucial m4 SSD drive/firmware is especially slow. So, I assume
> it will be hard to improve anything in the code to decrease the time.
>
> That said, in my case the assumption is, that the device configuration
> will not change. That means, the drive will be the same and will be
> connected to the same port all the time.
>
> Additionally, GRUB already probed the device to read the Linux kernel
> image and initrd image.
>
> So, is there a way to avoid doing the probing twice or at all? That
> means, either cache the settings, and load them during boot by reading
> it from the firmware flash ROM chip, possible when using coreboot, and
> passing it to the Linux kernel for example by GRUB. That would also help
> with LinuxBoot [1], where the Linux kernel is used as the payload (boot
> kernel), already setting up the drive and kexec’s another Linux kernel,
> read from the drive.
>
> Or, GRUB passes the settings it detected to the Linux kernel.
>
>
> Kind regards,
>
> Paul
>
>
> [1] https://www.linuxboot.org/
[ 0.000000] Linux version 4.14.0-0.bpo.3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.14.13-1~bpo9+1 (2018-01-14)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6fbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6fc000-0x000000007f7fffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 636338U/636338U, BIOS CBET4000 4.7-625-g0b861daecc 04/03/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f6fc max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 2 base 0D0000000 mask 0F0000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [ffa00400]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x16ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x16a92000, 0x16a92fff] PGTABLE
[ 0.000000] BRK [0x16a93000, 0x16a94fff] PGTABLE
[ 0.000000] BRK [0x16a95000, 0x16a95fff] PGTABLE
[ 0.000000] BRK [0x16a96000, 0x16a96fff] PGTABLE
[ 0.000000] log_buf_len: 8388608 bytes
[ 0.000000] early log buf free: 128544(98%)
[ 0.000000] RAMDISK: [mem 0x35c6f000-0x36e2efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0800 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007F70D0E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007F7102A0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007F70D280 00301E (v03 COREv4 COREBOOT 20090419 INTL 20160831)
[ 0.000000] ACPI: FACS 0x000000007F70D240 000040
[ 0.000000] ACPI: FACS 0x000000007F70D240 000040
[ 0.000000] ACPI: SSDT 0x000000007F7103A0 000569 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007F710910 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007F710950 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007F710990 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007F712A00 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1152MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x16a97000, 0x16a97fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.000000] HighMem [mem 0x00000000375fe000-0x000000007f6fbfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6fbfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6fbfff]
[ 0.000000] On node 0 totalpages: 521883
[ 0.000000] free_area_init_node: node 0, pgdat d6864480, node_mem_map f4281024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] Normal zone: 1958 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 295166 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 29 pages/cpu @f75c1000 s88908 r0 d29876 u118784
[ 0.000000] pcpu-alloc: s88908 r0 d29876 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 519889
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-0.bpo.3-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro noisapnp cryptomgr.notests pnpbios=off pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 iomem=relaxed memory_corruption_check=1 memory_corruption_check_size=512k i915.fastboot=1 initcall_debug log_buf_len=8M clocksource=hpet apparmor=0
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0007f6fc)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2030848K/2087532K available (6162K kernel code, 604K rwdata, 1916K rodata, 840K init, 452K bss, 56684K reserved, 0K cma-reserved, 1180664K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
cpu_entry : 0xff800000 - 0xffce1000 (4996 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xd688f000 - 0xd6961000 ( 840 kB)
.data : 0xd6604b17 - 0xd6880300 (2541 kB)
.text : 0xd6000000 - 0xd6604b17 (6162 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] ftrace: allocating 27547 entries in 54 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=f70a8000 soft=f70aa000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1662.367 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.73 BogoMIPS (lpj=6649468)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170728
[ 0.011578] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.011704] Security Framework initialized
[ 0.011771] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.011849] AppArmor: AppArmor disabled by boot time parameter
[ 0.011948] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.012010] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.012442] Disabled fast string operations
[ 0.012510] CPU: Physical Processor ID: 0
[ 0.012574] CPU: Processor Core ID: 0
[ 0.012646] mce: CPU supports 6 MCE banks
[ 0.012716] CPU0: Thermal monitoring enabled (TM2)
[ 0.012787] process: using mwait in idle threads
[ 0.012858] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.012925] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.013131] Freeing SMP alternatives memory: 28K
[ 0.015239] smpboot: Max logical packages: 1
[ 0.015317] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.015844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056000] smpboot: CPU0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz (family: 0x6, model: 0xe, stepping: 0xc)
[ 0.056000] calling trace_init_flags_sys_exit+0x0/0x13 @ 1
[ 0.056000] initcall trace_init_flags_sys_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.056000] calling trace_init_flags_sys_enter+0x0/0x13 @ 1
[ 0.056000] initcall trace_init_flags_sys_enter+0x0/0x13 returned 0 after 0 usecs
[ 0.056000] calling init_hw_perf_events+0x0/0x5a6 @ 1
[ 0.056000] Performance Events: Core events, core PMU driver.
[ 0.056000] ... version: 1
[ 0.056000] ... bit width: 40
[ 0.056000] ... generic registers: 2
[ 0.056000] ... value mask: 000000ffffffffff
[ 0.056000] ... max period: 000000007fffffff
[ 0.056000] ... fixed-purpose events: 0
[ 0.056000] ... event mask: 0000000000000003
[ 0.056000] initcall init_hw_perf_events+0x0/0x5a6 returned 0 after 0 usecs
[ 0.056000] calling init_real_mode+0x0/0x123 @ 1
[ 0.056000] initcall init_real_mode+0x0/0x123 returned 0 after 0 usecs
[ 0.056000] calling trace_init_perf_perm_irq_work_exit+0x0/0x16 @ 1
[ 0.056000] initcall trace_init_perf_perm_irq_work_exit+0x0/0x16 returned 0 after 0 usecs
[ 0.056000] calling validate_x2apic+0x0/0x4f @ 1
[ 0.056000] initcall validate_x2apic+0x0/0x4f returned 0 after 0 usecs
[ 0.056000] calling register_nmi_cpu_backtrace_handler+0x0/0x18 @ 1
[ 0.056000] initcall register_nmi_cpu_backtrace_handler+0x0/0x18 returned 0 after 0 usecs
[ 0.056000] calling early_efi_map_fb+0x0/0x3a @ 1
[ 0.056000] initcall early_efi_map_fb+0x0/0x3a returned 0 after 0 usecs
[ 0.056000] calling spawn_ksoftirqd+0x0/0x3e @ 1
[ 0.056000] initcall spawn_ksoftirqd+0x0/0x3e returned 0 after 0 usecs
[ 0.056000] calling migration_init+0x0/0x31 @ 1
[ 0.056000] initcall migration_init+0x0/0x31 returned 0 after 0 usecs
[ 0.056000] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.056000] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.056000] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.056000] Hierarchical SRCU implementation.
[ 0.056000] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.056000] calling rcu_spawn_gp_kthread+0x0/0xfc @ 1
[ 0.056000] initcall rcu_spawn_gp_kthread+0x0/0xfc returned 0 after 0 usecs
[ 0.056000] calling cpu_stop_init+0x0/0x7d @ 1
[ 0.056000] initcall cpu_stop_init+0x0/0x7d returned 0 after 0 usecs
[ 0.056000] calling init_events+0x0/0x3a @ 1
[ 0.056000] initcall init_events+0x0/0x3a returned 0 after 0 usecs
[ 0.056000] calling init_trace_printk+0x0/0xf @ 1
[ 0.056000] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[ 0.056000] calling event_trace_enable_again+0x0/0x40 @ 1
[ 0.056000] initcall event_trace_enable_again+0x0/0x40 returned 0 after 0 usecs
[ 0.056000] calling jump_label_init_module+0x0/0x14 @ 1
[ 0.056000] initcall jump_label_init_module+0x0/0x14 returned 0 after 0 usecs
[ 0.056000] calling dynamic_debug_init+0x0/0x1f0 @ 1
[ 0.056000] initcall dynamic_debug_init+0x0/0x1f0 returned 0 after 0 usecs
[ 0.056000] calling rand_initialize+0x0/0xc0 @ 1
[ 0.056000] initcall rand_initialize+0x0/0xc0 returned 0 after 0 usecs
[ 0.056000] smp: Bringing up secondary CPUs ...
[ 0.056000] CPU 1 irqstacks, hard=f7132000 soft=f7134000
[ 0.056000] x86: Booting SMP configuration:
[ 0.056000] .... node #0, CPUs: #1
[ 0.004000] Initializing CPU#1
[ 0.004000] Disabled fast string operations
[ 0.056084] smp: Brought up 1 node, 2 CPUs
[ 0.056261] smpboot: Total of 2 processors activated (6649.46 BogoMIPS)
[ 0.058070] devtmpfs: initialized
[ 0.058070] calling ipc_ns_init+0x0/0x61 @ 1
[ 0.058070] initcall ipc_ns_init+0x0/0x61 returned 0 after 0 usecs
[ 0.058070] calling init_mmap_min_addr+0x0/0x16 @ 1
[ 0.058070] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
[ 0.058070] calling init_cpufreq_transition_notifier_list+0x0/0x1d @ 1
[ 0.058070] initcall init_cpufreq_transition_notifier_list+0x0/0x1d returned 0 after 0 usecs
[ 0.058070] calling net_ns_init+0x0/0x125 @ 1
[ 0.058070] initcall net_ns_init+0x0/0x125 returned 0 after 0 usecs
[ 0.058070] calling xen_pvh_gnttab_setup+0x0/0x34 @ 1
[ 0.058070] initcall xen_pvh_gnttab_setup+0x0/0x34 returned -19 after 0 usecs
[ 0.058070] calling e820__register_nvs_regions+0x0/0x3e @ 1
[ 0.058070] initcall e820__register_nvs_regions+0x0/0x3e returned 0 after 0 usecs
[ 0.058070] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.058070] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.058070] calling init_cpu_syscore+0x0/0x11 @ 1
[ 0.058070] initcall init_cpu_syscore+0x0/0x11 returned 0 after 0 usecs
[ 0.058070] calling reboot_init+0x0/0x42 @ 1
[ 0.058070] initcall reboot_init+0x0/0x42 returned 0 after 0 usecs
[ 0.058070] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.058070] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.058070] calling pgd_cache_init+0x0/0x47 @ 1
[ 0.058070] initcall pgd_cache_init+0x0/0x47 returned 0 after 0 usecs
[ 0.058070] calling cpu_hotplug_pm_sync_init+0x0/0x16 @ 1
[ 0.058070] initcall cpu_hotplug_pm_sync_init+0x0/0x16 returned 0 after 0 usecs
[ 0.058070] calling alloc_frozen_cpus+0x0/0xc @ 1
[ 0.058070] initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs
[ 0.058070] calling wq_sysfs_init+0x0/0x29 @ 1
[ 0.058070] initcall wq_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.058070] calling ksysfs_init+0x0/0x7d @ 1
[ 0.058070] initcall ksysfs_init+0x0/0x7d returned 0 after 0 usecs
[ 0.058070] calling pm_init+0x0/0x6d @ 1
[ 0.060010] initcall pm_init+0x0/0x6d returned 0 after 0 usecs
[ 0.060010] calling pm_disk_init+0x0/0x19 @ 1
[ 0.060010] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[ 0.060010] calling swsusp_header_init+0x0/0x30 @ 1
[ 0.060010] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 0.060010] calling rcu_set_runtime_mode+0x0/0x16 @ 1
[ 0.060010] initcall rcu_set_runtime_mode+0x0/0x16 returned 0 after 0 usecs
[ 0.060010] calling init_jiffies_clocksource+0x0/0x1b @ 1
[ 0.060010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.060010] initcall init_jiffies_clocksource+0x0/0x1b returned 0 after 0 usecs
[ 0.060010] calling futex_init+0x0/0xd5 @ 1
[ 0.060010] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.060010] initcall futex_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.060010] calling cgroup_wq_init+0x0/0x2c @ 1
[ 0.060010] initcall cgroup_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.060010] calling cgroup1_wq_init+0x0/0x2c @ 1
[ 0.060010] initcall cgroup1_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.060010] calling ftrace_mod_cmd_init+0x0/0xf @ 1
[ 0.060010] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[ 0.060010] calling init_graph_trace+0x0/0x5a @ 1
[ 0.060010] initcall init_graph_trace+0x0/0x5a returned 0 after 0 usecs
[ 0.060010] calling init_per_zone_wmark_min+0x0/0x62 @ 1
[ 0.060010] initcall init_per_zone_wmark_min+0x0/0x62 returned 0 after 0 usecs
[ 0.060010] calling init_zero_pfn+0x0/0x25 @ 1
[ 0.060010] initcall init_zero_pfn+0x0/0x25 returned 0 after 0 usecs
[ 0.060010] calling memory_failure_init+0x0/0x84 @ 1
[ 0.060010] initcall memory_failure_init+0x0/0x84 returned 0 after 0 usecs
[ 0.060010] calling fsnotify_init+0x0/0x44 @ 1
[ 0.060010] initcall fsnotify_init+0x0/0x44 returned 0 after 0 usecs
[ 0.060010] calling filelock_init+0x0/0x7f @ 1
[ 0.060010] initcall filelock_init+0x0/0x7f returned 0 after 0 usecs
[ 0.060010] calling init_script_binfmt+0x0/0x18 @ 1
[ 0.060010] initcall init_script_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.060010] calling init_elf_binfmt+0x0/0x18 @ 1
[ 0.060010] initcall init_elf_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.060010] calling debugfs_init+0x0/0x4b @ 1
[ 0.060010] initcall debugfs_init+0x0/0x4b returned 0 after 0 usecs
[ 0.060010] calling tracefs_init+0x0/0x39 @ 1
[ 0.060010] initcall tracefs_init+0x0/0x39 returned 0 after 0 usecs
[ 0.060010] calling securityfs_init+0x0/0x63 @ 1
[ 0.060010] initcall securityfs_init+0x0/0x63 returned 0 after 0 usecs
[ 0.060010] calling prandom_init+0x0/0xb8 @ 1
[ 0.060010] initcall prandom_init+0x0/0xb8 returned 0 after 0 usecs
[ 0.060010] calling pinctrl_init+0x0/0x9d @ 1
[ 0.060010] pinctrl core: initialized pinctrl subsystem
[ 0.060010] initcall pinctrl_init+0x0/0x9d returned 0 after 0 usecs
[ 0.060010] calling gpiolib_dev_init+0x0/0xb3 @ 1
[ 0.060010] initcall gpiolib_dev_init+0x0/0xb3 returned 0 after 0 usecs
[ 0.060010] calling sfi_sysfs_init+0x0/0xbe @ 1
[ 0.060010] initcall sfi_sysfs_init+0x0/0xbe returned 0 after 0 usecs
[ 0.060010] calling opp_debug_init+0x0/0x39 @ 1
[ 0.060010] initcall opp_debug_init+0x0/0x39 returned 0 after 0 usecs
[ 0.060010] calling cpufreq_core_init+0x0/0x46 @ 1
[ 0.060010] initcall cpufreq_core_init+0x0/0x46 returned 0 after 0 usecs
[ 0.060010] calling cpuidle_init+0x0/0x3b @ 1
[ 0.060010] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[ 0.060010] calling capsule_reboot_register+0x0/0x14 @ 1
[ 0.060010] initcall capsule_reboot_register+0x0/0x14 returned 0 after 0 usecs
[ 0.060010] calling bsp_pm_check_init+0x0/0x16 @ 1
[ 0.060010] initcall bsp_pm_check_init+0x0/0x16 returned 0 after 0 usecs
[ 0.060010] calling sock_init+0x0/0x8f @ 1
[ 0.060010] initcall sock_init+0x0/0x8f returned 0 after 0 usecs
[ 0.060010] calling net_inuse_init+0x0/0x24 @ 1
[ 0.060010] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.060010] calling net_defaults_init+0x0/0x24 @ 1
[ 0.060010] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.060010] calling init_default_flow_dissectors+0x0/0x48 @ 1
[ 0.060010] initcall init_default_flow_dissectors+0x0/0x48 returned 0 after 0 usecs
[ 0.060010] calling netpoll_init+0x0/0x34 @ 1
[ 0.060010] initcall netpoll_init+0x0/0x34 returned 0 after 0 usecs
[ 0.060010] calling netlink_proto_init+0x0/0x137 @ 1
[ 0.060010] NET: Registered protocol family 16
[ 0.060023] initcall netlink_proto_init+0x0/0x137 returned 0 after 0 usecs
[ 0.060027] calling __gnttab_init+0x0/0x50 @ 1
[ 0.060030] initcall __gnttab_init+0x0/0x50 returned -19 after 0 usecs
[ 0.060228] calling irq_sysfs_init+0x0/0x7e @ 1
[ 0.060357] initcall irq_sysfs_init+0x0/0x7e returned 0 after 0 usecs
[ 0.060361] calling bdi_class_init+0x0/0x41 @ 1
[ 0.060371] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
[ 0.060374] calling mm_sysfs_init+0x0/0x27 @ 1
[ 0.060379] initcall mm_sysfs_init+0x0/0x27 returned 0 after 0 usecs
[ 0.060381] calling gpiolib_sysfs_init+0x0/0x85 @ 1
[ 0.060391] initcall gpiolib_sysfs_init+0x0/0x85 returned 0 after 0 usecs
[ 0.060393] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.060400] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.060402] calling pci_driver_init+0x0/0x14 @ 1
[ 0.060416] initcall pci_driver_init+0x0/0x14 returned 0 after 0 usecs
[ 0.060419] calling backlight_class_init+0x0/0x91 @ 1
[ 0.060427] initcall backlight_class_init+0x0/0x91 returned 0 after 0 usecs
[ 0.060430] calling xenbus_init+0x0/0x26e @ 1
[ 0.060432] initcall xenbus_init+0x0/0x26e returned -19 after 0 usecs
[ 0.060435] calling tty_class_init+0x0/0x30 @ 1
[ 0.060441] initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs
[ 0.060444] calling vtconsole_class_init+0x0/0xa7 @ 1
[ 0.060476] initcall vtconsole_class_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.060478] calling mipi_dsi_bus_init+0x0/0x14 @ 1
[ 0.060491] initcall mipi_dsi_bus_init+0x0/0x14 returned 0 after 0 usecs
[ 0.060494] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.060500] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.060503] calling isa_bus_init+0x0/0x38 @ 1
[ 0.060534] initcall isa_bus_init+0x0/0x38 returned 0 after 0 usecs
[ 0.060536] calling regmap_initcall+0x0/0x11 @ 1
[ 0.060542] initcall regmap_initcall+0x0/0x11 returned 0 after 0 usecs
[ 0.060544] calling spi_init+0x0/0x89 @ 1
[ 0.060562] initcall spi_init+0x0/0x89 returned 0 after 0 usecs
[ 0.060564] calling i2c_init+0x0/0xa5 @ 1
[ 0.060589] initcall i2c_init+0x0/0xa5 returned 0 after 0 usecs
[ 0.060592] calling init_ladder+0x0/0x27 @ 1
[ 0.060614] cpuidle: using governor ladder
[ 0.060614] initcall init_ladder+0x0/0x27 returned 0 after 0 usecs
[ 0.060614] calling init_menu+0x0/0x14 @ 1
[ 0.060614] cpuidle: using governor menu
[ 0.060614] initcall init_menu+0x0/0x14 returned 0 after 0 usecs
[ 0.060614] calling amd_postcore_init+0x0/0xfc @ 1
[ 0.060614] initcall amd_postcore_init+0x0/0xfc returned 0 after 0 usecs
[ 0.060614] calling kobject_uevent_init+0x0/0xf @ 1
[ 0.060614] initcall kobject_uevent_init+0x0/0xf returned 0 after 0 usecs
[ 0.060614] calling bts_init+0x0/0x9d @ 1
[ 0.060614] initcall bts_init+0x0/0x9d returned -19 after 0 usecs
[ 0.060614] calling pt_init+0x0/0x31c @ 1
[ 0.060614] initcall pt_init+0x0/0x31c returned -19 after 0 usecs
[ 0.060614] calling boot_params_ksysfs_init+0x0/0x214 @ 1
[ 0.060614] initcall boot_params_ksysfs_init+0x0/0x214 returned 0 after 0 usecs
[ 0.060614] calling sbf_init+0x0/0xf2 @ 1
[ 0.060614] initcall sbf_init+0x0/0xf2 returned 0 after 0 usecs
[ 0.060614] calling arch_kdebugfs_init+0x0/0x23 @ 1
[ 0.060614] initcall arch_kdebugfs_init+0x0/0x23 returned 0 after 0 usecs
[ 0.060614] calling init_pit_clocksource+0x0/0x37 @ 1
[ 0.060614] initcall init_pit_clocksource+0x0/0x37 returned 0 after 0 usecs
[ 0.060614] calling mtrr_if_init+0x0/0x50 @ 1
[ 0.060614] initcall mtrr_if_init+0x0/0x50 returned 0 after 0 usecs
[ 0.060614] calling ffh_cstate_init+0x0/0x2d @ 1
[ 0.060614] initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
[ 0.060614] calling kdump_buf_page_init+0x0/0x3b @ 1
[ 0.060614] initcall kdump_buf_page_init+0x0/0x3b returned 0 after 0 usecs
[ 0.060614] calling activate_jump_labels+0x0/0x35 @ 1
[ 0.060614] initcall activate_jump_labels+0x0/0x35 returned 0 after 0 usecs
[ 0.060614] calling kcmp_cookies_init+0x0/0x2f @ 1
[ 0.060614] initcall kcmp_cookies_init+0x0/0x2f returned 0 after 0 usecs
[ 0.060614] calling acpi_pci_init+0x0/0x60 @ 1
[ 0.060614] ACPI: bus type PCI registered
[ 0.060614] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.060614] initcall acpi_pci_init+0x0/0x60 returned 0 after 0 usecs
[ 0.060614] calling dma_bus_init+0x0/0x91 @ 1
[ 0.060614] initcall dma_bus_init+0x0/0x91 returned 0 after 0 usecs
[ 0.060614] calling dma_channel_table_init+0x0/0xc2 @ 1
[ 0.060614] initcall dma_channel_table_init+0x0/0xc2 returned 0 after 0 usecs
[ 0.060614] calling setup_vcpu_hotplug_event+0x0/0x2d @ 1
[ 0.060614] initcall setup_vcpu_hotplug_event+0x0/0x2d returned -19 after 0 usecs
[ 0.060614] calling register_xen_pci_notifier+0x0/0x34 @ 1
[ 0.060614] initcall register_xen_pci_notifier+0x0/0x34 returned 0 after 0 usecs
[ 0.060614] calling xen_pcpu_init+0x0/0xb2 @ 1
[ 0.060614] initcall xen_pcpu_init+0x0/0xb2 returned -19 after 0 usecs
[ 0.060614] calling dmi_id_init+0x0/0x29e @ 1
[ 0.060614] initcall dmi_id_init+0x0/0x29e returned 0 after 0 usecs
[ 0.060614] calling pci_arch_init+0x0/0x6b @ 1
[ 0.060622] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.060712] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.060780] PCI: Using MMCONFIG for extended config space
[ 0.060846] PCI: Using configuration type 1 for base access
[ 0.060923] initcall pci_arch_init+0x0/0x6b returned 0 after 0 usecs
[ 0.061119] calling fixup_ht_bug+0x0/0x9c @ 1
[ 0.061121] initcall fixup_ht_bug+0x0/0x9c returned 0 after 0 usecs
[ 0.061124] calling topology_init+0x0/0x30 @ 1
[ 0.061215] initcall topology_init+0x0/0x30 returned 0 after 0 usecs
[ 0.061217] calling mtrr_init_finialize+0x0/0x41 @ 1
[ 0.061221] initcall mtrr_init_finialize+0x0/0x41 returned 0 after 0 usecs
[ 0.061223] calling uid_cache_init+0x0/0x85 @ 1
[ 0.061227] initcall uid_cache_init+0x0/0x85 returned 0 after 0 usecs
[ 0.061229] calling param_sysfs_init+0x0/0x164 @ 1
[ 0.062737] initcall param_sysfs_init+0x0/0x164 returned 0 after 3906 usecs
[ 0.062740] calling user_namespace_sysctl_init+0x0/0x31 @ 1
[ 0.062760] initcall user_namespace_sysctl_init+0x0/0x31 returned 0 after 0 usecs
[ 0.062762] calling proc_schedstat_init+0x0/0x1f @ 1
[ 0.062767] initcall proc_schedstat_init+0x0/0x1f returned 0 after 0 usecs
[ 0.062770] calling pm_sysrq_init+0x0/0x1b @ 1
[ 0.064012] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs
[ 0.064012] calling create_proc_profile+0x0/0xd0 @ 1
[ 0.064014] initcall create_proc_profile+0x0/0xd0 returned 0 after 0 usecs
[ 0.064017] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
[ 0.064062] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 0 usecs
[ 0.064064] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 0.064069] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[ 0.064071] calling cgroup_namespaces_init+0x0/0xc @ 1
[ 0.064074] initcall cgroup_namespaces_init+0x0/0xc returned 0 after 0 usecs
[ 0.064076] calling user_namespaces_init+0x0/0x2c @ 1
[ 0.064086] initcall user_namespaces_init+0x0/0x2c returned 0 after 0 usecs
[ 0.064088] calling hung_task_init+0x0/0x49 @ 1
[ 0.064097] initcall hung_task_init+0x0/0x49 returned 0 after 0 usecs
[ 0.064097] calling dev_map_init+0x0/0x16 @ 1
[ 0.064097] initcall dev_map_init+0x0/0x16 returned 0 after 0 usecs
[ 0.064097] calling oom_init+0x0/0x59 @ 1
[ 0.064097] initcall oom_init+0x0/0x59 returned 0 after 0 usecs
[ 0.064097] calling default_bdi_init+0x0/0xa7 @ 1
[ 0.064097] initcall default_bdi_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.064097] calling percpu_enable_async+0x0/0x13 @ 1
[ 0.064097] initcall percpu_enable_async+0x0/0x13 returned 0 after 0 usecs
[ 0.064097] calling kcompactd_init+0x0/0x49 @ 1
[ 0.064097] initcall kcompactd_init+0x0/0x49 returned 0 after 0 usecs
[ 0.064097] calling init_reserve_notifier+0x0/0x7 @ 1
[ 0.064097] initcall init_reserve_notifier+0x0/0x7 returned 0 after 0 usecs
[ 0.064097] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.064097] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.064097] calling init_user_reserve+0x0/0x40 @ 1
[ 0.064097] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.064097] calling swap_init_sysfs+0x0/0x5d @ 1
[ 0.064097] initcall swap_init_sysfs+0x0/0x5d returned 0 after 0 usecs
[ 0.064097] calling swapfile_init+0x0/0x40 @ 1
[ 0.064097] initcall swapfile_init+0x0/0x40 returned 0 after 0 usecs
[ 0.064097] calling hugetlb_init+0x0/0x3b2 @ 1
[ 0.064097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.064097] initcall hugetlb_init+0x0/0x3b2 returned 0 after 0 usecs
[ 0.064097] calling ksm_init+0x0/0x14b @ 1
[ 0.064097] initcall ksm_init+0x0/0x14b returned 0 after 0 usecs
[ 0.064097] calling hugepage_init+0x0/0x12d @ 1
[ 0.064097] initcall hugepage_init+0x0/0x12d returned 0 after 0 usecs
[ 0.064097] calling mem_cgroup_swap_init+0x0/0x51 @ 1
[ 0.064097] initcall mem_cgroup_swap_init+0x0/0x51 returned 0 after 0 usecs
[ 0.064097] calling mem_cgroup_init+0x0/0xc6 @ 1
[ 0.064097] initcall mem_cgroup_init+0x0/0xc6 returned 0 after 0 usecs
[ 0.064097] calling sel_ib_pkey_init+0x0/0x30 @ 1
[ 0.064097] initcall sel_ib_pkey_init+0x0/0x30 returned 0 after 0 usecs
[ 0.064097] calling crypto_wq_init+0x0/0x2c @ 1
[ 0.064097] initcall crypto_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.064097] calling cryptomgr_init+0x0/0x14 @ 1
[ 0.064097] initcall cryptomgr_init+0x0/0x14 returned 0 after 0 usecs
[ 0.064097] calling init_bio+0x0/0xc2 @ 1
[ 0.064113] initcall init_bio+0x0/0xc2 returned 0 after 0 usecs
[ 0.064113] calling blk_settings_init+0x0/0x22 @ 1
[ 0.064113] initcall blk_settings_init+0x0/0x22 returned 0 after 0 usecs
[ 0.064113] calling blk_ioc_init+0x0/0x29 @ 1
[ 0.064113] initcall blk_ioc_init+0x0/0x29 returned 0 after 0 usecs
[ 0.064113] calling blk_softirq_init+0x0/0x63 @ 1
[ 0.064113] initcall blk_softirq_init+0x0/0x63 returned 0 after 0 usecs
[ 0.064113] calling blk_mq_init+0x0/0x26 @ 1
[ 0.064113] initcall blk_mq_init+0x0/0x26 returned 0 after 0 usecs
[ 0.064113] calling genhd_device_init+0x0/0x66 @ 1
[ 0.064113] initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
[ 0.064113] calling irq_poll_setup+0x0/0x5e @ 1
[ 0.064113] initcall irq_poll_setup+0x0/0x5e returned 0 after 0 usecs
[ 0.064113] calling byt_gpio_init+0x0/0x16 @ 1
[ 0.064113] initcall byt_gpio_init+0x0/0x16 returned 0 after 0 usecs
[ 0.064113] calling chv_pinctrl_init+0x0/0x16 @ 1
[ 0.064113] initcall chv_pinctrl_init+0x0/0x16 returned 0 after 0 usecs
[ 0.064113] calling bxt_pinctrl_init+0x0/0x16 @ 1
[ 0.064113] initcall bxt_pinctrl_init+0x0/0x16 returned 0 after 0 usecs
[ 0.064113] calling spt_pinctrl_init+0x0/0x16 @ 1
[ 0.064113] initcall spt_pinctrl_init+0x0/0x16 returned 0 after 0 usecs
[ 0.064113] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.064113] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.064113] calling pci_slot_init+0x0/0x40 @ 1
[ 0.064113] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.064113] calling fbmem_init+0x0/0xcb @ 1
[ 0.064143] initcall fbmem_init+0x0/0xcb returned 0 after 0 usecs
[ 0.064145] calling scan_for_dmi_ipmi+0x0/0x112 @ 1
[ 0.064149] initcall scan_for_dmi_ipmi+0x0/0x112 returned 0 after 0 usecs
[ 0.064151] calling acpi_init+0x0/0x315 @ 1
[ 0.064176] ACPI: Added _OSI(Module Device)
[ 0.064242] ACPI: Added _OSI(Processor Device)
[ 0.064306] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.064372] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.064607] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.066266] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.069600] ACPI: EC: EC started
[ 0.069664] ACPI: EC: interrupt blocked
[ 0.069877] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.069944] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.070028] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.070110] ACPI: Interpreter enabled
[ 0.070207] ACPI: (supports S0 S3 S4 S5)
[ 0.070271] ACPI: Using IOAPIC for interrupt routing
[ 0.070373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.070763] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.083577] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.083813] ACPI: Power Resource [FPWR] (off)
[ 0.084535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.084610] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.084842] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.085711] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.086271] PCI host bridge to bus 0000:00
[ 0.086338] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.086408] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.086477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.086561] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.086644] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.086727] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.086811] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.086895] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.086978] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.087062] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.087144] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.087227] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.087311] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.087394] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.087477] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.087561] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.087644] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.087728] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.087811] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.087889] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.088090] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.088106] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[ 0.088113] pci 0000:00:02.0: reg 0x14: [io 0x50b0-0x50b7]
[ 0.088120] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.088127] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[ 0.088299] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.088313] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[ 0.088550] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.088585] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[ 0.088702] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.088873] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.089002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.089176] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.089302] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.089476] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.089593] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.089767] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.089885] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.090060] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.090122] pci 0000:00:1d.0: reg 0x20: [io 0x5000-0x501f]
[ 0.090304] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.090367] pci 0000:00:1d.1: reg 0x20: [io 0x5020-0x503f]
[ 0.090548] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.090610] pci 0000:00:1d.2: reg 0x20: [io 0x5040-0x505f]
[ 0.090796] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.090858] pci 0000:00:1d.3: reg 0x20: [io 0x5060-0x507f]
[ 0.091048] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.091076] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[ 0.091182] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.091340] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.091566] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.091690] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.091779] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.091851] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.091936] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.092007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.092272] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.092299] pci 0000:00:1f.1: reg 0x10: [io 0x50b8-0x50bf]
[ 0.092311] pci 0000:00:1f.1: reg 0x14: [io 0x50d8-0x50db]
[ 0.092323] pci 0000:00:1f.1: reg 0x18: [io 0x50c0-0x50c7]
[ 0.092336] pci 0000:00:1f.1: reg 0x1c: [io 0x50dc-0x50df]
[ 0.092348] pci 0000:00:1f.1: reg 0x20: [io 0x50a0-0x50af]
[ 0.092374] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.092445] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.092514] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.092584] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.092805] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.092833] pci 0000:00:1f.2: reg 0x10: [io 0x50c8-0x50cf]
[ 0.092845] pci 0000:00:1f.2: reg 0x14: [io 0x50e0-0x50e3]
[ 0.092858] pci 0000:00:1f.2: reg 0x18: [io 0x50d0-0x50d7]
[ 0.092870] pci 0000:00:1f.2: reg 0x1c: [io 0x50e4-0x50e7]
[ 0.092882] pci 0000:00:1f.2: reg 0x20: [io 0x5080-0x508f]
[ 0.092895] pci 0000:00:1f.2: reg 0x24: [mem 0xe4445000-0xe44453ff]
[ 0.092953] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.093107] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.093189] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.093466] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[ 0.093521] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[ 0.093563] pci 0000:01:00.0: reg 0x18: [io 0x4000-0x401f]
[ 0.093767] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.104037] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.104107] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.104113] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.104248] pci 0000:02:00.0: [8086:4227] type 00 class 0x028000
[ 0.104348] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
[ 0.104800] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.116053] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.116127] pci 0000:00:1c.1: bridge window [mem 0xe4200000-0xe42fffff]
[ 0.116207] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.116355] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.116597] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[ 0.116627] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[ 0.116670] pci 0000:05:00.0: supports D1 D2
[ 0.116672] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116785] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[ 0.116813] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[ 0.116916] pci 0000:05:00.1: supports D1 D2
[ 0.116919] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117017] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[ 0.117046] pci 0000:05:00.2: reg 0x10: [mem 0xe2002000-0xe20020ff]
[ 0.117151] pci 0000:05:00.2: supports D1 D2
[ 0.117153] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117301] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.117375] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.117381] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.117390] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.117393] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.117396] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.117399] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.117401] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.117404] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.117407] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.117410] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.117413] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.117415] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.117418] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.117421] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.117424] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.117427] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.117430] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.117433] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.117435] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.117438] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.117441] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.117507] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09
[ 0.117514] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
[ 0.117619] pci_bus 0000:00: on NUMA node 0
[ 0.117822] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.118000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.118176] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.118352] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.118527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.118703] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.118878] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.119054] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.120983] ACPI: EC: interrupt unblocked
[ 0.121057] ACPI: EC: event unblocked
[ 0.121128] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.121211] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.121334] initcall acpi_init+0x0/0x315 returned 0 after 54687 usecs
[ 0.121338] calling pnp_init+0x0/0x14 @ 1
[ 0.121352] initcall pnp_init+0x0/0x14 returned 0 after 0 usecs
[ 0.121354] calling balloon_init+0x0/0x110 @ 1
[ 0.121357] initcall balloon_init+0x0/0x110 returned -19 after 0 usecs
[ 0.121361] calling xen_setup_shutdown_event+0x0/0x40 @ 1
[ 0.121365] initcall xen_setup_shutdown_event+0x0/0x40 returned -19 after 0 usecs
[ 0.121367] calling xenbus_probe_backend_init+0x0/0x4f @ 1
[ 0.121382] initcall xenbus_probe_backend_init+0x0/0x4f returned 0 after 0 usecs
[ 0.121385] calling xenbus_probe_frontend_init+0x0/0x4f @ 1
[ 0.121398] initcall xenbus_probe_frontend_init+0x0/0x4f returned 0 after 0 usecs
[ 0.121401] calling xen_acpi_pad_init+0x0/0x4c @ 1
[ 0.121403] initcall xen_acpi_pad_init+0x0/0x4c returned -19 after 0 usecs
[ 0.121406] calling misc_init+0x0/0xa6 @ 1
[ 0.121417] initcall misc_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.121419] calling tpm_init+0x0/0xba @ 1
[ 0.121430] initcall tpm_init+0x0/0xba returned 0 after 0 usecs
[ 0.121432] calling vga_arb_device_init+0x0/0x17e @ 1
[ 0.121464] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.121464] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.121464] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.121464] vgaarb: loaded
[ 0.121464] initcall vga_arb_device_init+0x0/0x17e returned 0 after 0 usecs
[ 0.121464] calling cn_init+0x0/0xc0 @ 1
[ 0.121464] initcall cn_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.121464] calling dax_fs_init+0x0/0xab @ 1
[ 0.121464] initcall dax_fs_init+0x0/0xab returned 0 after 0 usecs
[ 0.121464] calling dma_buf_init+0x0/0x9b @ 1
[ 0.121464] initcall dma_buf_init+0x0/0x9b returned 0 after 0 usecs
[ 0.121464] calling serio_init+0x0/0x2d @ 1
[ 0.121464] initcall serio_init+0x0/0x2d returned 0 after 0 usecs
[ 0.121464] calling input_init+0x0/0xe1 @ 1
[ 0.121464] initcall input_init+0x0/0xe1 returned 0 after 0 usecs
[ 0.121464] calling rtc_init+0x0/0x47 @ 1
[ 0.121464] initcall rtc_init+0x0/0x47 returned 0 after 0 usecs
[ 0.121464] calling power_supply_class_init+0x0/0x3a @ 1
[ 0.121464] initcall power_supply_class_init+0x0/0x3a returned 0 after 0 usecs
[ 0.121464] calling hwmon_init+0x0/0xd5 @ 1
[ 0.121464] initcall hwmon_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.121464] calling edac_init+0x0/0x6f @ 1
[ 0.121464] EDAC MC: Ver: 3.0.0
[ 0.121464] initcall edac_init+0x0/0x6f returned 0 after 0 usecs
[ 0.121464] calling leds_init+0x0/0x37 @ 1
[ 0.121464] initcall leds_init+0x0/0x37 returned 0 after 0 usecs
[ 0.121464] calling dmi_init+0x0/0xf8 @ 1
[ 0.121464] initcall dmi_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.121464] calling efisubsys_init+0x0/0x25d @ 1
[ 0.121464] initcall efisubsys_init+0x0/0x25d returned 0 after 0 usecs
[ 0.121464] calling devfreq_init+0x0/0x90 @ 1
[ 0.121464] initcall devfreq_init+0x0/0x90 returned 0 after 0 usecs
[ 0.121464] calling ras_init+0x0/0x14 @ 1
[ 0.121464] initcall ras_init+0x0/0x14 returned 0 after 0 usecs
[ 0.121464] calling nvmem_init+0x0/0x14 @ 1
[ 0.121464] initcall nvmem_init+0x0/0x14 returned 0 after 0 usecs
[ 0.121464] calling pci_subsys_init+0x0/0x63 @ 1
[ 0.121464] PCI: Using ACPI for IRQ routing
[ 0.124832] PCI: pci_cache_line_size set to 64 bytes
[ 0.124932] e820: reserve RAM buffer [mem 0x7f6fc000-0x7fffffff]
[ 0.124937] initcall pci_subsys_init+0x0/0x63 returned 0 after 3906 usecs
[ 0.124939] calling proto_init+0x0/0x14 @ 1
[ 0.124944] initcall proto_init+0x0/0x14 returned 0 after 0 usecs
[ 0.124947] calling net_dev_init+0x0/0x1b3 @ 1
[ 0.125096] initcall net_dev_init+0x0/0x1b3 returned 0 after 0 usecs
[ 0.125099] calling neigh_init+0x0/0x78 @ 1
[ 0.125102] initcall neigh_init+0x0/0x78 returned 0 after 0 usecs
[ 0.125105] calling fib_notifier_init+0x0/0x14 @ 1
[ 0.125107] initcall fib_notifier_init+0x0/0x14 returned 0 after 0 usecs
[ 0.125110] calling fib_rules_init+0x0/0xa6 @ 1
[ 0.125114] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.125117] calling init_cgroup_netprio+0x0/0x16 @ 1
[ 0.125120] initcall init_cgroup_netprio+0x0/0x16 returned 0 after 0 usecs
[ 0.125122] calling bpf_lwt_init+0x0/0x19 @ 1
[ 0.125125] initcall bpf_lwt_init+0x0/0x19 returned 0 after 0 usecs
[ 0.125128] calling pktsched_init+0x0/0xf6 @ 1
[ 0.125134] initcall pktsched_init+0x0/0xf6 returned 0 after 0 usecs
[ 0.125136] calling tc_filter_init+0x0/0x79 @ 1
[ 0.125146] initcall tc_filter_init+0x0/0x79 returned 0 after 0 usecs
[ 0.125149] calling tc_action_init+0x0/0x4e @ 1
[ 0.125152] initcall tc_action_init+0x0/0x4e returned 0 after 0 usecs
[ 0.125154] calling genl_init+0x0/0x33 @ 1
[ 0.125164] initcall genl_init+0x0/0x33 returned 0 after 0 usecs
[ 0.125167] calling ipv4_netfilter_init+0x0/0x14 @ 1
[ 0.125170] initcall ipv4_netfilter_init+0x0/0x14 returned 0 after 0 usecs
[ 0.125173] calling wireless_nlevent_init+0x0/0x38 @ 1
[ 0.125176] initcall wireless_nlevent_init+0x0/0x38 returned 0 after 0 usecs
[ 0.125179] calling xen_mcfg_late+0x0/0xf2 @ 1
[ 0.125181] initcall xen_mcfg_late+0x0/0xf2 returned 0 after 0 usecs
[ 0.125184] calling watchdog_init+0x0/0x74 @ 1
[ 0.125226] initcall watchdog_init+0x0/0x74 returned 0 after 0 usecs
[ 0.125226] calling nmi_warning_debugfs+0x0/0x26 @ 1
[ 0.125226] initcall nmi_warning_debugfs+0x0/0x26 returned 0 after 0 usecs
[ 0.125226] calling save_microcode_in_initrd+0x0/0x9b @ 1
[ 0.125226] initcall save_microcode_in_initrd+0x0/0x9b returned 0 after 0 usecs
[ 0.125226] calling hpet_late_init+0x0/0xf6 @ 1
[ 0.125226] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.125226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.125226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.126507] initcall hpet_late_init+0x0/0xf6 returned 0 after 0 usecs
[ 0.126507] calling init_amd_nbs+0x0/0x10d @ 1
[ 0.126507] initcall init_amd_nbs+0x0/0x10d returned 0 after 0 usecs
[ 0.126507] calling sugov_register+0x0/0x14 @ 1
[ 0.126507] initcall sugov_register+0x0/0x14 returned 0 after 0 usecs
[ 0.126507] calling clocksource_done_booting+0x0/0x40 @ 1
[ 0.126507] clocksource: Switched to clocksource hpet
[ 0.126507] initcall clocksource_done_booting+0x0/0x40 returned 0 after 71 usecs
[ 0.126507] calling tracer_init_tracefs+0x0/0x173 @ 1
[ 0.132099] initcall tracer_init_tracefs+0x0/0x173 returned 0 after 7827 usecs
[ 0.132102] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.132108] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 2 usecs
[ 0.132110] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.132121] initcall init_graph_tracefs+0x0/0x2d returned 0 after 7 usecs
[ 0.132124] calling event_trace_init+0x0/0x255 @ 1
[ 0.146024] initcall event_trace_init+0x0/0x255 returned 0 after 13559 usecs
[ 0.146030] calling init_kprobe_trace+0x0/0x83 @ 1
[ 0.146040] initcall init_kprobe_trace+0x0/0x83 returned 0 after 6 usecs
[ 0.146043] calling init_uprobe_trace+0x0/0x4c @ 1
[ 0.146052] initcall init_uprobe_trace+0x0/0x4c returned 0 after 5 usecs
[ 0.146054] calling bpf_init+0x0/0x42 @ 1
[ 0.146071] initcall bpf_init+0x0/0x42 returned 0 after 12 usecs
[ 0.146075] calling init_pipe_fs+0x0/0x46 @ 1
[ 0.146105] initcall init_pipe_fs+0x0/0x46 returned 0 after 26 usecs
[ 0.146108] calling cgroup_writeback_init+0x0/0x2c @ 1
[ 0.146148] initcall cgroup_writeback_init+0x0/0x2c returned 0 after 34 usecs
[ 0.146151] calling inotify_user_setup+0x0/0x4a @ 1
[ 0.146164] initcall inotify_user_setup+0x0/0x4a returned 0 after 9 usecs
[ 0.146166] calling eventpoll_init+0x0/0xe7 @ 1
[ 0.146195] initcall eventpoll_init+0x0/0xe7 returned 0 after 24 usecs
[ 0.146198] calling anon_inode_init+0x0/0x4e @ 1
[ 0.146215] initcall anon_inode_init+0x0/0x4e returned 0 after 12 usecs
[ 0.146217] calling init_dax_wait_table+0x0/0x2f @ 1
[ 0.146255] initcall init_dax_wait_table+0x0/0x2f returned 0 after 32 usecs
[ 0.146258] calling proc_locks_init+0x0/0x1f @ 1
[ 0.146266] initcall proc_locks_init+0x0/0x1f returned 0 after 5 usecs
[ 0.146269] calling dquot_init+0x0/0x101 @ 1
[ 0.146271] VFS: Disk quotas dquot_6.6.0
[ 0.146381] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.146453] initcall dquot_init+0x0/0x101 returned 0 after 175 usecs
[ 0.146455] calling quota_init+0x0/0x25 @ 1
[ 0.146479] initcall quota_init+0x0/0x25 returned 0 after 19 usecs
[ 0.146481] calling proc_cmdline_init+0x0/0x1f @ 1
[ 0.146488] initcall proc_cmdline_init+0x0/0x1f returned 0 after 2 usecs
[ 0.146491] calling proc_consoles_init+0x0/0x1f @ 1
[ 0.146496] initcall proc_consoles_init+0x0/0x1f returned 0 after 2 usecs
[ 0.146499] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.146505] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 1 usecs
[ 0.146507] calling proc_devices_init+0x0/0x1f @ 1
[ 0.146513] initcall proc_devices_init+0x0/0x1f returned 0 after 1 usecs
[ 0.146516] calling proc_interrupts_init+0x0/0x1f @ 1
[ 0.146522] initcall proc_interrupts_init+0x0/0x1f returned 0 after 2 usecs
[ 0.146524] calling proc_loadavg_init+0x0/0x1f @ 1
[ 0.146530] initcall proc_loadavg_init+0x0/0x1f returned 0 after 1 usecs
[ 0.146532] calling proc_meminfo_init+0x0/0x1f @ 1
[ 0.146538] initcall proc_meminfo_init+0x0/0x1f returned 0 after 1 usecs
[ 0.146540] calling proc_stat_init+0x0/0x1f @ 1
[ 0.146546] initcall proc_stat_init+0x0/0x1f returned 0 after 2 usecs
[ 0.146549] calling proc_uptime_init+0x0/0x1f @ 1
[ 0.146554] initcall proc_uptime_init+0x0/0x1f returned 0 after 2 usecs
[ 0.146557] calling proc_version_init+0x0/0x1f @ 1
[ 0.146567] initcall proc_version_init+0x0/0x1f returned 0 after 5 usecs
[ 0.146569] calling proc_softirqs_init+0x0/0x1f @ 1
[ 0.146575] initcall proc_softirqs_init+0x0/0x1f returned 0 after 2 usecs
[ 0.146578] calling proc_kcore_init+0x0/0x6e @ 1
[ 0.146585] initcall proc_kcore_init+0x0/0x6e returned 0 after 3 usecs
[ 0.146587] calling vmcore_init+0x0/0x6bf @ 1
[ 0.146593] initcall vmcore_init+0x0/0x6bf returned 0 after 1 usecs
[ 0.146595] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.146601] initcall proc_kmsg_init+0x0/0x22 returned 0 after 2 usecs
[ 0.146604] calling proc_page_init+0x0/0x4e @ 1
[ 0.146611] initcall proc_page_init+0x0/0x4e returned 0 after 3 usecs
[ 0.146614] calling init_ramfs_fs+0x0/0x22 @ 1
[ 0.146619] initcall init_ramfs_fs+0x0/0x22 returned 0 after 1 usecs
[ 0.146621] calling init_hugetlbfs_fs+0x0/0x13c @ 1
[ 0.146660] initcall init_hugetlbfs_fs+0x0/0x13c returned 0 after 33 usecs
[ 0.146663] calling tomoyo_initerface_init+0x0/0x138 @ 1
[ 0.146669] initcall tomoyo_initerface_init+0x0/0x138 returned 0 after 1 usecs
[ 0.146671] calling aa_create_aafs+0x0/0x31f @ 1
[ 0.146676] initcall aa_create_aafs+0x0/0x31f returned 0 after 1 usecs
[ 0.146678] calling blk_scsi_ioctl_init+0x0/0x352 @ 1
[ 0.146684] initcall blk_scsi_ioctl_init+0x0/0x352 returned 0 after 2 usecs
[ 0.146686] calling dynamic_debug_init_debugfs+0x0/0x5f @ 1
[ 0.146699] initcall dynamic_debug_init_debugfs+0x0/0x5f returned 0 after 9 usecs
[ 0.146702] calling acpi_event_init+0x0/0x31 @ 1
[ 0.146714] initcall acpi_event_init+0x0/0x31 returned 0 after 7 usecs
[ 0.146716] calling pnp_system_init+0x0/0x14 @ 1
[ 0.146743] initcall pnp_system_init+0x0/0x14 returned 0 after 22 usecs
[ 0.146745] calling pnpacpi_init+0x0/0x6c @ 1
[ 0.146747] pnp: PnP ACPI init
[ 0.147025] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.147096] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.147166] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.147236] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.147307] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.147377] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.147446] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.147517] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.147594] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148406] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.148482] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.148585] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.148655] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.148723] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.148797] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148846] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.148916] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.148978] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.149038] pnp 00:06: Plug and Play ACPI device, IDs WACf004 (active)
[ 0.149102] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.149168] pnp: PnP ACPI: found 8 devices
[ 0.149236] initcall pnpacpi_init+0x0/0x6c returned 0 after 2427 usecs
[ 0.149239] calling pnpbios_init+0x0/0x34c @ 1
[ 0.149241] PnPBIOS: Disabled
[ 0.149306] initcall pnpbios_init+0x0/0x34c returned -19 after 61 usecs
[ 0.149308] calling chr_dev_init+0x0/0x9b @ 1
[ 0.153155] initcall chr_dev_init+0x0/0x9b returned 0 after 3750 usecs
[ 0.153159] calling firmware_class_init+0x0/0xd6 @ 1
[ 0.153173] initcall firmware_class_init+0x0/0xd6 returned 0 after 10 usecs
[ 0.153176] calling thermal_init+0x0/0xc8 @ 1
[ 0.153197] initcall thermal_init+0x0/0xc8 returned 0 after 16 usecs
[ 0.153200] calling cpufreq_gov_performance_init+0x0/0x14 @ 1
[ 0.153206] initcall cpufreq_gov_performance_init+0x0/0x14 returned 0 after 1 usecs
[ 0.153209] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 0.153214] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 1 usecs
[ 0.153218] calling map_properties+0x0/0x45f @ 1
[ 0.153222] initcall map_properties+0x0/0x45f returned 0 after 1 usecs
[ 0.153225] calling init_acpi_pm_clocksource+0x0/0x172 @ 1
[ 0.187744] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.187834] initcall init_acpi_pm_clocksource+0x0/0x172 returned 0 after 33793 usecs
[ 0.187836] calling pcibios_assign_resources+0x0/0x9f @ 1
[ 0.187861] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.187943] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.188039] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.188107] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.188180] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.188253] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.188342] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.188413] pci 0000:00:1c.1: bridge window [mem 0xe4200000-0xe42fffff]
[ 0.188491] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.188570] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.188665] pci 0000:05:00.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.188758] pci 0000:05:00.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.188829] pci 0000:05:00.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.188898] pci 0000:05:00.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.188967] pci 0000:05:00.0: CardBus bridge to [bus 06]
[ 0.189034] pci 0000:05:00.0: bridge window [io 0x2000-0x20ff]
[ 0.189105] pci 0000:05:00.0: bridge window [io 0x2400-0x24ff]
[ 0.189176] pci 0000:05:00.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.189262] pci 0000:05:00.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.189335] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[ 0.189403] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.189476] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.189548] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.189639] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.189642] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.189644] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.189647] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.189650] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.189653] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.189656] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.189658] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.189661] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.189664] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.189666] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.189669] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.189672] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.189675] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.189677] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.189680] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.189683] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[ 0.189686] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.189689] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.189691] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[ 0.189694] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.189697] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[ 0.189701] pci_bus 0000:05: resource 0 [io 0x2000-0x3fff]
[ 0.189704] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[ 0.189707] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.189710] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.189712] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.189715] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.189718] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.189720] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.189723] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.189726] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.189728] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.189731] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.189734] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.189736] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.189739] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.189742] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.189744] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.189747] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.189750] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.189753] pci_bus 0000:05: resource 20 [mem 0x80000000-0xfebfffff window]
[ 0.189755] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.189758] pci_bus 0000:06: resource 0 [io 0x2000-0x20ff]
[ 0.189761] pci_bus 0000:06: resource 1 [io 0x2400-0x24ff]
[ 0.189763] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.189766] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.189867] initcall pcibios_assign_resources+0x0/0x9f returned 0 after 1978 usecs
[ 0.189870] calling sysctl_core_init+0x0/0x28 @ 1
[ 0.189898] initcall sysctl_core_init+0x0/0x28 returned 0 after 23 usecs
[ 0.189901] calling eth_offload_init+0x0/0x16 @ 1
[ 0.189906] initcall eth_offload_init+0x0/0x16 returned 0 after 1 usecs
[ 0.189909] calling inet_init+0x0/0x24f @ 1
[ 0.189947] NET: Registered protocol family 2
[ 0.190297] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.190397] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.190514] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.190624] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.190701] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.190840] initcall inet_init+0x0/0x24f returned 0 after 903 usecs
[ 0.190843] calling ipv4_offload_init+0x0/0x6e @ 1
[ 0.190848] initcall ipv4_offload_init+0x0/0x6e returned 0 after 1 usecs
[ 0.190851] calling af_unix_init+0x0/0x4c @ 1
[ 0.190855] NET: Registered protocol family 1
[ 0.190928] initcall af_unix_init+0x0/0x4c returned 0 after 71 usecs
[ 0.190931] calling ipv6_offload_init+0x0/0x77 @ 1
[ 0.190936] initcall ipv6_offload_init+0x0/0x77 returned 0 after 2 usecs
[ 0.190940] calling pci_apply_final_quirks+0x0/0x118 @ 1
[ 0.190957] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.192801] PCI: CLS 64 bytes, default 64
[ 0.192806] initcall pci_apply_final_quirks+0x0/0x118 returned 0 after 1817 usecs
[ 0.192810] calling acpi_reserve_resources+0x0/0xcd @ 1
[ 0.192819] initcall acpi_reserve_resources+0x0/0xcd returned 0 after 5 usecs
[ 0.192822] calling populate_rootfs+0x0/0xf6 @ 1
[ 0.192896] Unpacking initramfs...
[ 0.347526] Freeing initrd memory: 18176K
[ 0.347731] initcall populate_rootfs+0x0/0xf6 returned 0 after 151268 usecs
[ 0.347738] calling pci_iommu_init+0x0/0x39 @ 1
[ 0.347744] initcall pci_iommu_init+0x0/0x39 returned 0 after 1 usecs
[ 0.347951] calling amd_uncore_init+0x0/0x247 @ 1
[ 0.347956] initcall amd_uncore_init+0x0/0x247 returned -19 after 1 usecs
[ 0.347958] calling amd_ibs_init+0x0/0x1cf @ 1
[ 0.347963] initcall amd_ibs_init+0x0/0x1cf returned -19 after 1 usecs
[ 0.347965] calling msr_init+0x0/0xbe @ 1
[ 0.347985] initcall msr_init+0x0/0xbe returned 0 after 15 usecs
[ 0.347987] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.347993] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 1 usecs
[ 0.347996] calling i8259A_init_ops+0x0/0x25 @ 1
[ 0.348002] initcall i8259A_init_ops+0x0/0x25 returned 0 after 1 usecs
[ 0.348049] calling init_tsc_clocksource+0x0/0xb8 @ 1
[ 0.348060] initcall init_tsc_clocksource+0x0/0xb8 returned 0 after 6 usecs
[ 0.348063] calling add_rtc_cmos+0x0/0x8d @ 1
[ 0.348072] initcall add_rtc_cmos+0x0/0x8d returned 0 after 4 usecs
[ 0.348074] calling i8237A_init_ops+0x0/0x16 @ 1
[ 0.348088] initcall i8237A_init_ops+0x0/0x16 returned 0 after 9 usecs
[ 0.348090] calling thermal_throttle_init_device+0x0/0x43 @ 1
[ 0.348143] initcall thermal_throttle_init_device+0x0/0x43 returned 0 after 48 usecs
[ 0.348147] calling ioapic_init_ops+0x0/0x16 @ 1
[ 0.348152] initcall ioapic_init_ops+0x0/0x16 returned 0 after 1 usecs
[ 0.348155] calling register_e820_pmem+0x0/0x45 @ 1
[ 0.348169] initcall register_e820_pmem+0x0/0x45 returned 0 after 10 usecs
[ 0.348172] calling add_pcspkr+0x0/0x5a @ 1
[ 0.348247] initcall add_pcspkr+0x0/0x5a returned 0 after 68 usecs
[ 0.348250] calling sysfb_init+0x0/0x81 @ 1
[ 0.348303] initcall sysfb_init+0x0/0x81 returned 0 after 47 usecs
[ 0.348306] calling pt_dump_init+0x0/0x57 @ 1
[ 0.348310] initcall pt_dump_init+0x0/0x57 returned 0 after 1 usecs
[ 0.348313] calling iosf_mbi_init+0x0/0x1b @ 1
[ 0.348353] initcall iosf_mbi_init+0x0/0x1b returned 0 after 35 usecs
[ 0.348355] calling proc_execdomains_init+0x0/0x1f @ 1
[ 0.348366] initcall proc_execdomains_init+0x0/0x1f returned 0 after 6 usecs
[ 0.348368] calling cpuhp_sysfs_init+0x0/0x5f @ 1
[ 0.348384] initcall cpuhp_sysfs_init+0x0/0x5f returned 0 after 12 usecs
[ 0.348386] calling ioresources_init+0x0/0x32 @ 1
[ 0.348395] initcall ioresources_init+0x0/0x32 returned 0 after 5 usecs
[ 0.348400] calling init_sched_debug_procfs+0x0/0x29 @ 1
[ 0.348406] initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 2 usecs
[ 0.348409] calling snapshot_device_init+0x0/0x14 @ 1
[ 0.348492] initcall snapshot_device_init+0x0/0x14 returned 0 after 77 usecs
[ 0.348495] calling irq_gc_init_ops+0x0/0x16 @ 1
[ 0.348500] initcall irq_gc_init_ops+0x0/0x16 returned 0 after 1 usecs
[ 0.348502] calling irq_pm_init_ops+0x0/0x16 @ 1
[ 0.348507] initcall irq_pm_init_ops+0x0/0x16 returned 0 after 1 usecs
[ 0.348510] calling timekeeping_init_ops+0x0/0x16 @ 1
[ 0.348515] initcall timekeeping_init_ops+0x0/0x16 returned 0 after 1 usecs
[ 0.348518] calling init_clocksource_sysfs+0x0/0x5d @ 1
[ 0.348579] initcall init_clocksource_sysfs+0x0/0x5d returned 0 after 54 usecs
[ 0.348582] calling init_timer_list_procfs+0x0/0x29 @ 1
[ 0.348590] initcall init_timer_list_procfs+0x0/0x29 returned 0 after 4 usecs
[ 0.348593] calling alarmtimer_init+0x0/0x10f @ 1
[ 0.348664] initcall alarmtimer_init+0x0/0x10f returned 0 after 65 usecs
[ 0.348667] calling init_posix_timers+0x0/0x29 @ 1
[ 0.348700] initcall init_posix_timers+0x0/0x29 returned 0 after 27 usecs
[ 0.348703] calling clockevents_init_sysfs+0x0/0x9e @ 1
[ 0.348802] initcall clockevents_init_sysfs+0x0/0x9e returned 0 after 91 usecs
[ 0.348804] calling proc_dma_init+0x0/0x1f @ 1
[ 0.348811] initcall proc_dma_init+0x0/0x1f returned 0 after 2 usecs
[ 0.348813] calling proc_modules_init+0x0/0x1f @ 1
[ 0.348819] initcall proc_modules_init+0x0/0x1f returned 0 after 2 usecs
[ 0.348821] calling kallsyms_init+0x0/0x22 @ 1
[ 0.348826] initcall kallsyms_init+0x0/0x22 returned 0 after 2 usecs
[ 0.348829] calling pid_namespaces_init+0x0/0x3b @ 1
[ 0.348850] initcall pid_namespaces_init+0x0/0x3b returned 0 after 16 usecs
[ 0.348852] calling audit_init+0x0/0x148 @ 1
[ 0.348856] audit: initializing netlink subsys (disabled)
[ 0.349023] initcall audit_init+0x0/0x148 returned 0 after 162 usecs
[ 0.349026] calling audit_watch_init+0x0/0x36 @ 1
[ 0.349028] audit: type=2000 audit(1522827066.348:1): state=initialized audit_enabled=0 res=1
[ 0.349118] initcall audit_watch_init+0x0/0x36 returned 0 after 1 usecs
[ 0.349120] calling audit_fsnotify_init+0x0/0x36 @ 1
[ 0.349125] initcall audit_fsnotify_init+0x0/0x36 returned 0 after 1 usecs
[ 0.349127] calling audit_tree_init+0x0/0x40 @ 1
[ 0.349133] initcall audit_tree_init+0x0/0x40 returned 0 after 2 usecs
[ 0.349135] calling init_kprobes+0x0/0x1a2 @ 1
[ 0.349362] initcall init_kprobes+0x0/0x1a2 returned 0 after 217 usecs
[ 0.349364] calling seccomp_sysctl_init+0x0/0x2a @ 1
[ 0.349374] initcall seccomp_sysctl_init+0x0/0x2a returned 0 after 6 usecs
[ 0.349376] calling utsname_sysctl_init+0x0/0x16 @ 1
[ 0.349388] initcall utsname_sysctl_init+0x0/0x16 returned 0 after 7 usecs
[ 0.349390] calling init_tracepoints+0x0/0x2b @ 1
[ 0.349394] initcall init_tracepoints+0x0/0x2b returned 0 after 1 usecs
[ 0.349397] calling stack_trace_init+0x0/0x9e @ 1
[ 0.349423] initcall stack_trace_init+0x0/0x9e returned 0 after 21 usecs
[ 0.349425] calling init_mmio_trace+0x0/0xf @ 1
[ 0.349432] initcall init_mmio_trace+0x0/0xf returned 0 after 3 usecs
[ 0.349434] calling init_blk_tracer+0x0/0x4d @ 1
[ 0.349447] initcall init_blk_tracer+0x0/0x4d returned 0 after 8 usecs
[ 0.349450] calling perf_event_sysfs_init+0x0/0x78 @ 1
[ 0.349605] initcall perf_event_sysfs_init+0x0/0x78 returned 0 after 146 usecs
[ 0.349607] calling init_uprobes+0x0/0x56 @ 1
[ 0.349615] initcall init_uprobes+0x0/0x56 returned 0 after 4 usecs
[ 0.349617] calling padata_driver_init+0x0/0x35 @ 1
[ 0.349622] initcall padata_driver_init+0x0/0x35 returned 0 after 1 usecs
[ 0.349625] calling kswapd_init+0x0/0x3b @ 1
[ 0.349667] initcall kswapd_init+0x0/0x3b returned 0 after 36 usecs
[ 0.349670] calling extfrag_debug_init+0x0/0x71 @ 1
[ 0.349683] initcall extfrag_debug_init+0x0/0x71 returned 0 after 9 usecs
[ 0.349686] calling mm_compute_batch_init+0x0/0x3b @ 1
[ 0.349691] initcall mm_compute_batch_init+0x0/0x3b returned 0 after 1 usecs
[ 0.349694] calling slab_proc_init+0x0/0x22 @ 1
[ 0.349701] initcall slab_proc_init+0x0/0x22 returned 0 after 3 usecs
[ 0.349703] calling workingset_init+0x0/0x7b @ 1
[ 0.349706] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.349778] initcall workingset_init+0x0/0x7b returned 0 after 70 usecs
[ 0.349780] calling proc_vmalloc_init+0x0/0x22 @ 1
[ 0.349786] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 2 usecs
[ 0.349789] calling procswaps_init+0x0/0x1f @ 1
[ 0.349794] initcall procswaps_init+0x0/0x1f returned 0 after 2 usecs
[ 0.349796] calling init_frontswap+0x0/0x82 @ 1
[ 0.349813] initcall init_frontswap+0x0/0x82 returned 0 after 13 usecs
[ 0.349816] calling slab_proc_init+0x0/0xc @ 1
[ 0.349820] initcall slab_proc_init+0x0/0xc returned 0 after 1 usecs
[ 0.349823] calling cpucache_init+0x0/0x3f @ 1
[ 0.349850] initcall cpucache_init+0x0/0x3f returned 0 after 22 usecs
[ 0.349852] calling init_zbud+0x0/0x20 @ 1
[ 0.349854] zbud: loaded
[ 0.349918] initcall init_zbud+0x0/0x20 returned 0 after 61 usecs
[ 0.349921] calling fcntl_init+0x0/0x29 @ 1
[ 0.349926] initcall fcntl_init+0x0/0x29 returned 0 after 1 usecs
[ 0.349929] calling proc_filesystems_init+0x0/0x1f @ 1
[ 0.349935] initcall proc_filesystems_init+0x0/0x1f returned 0 after 2 usecs
[ 0.349938] calling start_dirtytime_writeback+0x0/0x2c @ 1
[ 0.349944] initcall start_dirtytime_writeback+0x0/0x2c returned 0 after 2 usecs
[ 0.349947] calling blkdev_init+0x0/0x2b @ 1
[ 0.349959] initcall blkdev_init+0x0/0x2b returned 0 after 9 usecs
[ 0.349962] calling dio_init+0x0/0x2c @ 1
[ 0.349967] initcall dio_init+0x0/0x2c returned 0 after 1 usecs
[ 0.349970] calling dnotify_init+0x0/0x6f @ 1
[ 0.349976] initcall dnotify_init+0x0/0x6f returned 0 after 3 usecs
[ 0.349979] calling fanotify_user_setup+0x0/0x6c @ 1
[ 0.349986] initcall fanotify_user_setup+0x0/0x6c returned 0 after 3 usecs
[ 0.349989] calling userfaultfd_init+0x0/0x2c @ 1
[ 0.350002] initcall userfaultfd_init+0x0/0x2c returned 0 after 8 usecs
[ 0.350004] calling aio_setup+0x0/0x91 @ 1
[ 0.350024] initcall aio_setup+0x0/0x91 returned 0 after 16 usecs
[ 0.350027] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.350044] initcall init_devpts_fs+0x0/0x28 returned 0 after 12 usecs
[ 0.350047] calling init_pstore_fs+0x0/0x42 @ 1
[ 0.350054] initcall init_pstore_fs+0x0/0x42 returned 0 after 3 usecs
[ 0.350057] calling ipc_init+0x0/0x51 @ 1
[ 0.350069] initcall ipc_init+0x0/0x51 returned 0 after 8 usecs
[ 0.350072] calling ipc_sysctl_init+0x0/0x16 @ 1
[ 0.350089] initcall ipc_sysctl_init+0x0/0x16 returned 0 after 13 usecs
[ 0.350092] calling init_mqueue_fs+0x0/0xf1 @ 1
[ 0.350136] initcall init_mqueue_fs+0x0/0xf1 returned 0 after 38 usecs
[ 0.350139] calling key_proc_init+0x0/0x50 @ 1
[ 0.350147] initcall key_proc_init+0x0/0x50 returned 0 after 4 usecs
[ 0.350150] calling selinux_nf_ip_init+0x0/0x3c @ 1
[ 0.350155] initcall selinux_nf_ip_init+0x0/0x3c returned 0 after 1 usecs
[ 0.350157] calling init_sel_fs+0x0/0x8b @ 1
[ 0.350163] initcall init_sel_fs+0x0/0x8b returned 0 after 1 usecs
[ 0.350165] calling selnl_init+0x0/0x6e @ 1
[ 0.350175] initcall selnl_init+0x0/0x6e returned 0 after 6 usecs
[ 0.350178] calling sel_netif_init+0x0/0x36 @ 1
[ 0.350183] initcall sel_netif_init+0x0/0x36 returned 0 after 1 usecs
[ 0.350185] calling sel_netnode_init+0x0/0x30 @ 1
[ 0.350190] initcall sel_netnode_init+0x0/0x30 returned 0 after 0 usecs
[ 0.350193] calling sel_netport_init+0x0/0x30 @ 1
[ 0.350198] initcall sel_netport_init+0x0/0x30 returned 0 after 0 usecs
[ 0.350200] calling aurule_init+0x0/0x2a @ 1
[ 0.350205] initcall aurule_init+0x0/0x2a returned 0 after 1 usecs
[ 0.350208] calling crypto_algapi_init+0x0/0x11 @ 1
[ 0.350213] initcall crypto_algapi_init+0x0/0x11 returned 0 after 2 usecs
[ 0.350217] calling rsa_init+0x0/0x40 @ 1
[ 0.350273] alg: self-tests disabled
[ 0.350352] initcall rsa_init+0x0/0x40 returned 0 after 127 usecs
[ 0.350356] calling hmac_module_init+0x0/0x14 @ 1
[ 0.350361] initcall hmac_module_init+0x0/0x14 returned 0 after 1 usecs
[ 0.350363] calling crypto_null_mod_init+0x0/0x46 @ 1
[ 0.350576] initcall crypto_null_mod_init+0x0/0x46 returned 0 after 202 usecs
[ 0.350578] calling md5_mod_init+0x0/0x14 @ 1
[ 0.350632] initcall md5_mod_init+0x0/0x14 returned 0 after 48 usecs
[ 0.350635] calling sha1_generic_mod_init+0x0/0x14 @ 1
[ 0.350687] initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 47 usecs
[ 0.350689] calling sha256_generic_mod_init+0x0/0x19 @ 1
[ 0.350788] initcall sha256_generic_mod_init+0x0/0x19 returned 0 after 92 usecs
[ 0.350790] calling aes_init+0x0/0x14 @ 1
[ 0.350843] initcall aes_init+0x0/0x14 returned 0 after 48 usecs
[ 0.350845] calling crct10dif_mod_init+0x0/0x14 @ 1
[ 0.350896] initcall crct10dif_mod_init+0x0/0x14 returned 0 after 45 usecs
[ 0.350898] calling lzo_mod_init+0x0/0x38 @ 1
[ 0.350998] initcall lzo_mod_init+0x0/0x38 returned 0 after 94 usecs
[ 0.351001] calling asymmetric_key_init+0x0/0x14 @ 1
[ 0.351004] Key type asymmetric registered
[ 0.351071] initcall asymmetric_key_init+0x0/0x14 returned 0 after 65 usecs
[ 0.351073] calling x509_key_init+0x0/0x14 @ 1
[ 0.351076] Asymmetric key parser 'x509' registered
[ 0.351143] initcall x509_key_init+0x0/0x14 returned 0 after 65 usecs
[ 0.351146] calling proc_genhd_init+0x0/0x32 @ 1
[ 0.351154] initcall proc_genhd_init+0x0/0x32 returned 0 after 4 usecs
[ 0.351156] calling init_emergency_pool+0x0/0x91 @ 1
[ 0.351176] bounce: pool size: 64 pages
[ 0.351250] initcall init_emergency_pool+0x0/0x91 returned 0 after 88 usecs
[ 0.351253] calling bsg_init+0x0/0x12f @ 1
[ 0.351267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.351352] initcall bsg_init+0x0/0x12f returned 0 after 92 usecs
[ 0.351354] calling throtl_init+0x0/0x3c @ 1
[ 0.351417] initcall throtl_init+0x0/0x3c returned 0 after 57 usecs
[ 0.351420] calling noop_init+0x0/0x14 @ 1
[ 0.351423] io scheduler noop registered
[ 0.351489] initcall noop_init+0x0/0x14 returned 0 after 64 usecs
[ 0.351491] calling deadline_init+0x0/0x14 @ 1
[ 0.351494] io scheduler deadline registered
[ 0.351560] initcall deadline_init+0x0/0x14 returned 0 after 63 usecs
[ 0.351562] calling cfq_init+0x0/0x6e @ 1
[ 0.351588] io scheduler cfq registered (default)
[ 0.351655] initcall cfq_init+0x0/0x6e returned 0 after 87 usecs
[ 0.351657] calling deadline_init+0x0/0x14 @ 1
[ 0.351660] io scheduler mq-deadline registered
[ 0.351726] initcall deadline_init+0x0/0x14 returned 0 after 63 usecs
[ 0.351729] calling btree_module_init+0x0/0x24 @ 1
[ 0.351734] initcall btree_module_init+0x0/0x24 returned 0 after 1 usecs
[ 0.351736] calling crc_t10dif_mod_init+0x0/0x35 @ 1
[ 0.351743] initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 3 usecs
[ 0.351745] calling percpu_counter_startup+0x0/0x50 @ 1
[ 0.351771] initcall percpu_counter_startup+0x0/0x50 returned 0 after 21 usecs
[ 0.351774] calling audit_classes_init+0x0/0x4f @ 1
[ 0.351781] initcall audit_classes_init+0x0/0x4f returned 0 after 3 usecs
[ 0.351783] calling digsig_init+0x0/0x34 @ 1
[ 0.351789] initcall digsig_init+0x0/0x34 returned 0 after 2 usecs
[ 0.351791] calling sg_pool_init+0x0/0xb1 @ 1
[ 0.351808] initcall sg_pool_init+0x0/0xb1 returned 0 after 13 usecs
[ 0.351811] calling phy_core_init+0x0/0x44 @ 1
[ 0.351821] initcall phy_core_init+0x0/0x44 returned 0 after 6 usecs
[ 0.351824] calling pci_proc_init+0x0/0x5d @ 1
[ 0.351884] initcall pci_proc_init+0x0/0x5d returned 0 after 55 usecs
[ 0.351886] calling pcie_portdrv_init+0x0/0x6e @ 1
[ 0.353489] initcall pcie_portdrv_init+0x0/0x6e returned 0 after 1559 usecs
[ 0.353492] calling aer_service_init+0x0/0x3c @ 1
[ 0.353507] initcall aer_service_init+0x0/0x3c returned 0 after 10 usecs
[ 0.353510] calling pcie_pme_service_init+0x0/0x14 @ 1
[ 0.353551] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 0.353659] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 0.353763] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 0.353875] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 0.353965] initcall pcie_pme_service_init+0x0/0x14 returned 0 after 440 usecs
[ 0.353968] calling dpc_service_init+0x0/0x14 @ 1
[ 0.353982] initcall dpc_service_init+0x0/0x14 returned 0 after 9 usecs
[ 0.353984] calling pci_hotplug_init+0x0/0x35 @ 1
[ 0.353989] initcall pci_hotplug_init+0x0/0x35 returned 0 after 1 usecs
[ 0.353991] calling pcied_init+0x0/0x56 @ 1
[ 0.354013] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 0.354159] initcall pcied_init+0x0/0x56 returned 0 after 159 usecs
[ 0.354162] calling xenfb_init+0x0/0x49 @ 1
[ 0.354166] initcall xenfb_init+0x0/0x49 returned -19 after 0 usecs
[ 0.354169] calling vesafb_driver_init+0x0/0x16 @ 1
[ 0.354189] initcall vesafb_driver_init+0x0/0x16 returned 0 after 15 usecs
[ 0.354191] calling efifb_driver_init+0x0/0x16 @ 1
[ 0.354206] initcall efifb_driver_init+0x0/0x16 returned 0 after 10 usecs
[ 0.354208] calling intel_idle_init+0x0/0x4f5 @ 1
[ 0.354213] intel_idle: does not run on family 6 model 14
[ 0.354217] initcall intel_idle_init+0x0/0x4f5 returned -19 after 4 usecs
[ 0.354220] calling acpi_processor_driver_init+0x0/0x8d @ 1
[ 0.354767] Monitor-Mwait will be used to enter C-1 state
[ 0.354777] Monitor-Mwait will be used to enter C-2 state
[ 0.354782] Monitor-Mwait will be used to enter C-3 state
[ 0.354787] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.355235] initcall acpi_processor_driver_init+0x0/0x8d returned 0 after 983 usecs
[ 0.355239] calling acpi_hed_driver_init+0x0/0x14 @ 1
[ 0.355297] initcall acpi_hed_driver_init+0x0/0x14 returned 0 after 52 usecs
[ 0.355299] calling erst_init+0x0/0x2e1 @ 1
[ 0.355305] initcall erst_init+0x0/0x2e1 returned 0 after 2 usecs
[ 0.355307] calling ghes_init+0x0/0x18d @ 1
[ 0.355312] initcall ghes_init+0x0/0x18d returned -19 after 1 usecs
[ 0.355314] calling extlog_init+0x0/0x359 @ 1
[ 0.355319] initcall extlog_init+0x0/0x359 returned -19 after 1 usecs
[ 0.355321] calling pnpbios_thread_init+0x0/0x62 @ 1
[ 0.355325] initcall pnpbios_thread_init+0x0/0x62 returned 0 after 1 usecs
[ 0.355328] calling isapnp_init+0x0/0xb2f @ 1
[ 0.355330] isapnp: ISA Plug & Play support disabled
[ 0.355398] initcall isapnp_init+0x0/0xb2f returned 0 after 65 usecs
[ 0.355400] calling gpio_clk_driver_init+0x0/0x16 @ 1
[ 0.355422] initcall gpio_clk_driver_init+0x0/0x16 returned 0 after 18 usecs
[ 0.355425] calling plt_clk_driver_init+0x0/0x16 @ 1
[ 0.355441] initcall plt_clk_driver_init+0x0/0x16 returned 0 after 12 usecs
[ 0.355444] calling xenbus_probe_initcall+0x0/0x4d @ 1
[ 0.355448] initcall xenbus_probe_initcall+0x0/0x4d returned -19 after 1 usecs
[ 0.355450] calling xenbus_init+0x0/0x39 @ 1
[ 0.355455] initcall xenbus_init+0x0/0x39 returned -19 after 1 usecs
[ 0.355457] calling xenbus_backend_init+0x0/0x48 @ 1
[ 0.355461] initcall xenbus_backend_init+0x0/0x48 returned -19 after 0 usecs
[ 0.355464] calling hypervisor_subsys_init+0x0/0x26 @ 1
[ 0.355468] initcall hypervisor_subsys_init+0x0/0x26 returned -19 after 1 usecs
[ 0.355471] calling hyper_sysfs_init+0x0/0x149 @ 1
[ 0.355475] initcall hyper_sysfs_init+0x0/0x149 returned -19 after 1 usecs
[ 0.355477] calling platform_driver_init+0x0/0x1b @ 1
[ 0.355511] initcall platform_driver_init+0x0/0x1b returned 0 after 28 usecs
[ 0.355513] calling n_null_init+0x0/0x21 @ 1
[ 0.355518] initcall n_null_init+0x0/0x21 returned 0 after 1 usecs
[ 0.355520] calling pty_init+0x0/0x1e0 @ 1
[ 0.355610] initcall pty_init+0x0/0x1e0 returned 0 after 84 usecs
[ 0.355613] calling sysrq_init+0x0/0x68 @ 1
[ 0.355621] initcall sysrq_init+0x0/0x68 returned 0 after 5 usecs
[ 0.355624] calling xen_hvc_init+0x0/0x215 @ 1
[ 0.355628] initcall xen_hvc_init+0x0/0x215 returned -19 after 1 usecs
[ 0.355630] calling serial8250_init+0x0/0x131 @ 1
[ 0.355634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.355928] 00:06: ttyS0 at I/O 0x200 (irq = 5, base_baud = 921600) is a NS16550A
[ 0.356549] initcall serial8250_init+0x0/0x131 returned 0 after 892 usecs
[ 0.356553] calling serial_pci_driver_init+0x0/0x1b @ 1
[ 0.356603] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 45 usecs
[ 0.356606] calling exar_pci_driver_init+0x0/0x1b @ 1
[ 0.356628] initcall exar_pci_driver_init+0x0/0x1b returned 0 after 17 usecs
[ 0.356630] calling dw8250_platform_driver_init+0x0/0x16 @ 1
[ 0.356651] initcall dw8250_platform_driver_init+0x0/0x16 returned 0 after 16 usecs
[ 0.356654] calling mid8250_pci_driver_init+0x0/0x1b @ 1
[ 0.356674] initcall mid8250_pci_driver_init+0x0/0x1b returned 0 after 16 usecs
[ 0.356676] calling hpet_init+0x0/0x5c @ 1
[ 0.356915] initcall hpet_init+0x0/0x5c returned 0 after 228 usecs
[ 0.356918] calling agp_init+0x0/0x29 @ 1
[ 0.356920] Linux agpgart interface v0.103
[ 0.356987] initcall agp_init+0x0/0x29 returned 0 after 63 usecs
[ 0.356989] calling agp_ali_init+0x0/0x2a @ 1
[ 0.357011] initcall agp_ali_init+0x0/0x2a returned 0 after 17 usecs
[ 0.357013] calling agp_ati_init+0x0/0x2a @ 1
[ 0.357033] initcall agp_ati_init+0x0/0x2a returned 0 after 15 usecs
[ 0.357035] calling agp_amdk7_init+0x0/0x2a @ 1
[ 0.357055] initcall agp_amdk7_init+0x0/0x2a returned 0 after 15 usecs
[ 0.357057] calling agp_amd64_mod_init+0x0/0xf @ 1
[ 0.357120] initcall agp_amd64_mod_init+0x0/0xf returned -19 after 57 usecs
[ 0.357123] calling agp_efficeon_init+0x0/0x3f @ 1
[ 0.357143] initcall agp_efficeon_init+0x0/0x3f returned 0 after 16 usecs
[ 0.357146] calling agp_intel_init+0x0/0x2a @ 1
[ 0.357227] initcall agp_intel_init+0x0/0x2a returned 0 after 75 usecs
[ 0.357230] calling agp_nvidia_init+0x0/0x2a @ 1
[ 0.357250] initcall agp_nvidia_init+0x0/0x2a returned 0 after 16 usecs
[ 0.357252] calling agp_sis_init+0x0/0x2a @ 1
[ 0.357273] initcall agp_sis_init+0x0/0x2a returned 0 after 17 usecs
[ 0.357276] calling agp_serverworks_init+0x0/0x2a @ 1
[ 0.357299] initcall agp_serverworks_init+0x0/0x2a returned 0 after 18 usecs
[ 0.357301] calling agp_via_init+0x0/0x2a @ 1
[ 0.357323] initcall agp_via_init+0x0/0x2a returned 0 after 18 usecs
[ 0.357326] calling init_tis+0x0/0xe9 @ 1
[ 0.357357] initcall init_tis+0x0/0xe9 returned 0 after 27 usecs
[ 0.357360] calling cn_proc_init+0x0/0x35 @ 1
[ 0.357366] initcall cn_proc_init+0x0/0x35 returned 0 after 2 usecs
[ 0.357369] calling topology_sysfs_init+0x0/0x30 @ 1
[ 0.357391] initcall topology_sysfs_init+0x0/0x30 returned 0 after 17 usecs
[ 0.357394] calling cacheinfo_sysfs_init+0x0/0x2a @ 1
[ 0.357646] initcall cacheinfo_sysfs_init+0x0/0x2a returned 165 after 241 usecs
[ 0.357649] calling devcoredump_init+0x0/0x19 @ 1
[ 0.357661] initcall devcoredump_init+0x0/0x19 returned 0 after 8 usecs
[ 0.357665] calling net_olddevs_init+0x0/0x53 @ 1
[ 0.357674] initcall net_olddevs_init+0x0/0x53 returned 0 after 5 usecs
[ 0.357677] calling i8042_init+0x0/0x404 @ 1
[ 0.357742] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.367928] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.368001] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.368212] initcall i8042_init+0x0/0x404 returned 0 after 10283 usecs
[ 0.368215] calling input_leds_init+0x0/0x14 @ 1
[ 0.368221] initcall input_leds_init+0x0/0x14 returned 0 after 1 usecs
[ 0.368223] calling mousedev_init+0x0/0x7a @ 1
[ 0.368363] mousedev: PS/2 mouse device common for all mice
[ 0.368433] initcall mousedev_init+0x0/0x7a returned 0 after 200 usecs
[ 0.368435] calling atkbd_init+0x0/0x25 @ 1
[ 0.368461] initcall atkbd_init+0x0/0x25 returned 0 after 21 usecs
[ 0.368464] calling xenkbd_init+0x0/0x49 @ 1
[ 0.368469] initcall xenkbd_init+0x0/0x49 returned -19 after 1 usecs
[ 0.368471] calling cmos_init+0x0/0x65 @ 1
[ 0.368528] rtc_cmos 00:03: RTC can wake from S4
[ 0.368795] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.368894] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.368992] initcall cmos_init+0x0/0x65 returned 0 after 504 usecs
[ 0.368995] calling intel_pstate_init+0x0/0x2a2 @ 1
[ 0.369001] initcall intel_pstate_init+0x0/0x2a2 returned -19 after 1 usecs
[ 0.369004] calling ledtrig_disk_init+0x0/0x2a @ 1
[ 0.369011] initcall ledtrig_disk_init+0x0/0x2a returned 0 after 3 usecs
[ 0.369014] calling ledtrig_mtd_init+0x0/0x2a @ 1
[ 0.369020] initcall ledtrig_mtd_init+0x0/0x2a returned 0 after 2 usecs
[ 0.369023] calling ledtrig_cpu_init+0x0/0xba @ 1
[ 0.369064] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.369134] initcall ledtrig_cpu_init+0x0/0xba returned 0 after 104 usecs
[ 0.369137] calling ledtrig_panic_init+0x0/0x34 @ 1
[ 0.369146] initcall ledtrig_panic_init+0x0/0x34 returned 0 after 4 usecs
[ 0.369148] calling dmi_sysfs_init+0x0/0xaf @ 1
[ 0.369229] initcall dmi_sysfs_init+0x0/0xaf returned 0 after 75 usecs
[ 0.369232] calling efi_load_efivars+0x0/0x5d @ 1
[ 0.369236] initcall efi_load_efivars+0x0/0x5d returned 0 after 1 usecs
[ 0.369238] calling esrt_sysfs_init+0x0/0x2ac @ 1
[ 0.369243] initcall esrt_sysfs_init+0x0/0x2ac returned -38 after 1 usecs
[ 0.369246] calling efi_capsule_loader_init+0x0/0x39 @ 1
[ 0.369250] initcall efi_capsule_loader_init+0x0/0x39 returned -19 after 1 usecs
[ 0.369252] calling pmc_atom_init+0x0/0x234 @ 1
[ 0.369268] initcall pmc_atom_init+0x0/0x234 returned -19 after 12 usecs
[ 0.369270] calling powercap_init+0x0/0x20d @ 1
[ 0.369337] initcall powercap_init+0x0/0x20d returned 0 after 61 usecs
[ 0.369341] calling pm_check_save_msr+0x0/0x20 @ 1
[ 0.369347] initcall pm_check_save_msr+0x0/0x20 returned 0 after 1 usecs
[ 0.369349] calling sock_diag_init+0x0/0x34 @ 1
[ 0.369383] initcall sock_diag_init+0x0/0x34 returned 0 after 28 usecs
[ 0.369386] calling blackhole_init+0x0/0x14 @ 1
[ 0.369392] initcall blackhole_init+0x0/0x14 returned 0 after 2 usecs
[ 0.369395] calling gre_offload_init+0x0/0x47 @ 1
[ 0.369401] initcall gre_offload_init+0x0/0x47 returned 0 after 1 usecs
[ 0.369403] calling sysctl_ipv4_init+0x0/0x45 @ 1
[ 0.369499] initcall sysctl_ipv4_init+0x0/0x45 returned 0 after 89 usecs
[ 0.369502] calling cubictcp_register+0x0/0x79 @ 1
[ 0.369508] initcall cubictcp_register+0x0/0x79 returned 0 after 1 usecs
[ 0.369510] calling inet6_init+0x0/0x333 @ 1
[ 0.369559] NET: Registered protocol family 10
[ 0.370035] Segment Routing with IPv6
[ 0.370131] initcall inet6_init+0x0/0x333 returned 0 after 601 usecs
[ 0.370134] calling mip6_init+0x0/0xac @ 1
[ 0.370136] mip6: Mobile IPv6
[ 0.370209] initcall mip6_init+0x0/0xac returned 0 after 69 usecs
[ 0.370212] calling packet_init+0x0/0x3e @ 1
[ 0.370221] NET: Registered protocol family 17
[ 0.371088] initcall packet_init+0x0/0x3e returned 0 after 852 usecs
[ 0.371090] calling dcbnl_init+0x0/0x4a @ 1
[ 0.371095] initcall dcbnl_init+0x0/0x4a returned 0 after 1 usecs
[ 0.371097] calling mpls_gso_init+0x0/0x2a @ 1
[ 0.371099] mpls_gso: MPLS GSO support
[ 0.371165] initcall mpls_gso_init+0x0/0x2a returned 0 after 63 usecs
[ 0.371168] calling mcheck_init_device+0x0/0x105 @ 1
[ 0.371329] initcall mcheck_init_device+0x0/0x105 returned 0 after 153 usecs
[ 0.371533] calling mcheck_late_init+0x0/0x69 @ 1
[ 0.371546] initcall mcheck_late_init+0x0/0x69 returned 0 after 8 usecs
[ 0.371548] calling severities_debugfs_init+0x0/0x3a @ 1
[ 0.371555] initcall severities_debugfs_init+0x0/0x3a returned 0 after 2 usecs
[ 0.371557] calling threshold_init_device+0x0/0x47 @ 1
[ 0.371562] initcall threshold_init_device+0x0/0x47 returned 0 after 1 usecs
[ 0.371564] calling microcode_init+0x0/0x1ba @ 1
[ 0.371607] microcode: sig=0x6ec, pf=0x20, revision=0x54
[ 0.371791] microcode: Microcode Update Driver: v2.2.
[ 0.371796] initcall microcode_init+0x0/0x1ba returned 0 after 222 usecs
[ 0.371863] calling hpet_insert_resource+0x0/0x24 @ 1
[ 0.371869] initcall hpet_insert_resource+0x0/0x24 returned 0 after 1 usecs
[ 0.371871] calling update_mp_table+0x0/0x4c2 @ 1
[ 0.371877] initcall update_mp_table+0x0/0x4c2 returned 0 after 1 usecs
[ 0.371879] calling lapic_insert_resource+0x0/0x4c @ 1
[ 0.371885] initcall lapic_insert_resource+0x0/0x4c returned 0 after 1 usecs
[ 0.371887] calling print_ICs+0x0/0x193 @ 1
[ 0.371892] initcall print_ICs+0x0/0x193 returned 0 after 1 usecs
[ 0.371895] calling print_ipi_mode+0x0/0x2b @ 1
[ 0.371897] Using IPI No-Shortcut mode
[ 0.371962] initcall print_ipi_mode+0x0/0x2b returned 0 after 62 usecs
[ 0.371965] calling pat_memtype_list_init+0x0/0x36 @ 1
[ 0.371970] initcall pat_memtype_list_init+0x0/0x36 returned 0 after 1 usecs
[ 0.371972] calling create_tlb_single_page_flush_ceiling+0x0/0x28 @ 1
[ 0.371985] initcall create_tlb_single_page_flush_ceiling+0x0/0x28 returned 0 after 8 usecs
[ 0.371989] calling init_oops_id+0x0/0x50 @ 1
[ 0.371995] initcall init_oops_id+0x0/0x50 returned 0 after 2 usecs
[ 0.371998] calling sched_clock_init_late+0x0/0x95 @ 1
[ 0.372027] initcall sched_clock_init_late+0x0/0x95 returned 0 after 2 usecs
[ 0.372030] calling sched_init_debug+0x0/0x3a @ 1
[ 0.372039] initcall sched_init_debug+0x0/0x3a returned 0 after 5 usecs
[ 0.372042] calling pm_qos_power_init+0x0/0x98 @ 1
[ 0.372299] initcall pm_qos_power_init+0x0/0x98 returned 0 after 246 usecs
[ 0.372302] calling pm_debugfs_init+0x0/0x24 @ 1
[ 0.372308] initcall pm_debugfs_init+0x0/0x24 returned 0 after 3 usecs
[ 0.372311] calling printk_late_init+0x0/0x106 @ 1
[ 0.372317] initcall printk_late_init+0x0/0x106 returned 0 after 1 usecs
[ 0.372320] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
[ 0.372326] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 2 usecs
[ 0.372329] calling debugfs_kprobe_init+0x0/0xb7 @ 1
[ 0.372360] initcall debugfs_kprobe_init+0x0/0xb7 returned 0 after 26 usecs
[ 0.372363] calling taskstats_init+0x0/0x38 @ 1
[ 0.372370] registered taskstats version 1
[ 0.372437] initcall taskstats_init+0x0/0x38 returned 0 after 69 usecs
[ 0.372440] calling fault_around_debugfs+0x0/0x35 @ 1
[ 0.372447] initcall fault_around_debugfs+0x0/0x35 returned 0 after 3 usecs
[ 0.372449] calling max_swapfiles_check+0x0/0xc @ 1
[ 0.372454] initcall max_swapfiles_check+0x0/0xc returned 0 after 1 usecs
[ 0.372456] calling init_zswap+0x0/0x3b3 @ 1
[ 0.372477] zswap: loaded using pool lzo/zbud
[ 0.372709] initcall init_zswap+0x0/0x3b3 returned 0 after 243 usecs
[ 0.372712] calling split_huge_pages_debugfs+0x0/0x35 @ 1
[ 0.372718] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 2 usecs
[ 0.372721] calling check_early_ioremap_leak+0x0/0x38 @ 1
[ 0.372726] initcall check_early_ioremap_leak+0x0/0x38 returned 0 after 1 usecs
[ 0.372729] calling init_root_keyring+0x0/0xf @ 1
[ 0.372749] initcall init_root_keyring+0x0/0xf returned 0 after 15 usecs
[ 0.372751] calling init_profile_hash+0x0/0x72 @ 1
[ 0.372756] initcall init_profile_hash+0x0/0x72 returned 0 after 1 usecs
[ 0.372758] calling init_ima+0x0/0x37 @ 1
[ 0.372763] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.372860] initcall init_ima+0x0/0x37 returned 0 after 95 usecs
[ 0.372862] calling prandom_reseed+0x0/0x27 @ 1
[ 0.372871] initcall prandom_reseed+0x0/0x27 returned 0 after 4 usecs
[ 0.372874] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[ 0.372881] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 3 usecs
[ 0.372883] calling pci_sysfs_init+0x0/0x47 @ 1
[ 0.373296] initcall pci_sysfs_init+0x0/0x47 returned 0 after 398 usecs
[ 0.373299] calling bert_init+0x0/0x1cc @ 1
[ 0.373304] initcall bert_init+0x0/0x1cc returned 0 after 1 usecs
[ 0.373306] calling clk_debug_init+0x0/0x110 @ 1
[ 0.373323] initcall clk_debug_init+0x0/0x110 returned 0 after 12 usecs
[ 0.373325] calling boot_wait_for_devices+0x0/0x2d @ 1
[ 0.373330] initcall boot_wait_for_devices+0x0/0x2d returned -19 after 1 usecs
[ 0.373334] calling deferred_probe_initcall+0x0/0x30 @ 1
[ 0.373346] initcall deferred_probe_initcall+0x0/0x30 returned 0 after 7 usecs
[ 0.373349] calling pm_genpd_debug_init+0x0/0x116 @ 1
[ 0.373357] initcall pm_genpd_debug_init+0x0/0x116 returned 0 after 4 usecs
[ 0.373360] calling genpd_power_off_unused+0x0/0x68 @ 1
[ 0.373365] initcall genpd_power_off_unused+0x0/0x68 returned 0 after 1 usecs
[ 0.373367] calling rtc_hctosys+0x0/0xdf @ 1
[ 0.373421] rtc_cmos 00:03: setting system clock to 2018-04-04 07:31:06 UTC (1522827066)
[ 0.373508] initcall rtc_hctosys+0x0/0xdf returned 0 after 133 usecs
[ 0.373510] calling firmware_memmap_init+0x0/0x2d @ 1
[ 0.373550] initcall firmware_memmap_init+0x0/0x2d returned 0 after 35 usecs
[ 0.373554] calling register_update_efi_random_seed+0x0/0x30 @ 1
[ 0.373559] initcall register_update_efi_random_seed+0x0/0x30 returned 0 after 1 usecs
[ 0.373561] calling efi_shutdown_init+0x0/0x3c @ 1
[ 0.373566] initcall efi_shutdown_init+0x0/0x3c returned -19 after 1 usecs
[ 0.373569] calling pci_mmcfg_late_insert_resources+0x0/0x49 @ 1
[ 0.373574] initcall pci_mmcfg_late_insert_resources+0x0/0x49 returned 0 after 2 usecs
[ 0.373577] calling tcp_congestion_default+0x0/0x14 @ 1
[ 0.373583] initcall tcp_congestion_default+0x0/0x14 returned 0 after 1 usecs
[ 0.373586] calling software_resume+0x0/0x2a0 @ 1
[ 0.373592] initcall software_resume+0x0/0x2a0 returned -2 after 1 usecs
[ 0.373594] calling clear_boot_tracer+0x0/0x2a @ 1
[ 0.373599] initcall clear_boot_tracer+0x0/0x2a returned 0 after 1 usecs
[ 0.373603] calling clk_disable_unused+0x0/0x100 @ 1
[ 0.373609] initcall clk_disable_unused+0x0/0x100 returned 0 after 2 usecs
[ 0.374829] Freeing unused kernel memory: 840K
[ 0.374966] Write protecting the kernel text: 6164k
[ 0.375162] Write protecting the kernel read-only data: 1936k
[ 0.375228] NX-protecting the kernel data: 4076k
[ 0.375698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.376107] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.578600] calling acpi_button_driver_init+0x0/0x1000 [button] @ 84
[ 0.578737] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input2
[ 0.579210] ACPI: Sleep Button [SLPB]
[ 0.580208] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input3
[ 0.583824] ACPI: Lid Switch [LID]
[ 0.584122] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 0.584198] calling acpi_thermal_init+0x0/0x1000 [thermal] @ 81
[ 0.584274] ACPI: Power Button [PWRF]
[ 0.584384] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 5639 usecs
[ 0.586133] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.586880] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.586949] ACPI: Thermal Zone [THM0] (47 C)
[ 0.587455] calling acpi_video_init+0x0/0x1000 [video] @ 85
[ 0.587481] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 18 usecs
[ 0.588939] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.589010] ACPI: Thermal Zone [THM1] (43 C)
[ 0.589119] initcall acpi_thermal_init+0x0/0x1000 [thermal] returned 0 after 4795 usecs
[ 0.592573] calling acpi_fan_driver_init+0x0/0x1000 [fan] @ 80
[ 0.594773] initcall acpi_fan_driver_init+0x0/0x1000 [fan] returned 0 after 2141 usecs
[ 0.607161] calling init_scsi+0x0/0x79 [scsi_mod] @ 88
[ 0.607287] SCSI subsystem initialized
[ 0.607375] initcall init_scsi+0x0/0x79 [scsi_mod] returned 0 after 188 usecs
[ 0.610437] calling ata_init+0x0/0x2be [libata] @ 88
[ 0.610548] libata version 3.00 loaded.
[ 0.610570] initcall ata_init+0x0/0x2be [libata] returned 0 after 107 usecs
[ 0.612100] calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 89
[ 0.612132] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 25 usecs
[ 0.612659] calling ahci_pci_driver_init+0x0/0x1000 [ahci] @ 88
[ 0.612715] ahci 0000:00:1f.2: version 3.0
[ 0.613050] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.613153] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 0.613239] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 0.613915] calling evdev_init+0x0/0x1000 [evdev] @ 85
[ 0.614178] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 250 usecs
[ 0.624366] scsi host0: ahci
[ 0.630638] scsi host1: ahci
[ 0.640413] scsi host2: ahci
[ 0.646559] scsi host3: ahci
[ 0.646752] ata1: SATA max UDMA/133 abar m1024@0xe4445000 port 0xe4445100 irq 28
[ 0.646836] ata2: DUMMY
[ 0.646902] ata3: DUMMY
[ 0.646964] ata4: DUMMY
[ 0.647098] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 33619 usecs
[ 1.124129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.124605] ata1.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[ 1.124674] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.125179] ata1.00: configured for UDMA/100
[ 1.125522] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
[ 1.129127] calling init_sd+0x0/0x1000 [sd_mod] @ 84
[ 1.129268] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 129 usecs
[ 1.129444] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.129550] sd 0:0:0:0: [sda] Write Protect is off
[ 1.129619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.129647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.130384] sda: sda1 sda2
[ 1.131009] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.213492] calling dm_init+0x0/0x31 [dm_mod] @ 110
[ 1.213535] device-mapper: uevent: version 1.0.3
[ 1.213727] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.213829] initcall dm_init+0x0/0x31 [dm_mod] returned 0 after 312 usecs
[ 1.214434] calling dm_crypt_init+0x0/0x1000 [dm_crypt] @ 110
[ 1.214442] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 2 usecs
[ 1.376157] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f648b8858, max_idle_ns: 440795225116 ns
[ 7.339202] calling crypto_cbc_module_init+0x0/0x1000 [cbc] @ 140
[ 7.339210] initcall crypto_cbc_module_init+0x0/0x1000 [cbc] returned 0 after 2 usecs
[ 7.563972] calling aes_init+0x0/0x1000 [aes_i586] @ 186
[ 7.564489] initcall aes_init+0x0/0x1000 [aes_i586] returned 0 after 497 usecs
[ 7.565069] calling cryptd_init+0x0/0x1000 [cryptd] @ 186
[ 7.565085] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 8 usecs
[ 7.565683] calling aesni_init+0x0/0x113 [aesni_intel] @ 186
[ 7.565691] initcall aesni_init+0x0/0x113 [aesni_intel] returned -19 after 1 usecs
[ 7.596617] calling padlock_init+0x0/0x1000 [padlock_aes] @ 186
[ 7.596625] initcall padlock_init+0x0/0x1000 [padlock_aes] returned -19 after 2 usecs
[ 7.636599] calling crypto_ecb_module_init+0x0/0x1000 [ecb] @ 186
[ 7.636606] initcall crypto_ecb_module_init+0x0/0x1000 [ecb] returned 0 after 2 usecs
[ 7.637217] calling fscrypt_init+0x0/0x1000 [fscrypto] @ 186
[ 7.637287] initcall fscrypt_init+0x0/0x1000 [fscrypto] returned 0 after 60 usecs
[ 7.637513] calling crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 186
[ 7.637519] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned -19 after 1 usecs
[ 7.676565] calling crc32c_mod_init+0x0/0x1000 [crc32c_generic] @ 186
[ 7.676629] initcall crc32c_mod_init+0x0/0x1000 [crc32c_generic] returned 0 after 56 usecs
[ 7.678090] calling journal_init+0x0/0x7e7 [jbd2] @ 186
[ 7.678177] initcall journal_init+0x0/0x7e7 [jbd2] returned 0 after 71 usecs
[ 7.678538] calling mbcache_init+0x0/0x1000 [mbcache] @ 186
[ 7.678548] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 4 usecs
[ 7.685615] calling ext4_init_fs+0x0/0x160 [ext4] @ 186
[ 7.685727] initcall ext4_init_fs+0x0/0x160 [ext4] returned 0 after 74 usecs
[ 7.758752] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.963382] random: crng init done
[ 8.132428] calling init_autofs4_fs+0x0/0x23 [autofs4] @ 1
[ 8.132544] initcall init_autofs4_fs+0x0/0x23 [autofs4] returned 0 after 104 usecs
[ 8.141855] calling xt_init+0x0/0x1000 [x_tables] @ 1
[ 8.141865] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 2 usecs
[ 8.144129] calling ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[ 8.144140] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.144215] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 78 usecs
[ 8.154861] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 8.172258] systemd[1]: Detected architecture x86.
[ 8.178904] systemd[1]: Set hostname to <gm-debian>.
[ 8.460384] systemd[1]: Listening on Journal Socket.
[ 8.460887] systemd[1]: Created slice User and Session Slice.
[ 8.461061] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.461261] systemd[1]: Listening on Syslog Socket.
[ 8.461647] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.461824] systemd[1]: Reached target Remote File Systems.
[ 8.462026] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.534859] calling parport_default_proc_register+0x0/0x1000 [parport] @ 252
[ 8.534894] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 26 usecs
[ 8.539973] calling ppdev_init+0x0/0x1000 [ppdev] @ 252
[ 8.554741] ppdev: user-space parallel port driver
[ 8.554821] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 14489 usecs
[ 9.239880] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[ 9.299902] systemd-journald[250]: Received request to flush runtime journal from PID 1
[ 9.668007] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 295
[ 9.668674] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 618 usecs
[ 9.672829] calling pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] @ 295
[ 9.672845] initcall pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] returned -19 after 7 usecs
[ 9.712643] calling pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] @ 293
[ 9.712657] initcall pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] returned -19 after 7 usecs
[ 9.712864] calling ledtrig_usb_init+0x0/0x1000 [usb_common] @ 299
[ 9.712874] initcall ledtrig_usb_init+0x0/0x1000 [usb_common] returned 0 after 5 usecs
[ 9.722295] calling acpi_ac_init+0x0/0x1000 [ac] @ 290
[ 9.722876] calling shpcd_init+0x0/0x1000 [shpchp] @ 298
[ 9.722920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.723000] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 113 usecs
[ 9.725306] calling init_soundcore+0x0/0x1000 [soundcore] @ 292
[ 9.725325] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 11 usecs
[ 9.726822] calling usb_init+0x0/0x146 [usbcore] @ 299
[ 9.726840] ACPI: bus type USB registered
[ 9.726951] usbcore: registered new interface driver usbfs
[ 9.727034] usbcore: registered new interface driver hub
[ 9.727133] usbcore: registered new device driver usb
[ 9.727222] initcall usb_init+0x0/0x146 [usbcore] returned 0 after 367 usecs
[ 9.735503] calling alsa_sound_init+0x0/0x7d [snd] @ 292
[ 9.735538] initcall alsa_sound_init+0x0/0x7d [snd] returned 0 after 21 usecs
[ 9.736116] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 297
[ 9.736120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.736209] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 82 usecs
[ 9.748919] calling uhci_hcd_init+0x0/0x1000 [uhci_hcd] @ 297
[ 9.748923] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.749260] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.749339] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 9.749434] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 9.749540] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[ 9.752574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.752648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.752733] usb usb1: Product: UHCI Host Controller
[ 9.752799] usb usb1: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[ 9.752869] usb usb1: SerialNumber: 0000:00:1d.0
[ 9.753181] hub 1-0:1.0: USB hub found
[ 9.753261] hub 1-0:1.0: 2 ports detected
[ 9.754851] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 292
[ 9.755355] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.758473] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 3525 usecs
[ 9.758670] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 9.758767] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 9.758875] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[ 9.759035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.759106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.759189] usb usb2: Product: UHCI Host Controller
[ 9.759256] usb usb2: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[ 9.759327] usb usb2: SerialNumber: 0000:00:1d.1
[ 9.777188] hub 2-0:1.0: USB hub found
[ 9.777277] hub 2-0:1.0: 2 ports detected
[ 9.777603] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 292
[ 9.777622] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 6 usecs
[ 9.778083] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.782686] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 9.788889] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 9.792537] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 292
[ 9.792550] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 7 usecs
[ 9.792620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[ 9.792915] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.792988] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.793074] usb usb3: Product: UHCI Host Controller
[ 9.793143] usb usb3: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[ 9.793215] usb usb3: SerialNumber: 0000:00:1d.2
[ 9.793402] calling acpi_battery_init+0x0/0xf90 [battery] @ 298
[ 9.793417] initcall acpi_battery_init+0x0/0xf90 [battery] returned 0 after 8 usecs
[ 9.793926] calling rfkill_init+0x0/0xcb [rfkill] @ 291
[ 9.794485] initcall rfkill_init+0x0/0xcb [rfkill] returned 0 after 537 usecs
[ 9.797745] calling nvram_init+0x0/0x1000 [nvram] @ 291
[ 9.799515] Non-volatile memory driver v1.3
[ 9.799593] initcall nvram_init+0x0/0x1000 [nvram] returned 0 after 1794 usecs
[ 9.803502] hub 3-0:1.0: USB hub found
[ 9.803585] hub 3-0:1.0: 2 ports detected
[ 9.810524] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 9.810609] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 9.810702] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 9.810807] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[ 9.813331] calling hda_bus_init+0x0/0xf [snd_hda_core] @ 292
[ 9.813361] initcall hda_bus_init+0x0/0xf [snd_hda_core] returned 0 after 16 usecs
[ 9.813784] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.813862] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.813947] usb usb4: Product: UHCI Host Controller
[ 9.814015] usb usb4: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[ 9.814085] usb usb4: SerialNumber: 0000:00:1d.3
[ 9.818833] hub 4-0:1.0: USB hub found
[ 9.818926] hub 4-0:1.0: 2 ports detected
[ 9.819240] initcall uhci_hcd_init+0x0/0x1000 [uhci_hcd] returned 0 after 68660 usecs
[ 9.825921] calling thinkpad_acpi_module_init+0x0/0xa5c [thinkpad_acpi] @ 291
[ 9.826063] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 9.826133] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 9.826198] thinkpad_acpi: ThinkPad BIOS CBET4000 4.7-625-g0b861daecc, EC 7JHT12WW-3.4
[ 9.826281] thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 636338U
[ 9.832346] ACPI: AC Adapter [AC] (on-line)
[ 9.832479] initcall acpi_ac_init+0x0/0x1000 [ac] returned 0 after 107591 usecs
[ 9.835166] thinkpad_acpi: radio switch found; radios are disabled
[ 9.835462] ACPI: Battery Slot [BAT0] (battery absent)
[ 9.836231] ACPI: Battery Slot [BAT1] (battery absent)
[ 9.839118] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 9.839355] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 9.839445] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 9.846412] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 9.849158] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 9.857082] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 9.857272] initcall thinkpad_acpi_module_init+0x0/0xa5c [thinkpad_acpi] returned 0 after 30594 usecs
[ 9.871332] calling azx_driver_init+0x0/0xfe4 [snd_hda_intel] @ 292
[ 9.877470] calling ehci_pci_init+0x0/0x1000 [ehci_pci] @ 300
[ 9.877474] ehci-pci: EHCI PCI platform driver
[ 9.882684] calling pps_init+0x0/0x1000 [pps_core] @ 299
[ 9.882702] pps_core: LinuxPPS API ver. 1 registered
[ 9.882773] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.882864] initcall pps_init+0x0/0x1000 [pps_core] returned 0 after 168 usecs
[ 9.883935] calling hwrng_modinit+0x0/0x1000 [rng_core] @ 297
[ 9.884656] calling ptp_init+0x0/0x1000 [ptp] @ 299
[ 9.884669] PTP clock support registered
[ 9.884748] initcall ptp_init+0x0/0x1000 [ptp] returned 0 after 83 usecs
[ 9.886166] calling piix_init+0x0/0x1000 [ata_piix] @ 293
[ 9.892029] calling i2c_i801_init+0x0/0x1000 [i2c_i801] @ 298
[ 9.892475] initcall hwrng_modinit+0x0/0x1000 [rng_core] returned 0 after 8330 usecs
[ 9.904461] calling mod_init+0x0/0xf56 [intel_rng] @ 297
[ 9.904530] intel_rng: FWH not detected
[ 9.904609] initcall mod_init+0x0/0xf56 [intel_rng] returned -19 after 138 usecs
[ 9.918577] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010
[ 9.920268] initcall azx_driver_init+0x0/0xfe4 [snd_hda_intel] returned 0 after 47771 usecs
[ 9.929665] calling init_pcmcia_cs+0x0/0x1000 [pcmcia_core] @ 290
[ 9.929685] initcall init_pcmcia_cs+0x0/0x1000 [pcmcia_core] returned 0 after 10 usecs
[ 9.933322] calling e1000_init_module+0x0/0x1000 [e1000e] @ 299
[ 9.933326] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.933399] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.933854] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 9.934804] calling nonstatic_sysfs_init+0x0/0x1000 [pcmcia_rsrc] @ 290
[ 9.934811] initcall nonstatic_sysfs_init+0x0/0x1000 [pcmcia_rsrc] returned 0 after 1 usecs
[ 9.954554] calling yenta_cardbus_driver_init+0x0/0x1000 [yenta_socket] @ 290
[ 9.954759] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[ 9.955990] calling fw_core_init+0x0/0x1000 [firewire_core] @ 289
[ 9.965676] initcall fw_core_init+0x0/0x1000 [firewire_core] returned 0 after 9439 usecs
[ 9.973418] calling mmc_init+0x0/0x954 [mmc_core] @ 292
[ 9.973477] initcall mmc_init+0x0/0x954 [mmc_core] returned 0 after 39 usecs
[ 9.989531] calling cfg80211_init+0x0/0xb8 [cfg80211] @ 291
[ 9.989536] calling init_sg+0x0/0x1000 [sg] @ 295
[ 9.989848] initcall cfg80211_init+0x0/0xb8 [cfg80211] returned 0 after 264 usecs
[ 9.992949] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 307
[ 9.992981] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 21 usecs
[ 9.994330] calling analog_driver_init+0x0/0x1000 [snd_hda_codec_analog] @ 307
[ 9.994634] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[ 9.994729] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.994814] snd_hda_codec_analog hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.994896] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 9.994965] snd_hda_codec_analog hdaudioC0D0: dig-out=0xa/0x0
[ 9.995033] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 9.995101] snd_hda_codec_analog hdaudioC0D0: Mic=0x8
[ 9.995168] snd_hda_codec_analog hdaudioC0D0: CD=0x19
[ 9.997747] calling fw_ohci_init+0x0/0x1000 [firewire_ohci] @ 289
[ 10.007561] calling lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 297
[ 10.008094] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.008192] initcall init_sg+0x0/0x1000 [sg] returned 0 after 18204 usecs
[ 10.018655] calling sdhci_drv_init+0x0/0x1000 [sdhci] @ 292
[ 10.018660] sdhci: Secure Digital Host Controller Interface driver
[ 10.018737] sdhci: Copyright(c) Pierre Ossman
[ 10.018810] initcall sdhci_drv_init+0x0/0x1000 [sdhci] returned 0 after 142 usecs
[ 10.024359] calling ieee80211_init+0x0/0x34 [mac80211] @ 291
[ 10.024407] initcall ieee80211_init+0x0/0x34 [mac80211] returned 0 after 9 usecs
[ 10.030025] initcall analog_driver_init+0x0/0x1000 [snd_hda_codec_analog] returned 0 after 34845 usecs
[ 10.031862] calling sdhci_driver_init+0x0/0x1000 [sdhci_pci] @ 292
[ 10.032380] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 10.032462] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 10.032561] ehci-pci 0000:00:1d.7: debug port 1
[ 10.033999] calling il3945_init+0x0/0x1000 [iwl3945] @ 291
[ 10.034002] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 10.034122] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 10.034213] iwl3945: hw_scan is disabled
[ 10.036555] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 10.036641] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 10.038943] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[ 10.052048] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 10.052241] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.052315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.052494] usb usb5: Product: EHCI Host Controller
[ 10.052591] usb usb5: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae ehci_hcd
[ 10.052697] usb usb5: SerialNumber: 0000:00:1d.7
[ 10.086525] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:b8:e3:49
[ 10.086677] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 10.086939] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[ 10.087806] initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 150834 usecs
[ 10.088979] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 10.089109] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[ 10.089227] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x3fff]
[ 10.089380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x3fff:
[ 10.092171] excluding 0x2000-0x20ff 0x2400-0x24ff
[ 10.109899] hub 5-0:1.0: USB hub found
[ 10.110045] hub 5-0:1.0: 8 ports detected
[ 10.110681] usb usb1: root hub lost power or was reset
[ 10.112478] hub 1-0:1.0: USB hub found
[ 10.112721] hub 1-0:1.0: 2 ports detected
[ 10.113059] usb usb2: root hub lost power or was reset
[ 10.113332] hub 2-0:1.0: USB hub found
[ 10.113415] hub 2-0:1.0: 2 ports detected
[ 10.113725] usb usb3: root hub lost power or was reset
[ 10.113874] hub 3-0:1.0: USB hub found
[ 10.113952] hub 3-0:1.0: 2 ports detected
[ 10.114249] usb usb4: root hub lost power or was reset
[ 10.131026] calling psmouse_init+0x0/0x7c [psmouse] @ 294
[ 10.131106] initcall psmouse_init+0x0/0x7c [psmouse] returned 0 after 64 usecs
[ 10.132919] hub 4-0:1.0: USB hub found
[ 10.133011] hub 4-0:1.0: 2 ports detected
[ 10.133281] ata_piix 0000:00:1f.1: version 2.13
[ 10.134200] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 250703 usecs
[ 10.140040] scsi host4: ata_piix
[ 10.143886] scsi host5: ata_piix
[ 10.144065] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50a0 irq 14
[ 10.144136] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50a8 irq 15
[ 10.144267] initcall piix_init+0x0/0x1000 [ata_piix] returned 0 after 252040 usecs
[ 10.144537] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 10.145105] ata5: port disabled--ignoring
[ 10.145187] ata6: port disabled--ignoring
[ 10.145781] initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 247793 usecs
[ 10.145982] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170728/utaddress-247)
[ 10.146108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.146201] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20170728/utaddress-247)
[ 10.146327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.146422] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20170728/utaddress-247)
[ 10.146539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.146645] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.150564] initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 139637 usecs
[ 10.151299] calling ata_generic_pci_driver_init+0x0/0x1000 [ata_generic] @ 293
[ 10.151343] initcall ata_generic_pci_driver_init+0x0/0x1000 [ata_generic] returned 0 after 36 usecs
[ 10.152241] calling nas_gpio_init+0x0/0xfe9 [leds_ss4200] @ 297
[ 10.152245] leds_ss4200: no LED devices found
[ 10.152319] initcall nas_gpio_init+0x0/0xfe9 [leds_ss4200] returned -19 after 70 usecs
[ 10.178817] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[ 10.178914] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[ 10.179012] excluding 0xe1ef0000-0xe20fffff
[ 10.179082] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[ 10.179173] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[ 10.179268] excluding 0xe2100000-0xe40fffff
[ 10.208858] iwl3945 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 10.208951] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 10.226292] initcall yenta_cardbus_driver_init+0x0/0x1000 [yenta_socket] returned 0 after 265350 usecs
[ 10.248659] calling vmx_init+0x0/0x5b1 [kvm_intel] @ 297
[ 10.251670] initcall vmx_init+0x0/0x5b1 [kvm_intel] returned 0 after 2924 usecs
[ 10.257490] calling coretemp_init+0x0/0x1000 [coretemp] @ 297
[ 10.258186] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0 after 669 usecs
[ 10.266826] calling init_pcmcia_bus+0x0/0x1000 [pcmcia] @ 327
[ 10.266864] initcall init_pcmcia_bus+0x0/0x1000 [pcmcia] returned 0 after 27 usecs
[ 10.274419] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 297
[ 10.274431] intel_powerclamp: No package C-state available
[ 10.274437] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned -19 after 9 usecs
[ 10.280114] calling arc4_init+0x0/0x1000 [arc4] @ 330
[ 10.296092] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 10.296255] initcall fw_ohci_init+0x0/0x1000 [firewire_ohci] returned 0 after 291499 usecs
[ 10.296690] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[ 10.296955] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 10.297052] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 10.300761] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 299
[ 10.300774] intel_powerclamp: No package C-state available
[ 10.300779] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned -19 after 10 usecs
[ 10.308830] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[ 10.308957] initcall sdhci_driver_init+0x0/0x1000 [sdhci_pci] returned 0 after 270589 usecs
[ 10.309127] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 10.319252] initcall arc4_init+0x0/0x1000 [arc4] returned 0 after 38209 usecs
[ 10.333247] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 10.333677] initcall il3945_init+0x0/0x1000 [iwl3945] returned 0 after 292639 usecs
[ 10.459652] e1000e 0000:01:00.0 eth8: renamed from eth0
[ 10.543207] calling iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] @ 295
[ 10.543210] iTCO_vendor_support: vendor-support=0
[ 10.543285] initcall iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] returned 0 after 70 usecs
[ 10.545383] calling iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] @ 295
[ 10.545415] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.545555] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560)
[ 10.552002] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.552193] initcall iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] returned 0 after 6610 usecs
[ 10.680624] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready
[ 10.682315] iwl3945 0000:02:00.0 wlan4: renamed from wlan0
[ 10.816190] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[ 11.003070] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.020492] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 11.116149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[ 11.170517] calling init_misc_binfmt+0x0/0x1000 [binfmt_misc] @ 398
[ 11.170531] initcall init_misc_binfmt+0x0/0x1000 [binfmt_misc] returned 0 after 6 usecs
[ 12.898492] calling serport_init+0x0/0x1000 [serport] @ 522
[ 12.898501] initcall serport_init+0x0/0x1000 [serport] returned 0 after 1 usecs
[ 12.898819] serio: Serial port ttyS0
[ 12.902412] calling w8001_drv_init+0x0/0x1000 [wacom_w8001] @ 524
[ 12.902453] initcall w8001_drv_init+0x0/0x1000 [wacom_w8001] returned 0 after 32 usecs
[ 14.208293] input: Wacom Serial Penabled Pen as /devices/pnp0/00:06/tty/ttyS0/serio2/input/input8
[ 14.212795] calling joydev_init+0x0/0x1000 [joydev] @ 526
[ 14.212810] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 8 usecs
[ 14.849243] e1000e: eth8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 14.849516] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[ 52.680347] calling drm_core_init+0x0/0xce [drm] @ 636
[ 52.680409] initcall drm_core_init+0x0/0xce [drm] returned 0 after 24 usecs
[ 52.692960] calling drm_kms_helper_init+0x0/0x14 [drm_kms_helper] @ 636
[ 52.692982] initcall drm_kms_helper_init+0x0/0x14 [drm_kms_helper] returned 0 after 1 usecs
[ 52.736553] calling i915_init+0x0/0x51 [i915] @ 636
[ 52.736987] pci 0000:00:00.0: Intel 945GM Chipset
[ 52.737011] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 52.737614] pci 0000:00:00.0: detected 8192K stolen memory
[ 52.737705] [drm] Memory usable by graphics device = 256M
[ 52.737711] [drm] Replacing VGA console driver
[ 52.739466] Console: switching to colour dummy device 80x25
[ 52.796935] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 52.796943] [drm] Driver supports precise vblank timestamp query.
[ 52.797390] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 52.838803] [drm] RC6 disabled, disabling runtime PM support
[ 52.838843] [drm] initialized overlay support
[ 52.840804] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 52.841075] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 52.853114] acpi device:04: registered as cooling_device3
[ 52.854516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 52.855858] initcall i915_init+0x0/0x51 [i915] returned 0 after 116406 usecs
[ 52.884157] fbcon: inteldrmfb (fb0) is primary device
[ 52.884331] Console: switching to colour frame buffer device 128x48
[ 52.884349] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2018-04-04 11:58    [W:0.130 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site