[lkml]   [2018]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM: dts: imx6qdl-cubox-i: Move card-detect GPIO to 1.5 SOM devices only

Le dimanche 29 avril 2018 à 16:09 +0200, Jon Nettleton a écrit :
> You have either an initial early developer unit (pre-production) that
> was assembled like this for testing, or a unit that someone
> specifically ordered assembled this way. You can see from the
> schematic that this option does not have a CD-pin because it is meant
> to be a more permanent storage option.

It turns out that the card-detection mechanism was somewhat broken on my
device (which does have a regular push slot). It would report card-
detect only when the card was not fully inserted, and stop asserting
card-detect when it was pushed fully.

I used a fitting tweezer to move the mechanical parts around and got it
to also detect the card when it is pushed all the way.

So no change is necessary after all, it was just my device that needed

Thanks for the helpful answers!

Paul Kocialkowski,

developer of free digital technology and hardware support.

Coding blog:
Git repositories:[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2018-04-29 17:37    [W:0.079 / U:5.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site