lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [BUG] igb: reconnecting of cable not always detected
Date
Hi Alex,

> The first are the following 2 lines from your dump:
> Apr 26 10:42:49 kernel: igb 0000:02:00.0 eth0: igb: eth0 NIC Link is
> Up 1000 Mbps Half Duplex, Flow Control: RX
> Apr 26 10:42:49 kernel: igb 0000:02:00.0: EEE Disabled: unsupported at
> half duplex. Re-enable using ethtool when at full duplex.

Can it be the case that this is just a follow-up error?

In one of the mails from yesterday I showed you my patch to disable 1000
MB/s ... and still I had the link-always-down.

Similarly when I used a 10/100 MB/s switch only.

Both scenarios disabled 1000 MB/s, one more strictly than the other :-)

\
 
 \ /
  Last update: 2018-04-27 12:40    [W:0.074 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site