lkml.org 
[lkml]   [2018]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
On 28 April 2018 at 06:19, Vivek Unune <npcomplete13@gmail.com> wrote:
> On Fri, Apr 27, 2018 at 10:05 AM, Vivek Unune <npcomplete13@gmail.com> wrote:
>> On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafał Miłecki wrote:
>>>
>>> The easiest solution: ignore all these "error -74 (ECC error) while
>>> reading" errors (they may last for few minutes!). I believe UBI should
>>> simply recreate all pages it couldn't access and once you wait long
>>> enough, all your NAND flash will be using BCH8.
>>
>> Let me build the firmware with BCH-8 and wait it out. I'll report back my
>> results.
>
> I can confirm that BCH-8 indeed works after letting it run through those
> ECC errors.
>
> Thanks!

Great, thanks! That controller behavior (reading BCH8 fine while
working in BCH4 mode) is really confusing.

--
Rafał

\
 
 \ /
  Last update: 2018-04-28 08:44    [W:0.098 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site