lkml.org 
[lkml]   [2018]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: Add a new binding for Broadcom V3D 3.x and newer GPUs.
Date
These OpenGL ES GPUs are present in the 7268 and 7278 set top box
chips.

v2: no changes
v3: move to gpu/, fix typo

Signed-off-by: Eric Anholt <eric@anholt.net>
---
.../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt

diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
new file mode 100644
index 000000000000..c907aa8dd755
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
@@ -0,0 +1,28 @@
+Broadcom V3D GPU
+
+Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
+For V3D 2.x, see brcm,bcm-vc4.txt.
+
+Required properties:
+- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
+- reg: Physical base addresses and lengths of the register areas
+- reg-names: Names for the register areas. The "hub", "bridge", and "core0"
+ register areas are always required. The "gca" register area
+ is required if the GCA cache controller is present.
+- interrupts: The interrupt numbers. The first interrupt is for the hub,
+ while the following interrupts are for the cores.
+ See bindings/interrupt-controller/interrupts.txt
+
+Optional properties:
+- clocks: The core clock the unit runs on
+
+v3d {
+ compatible = "brcm,7268-v3d";
+ reg = <0xf1204000 0x100>,
+ <0xf1200000 0x4000>,
+ <0xf1208000 0x4000>,
+ <0xf1204100 0x100>;
+ reg-names = "bridge", "hub", "core0", "gca";
+ interrupts = <0 78 4>,
+ <0 77 4>;
+};
--
2.17.0
\
 
 \ /
  Last update: 2018-04-30 20:11    [W:1.121 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site