lkml.org 
[lkml]   [2018]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: nand: raw: atmel: add module param to avoid using dma
On 02/04/2018 at 22:23:17 +0200, Peter Rosin wrote:
> >> No, but did it again and checked, see transcript below.
> >
> > I don't use devmem2. Is 'readback' information accurate or is it
> > always what's been written? Because when you write 0x33 to 0xFFFFECBC,
> > 0x33 is read back, but just after that, when you read it again it's 0.
>
> Looking at the devmem2 source, it seems very likely that the compiler
> optimizes out the read and thus outputs what has been written.
>

At least on x86, it is not optimized out.


--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-04-03 09:19    [W:0.414 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site