Messages in this thread Patch in this message | | | From | Amit Nischal <> | Subject | [PATCH v6 2/3] clk: qcom: Add support for BRANCH_NO_DELAY flag for branch clocks | Date | Mon, 30 Apr 2018 21:50:09 +0530 |
| |
There could be few clocks where the clock status bit is not required to be polled as the clock on/off would be controlled by enabling/disabling external source. Add support for the same by introducing new flag named as 'BRANCH_NO_DELAY'.
Signed-off-by: Amit Nischal <anischal@codeaurora.org> --- drivers/clk/qcom/clk-branch.c | 7 +++++-- drivers/clk/qcom/clk-branch.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c index 26f7af31..1a3db39 100644 --- a/drivers/clk/qcom/clk-branch.c +++ b/drivers/clk/qcom/clk-branch.c @@ -77,8 +77,11 @@ static int clk_branch_wait(const struct clk_branch *br, bool enabling, bool voted = br->halt_check & BRANCH_VOTED; const char *name = clk_hw_get_name(&br->clkr.hw);
- /* Skip checking halt bit if the clock is in hardware gated mode */ - if (clk_branch_in_hwcg_mode(br)) + /* + * Skip checking halt bit if halt_check is BRANCH_NO_DELAY or + * the clock is in hardware gated mode + */ + if (br->halt_check == BRANCH_NO_DELAY || clk_branch_in_hwcg_mode(br)) return 0;
if (br->halt_check == BRANCH_HALT_DELAY || (!enabling && voted)) { diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h index 284df3f..5d621f3 100644 --- a/drivers/clk/qcom/clk-branch.h +++ b/drivers/clk/qcom/clk-branch.h @@ -42,6 +42,7 @@ struct clk_branch { #define BRANCH_HALT_ENABLE 1 /* pol: 0 = halt */ #define BRANCH_HALT_ENABLE_VOTED (BRANCH_HALT_ENABLE | BRANCH_VOTED) #define BRANCH_HALT_DELAY 2 /* No bit to check; just delay */ +#define BRANCH_NO_DELAY 3 /* No bit to check; without delay */
struct clk_regmap clkr; }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
| |