lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
On Wed, Apr 25 2018 at 16:11 -0600, Matthias Kaehlcke wrote:
>On Thu, Apr 19, 2018 at 04:16:31PM -0600, Lina Iyer wrote:
>> Allow sleep and wake commands to be cleared from the respective TCSes,
>> so that they can be re-populated.
>>
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> ---
>>
>> Changes in v6:
>> - remove unnecessary locks around __tcs_invalidate
>> - rename function to tcs_invaldiate
>>
>> Changes in v4:
>> - refactored the rphm_rsc_invalidate()
>> ---
>> drivers/soc/qcom/rpmh-rsc.c | 45 +++++++++++++++++++++++++++++++++++++
>> 1 file changed, 45 insertions(+)
>>
>> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
>> index d169f7da5422..170d4a10275d 100644
>> --- a/drivers/soc/qcom/rpmh-rsc.c
>> +++ b/drivers/soc/qcom/rpmh-rsc.c
>> @@ -101,6 +101,51 @@ static struct tcs_group *get_tcs_of_type(struct rsc_drv *drv, int type)
>> return &drv->tcs[type];
>> }
>>
>> +static int tcs_invalidate(struct rsc_drv *drv, int type)
>> +{
>> + int m;
>> + struct tcs_group *tcs;
>> +
>> + tcs = get_tcs_of_type(drv, type);
>> + if (IS_ERR(tcs))
>> + return PTR_ERR(tcs);
>> +
>> + spin_lock(&tcs->lock);
>> + if (bitmap_empty(tcs->slots, MAX_TCS_SLOTS)) {
>> + spin_unlock(&tcs->lock);
>> + return 0;
>> + }
>> +
>> + for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
>> + if (!tcs_is_free(drv, m)) {
>> + spin_unlock(&tcs->lock);
>> + return -EAGAIN;
>> + }
>> + write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0);
>> + bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
>
>Shouldn't this only clear the slots corresponding to 'm'?
>
>If resetting the entire bitmap is really intended it could be done
>once after the loop, though the bitmap might be left in an
>inconsistent state if a TCS is still in use.
The TCS will not be in use, the check tcs_is_free() will ensure that. I
will move the bitmap_zero() outside the for().

Thanks,
Lina

\
 
 \ /
  Last update: 2018-04-27 18:45    [W:0.042 / U:1.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site