lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 02/11] arm64/kvm: consistently handle host HCR_EL2 flags
On Tue, Apr 17, 2018 at 07:37:26PM +0100, Mark Rutland wrote:
> In KVM we define the configuration of HCR_EL2 for a VHE HOST in
> HCR_HOST_VHE_FLAGS, but we don't ahve a similar definition for the

nit: have

> non-VHE host flags, and open-code HCR_RW. Further, in head.S we
> open-code the flags for VHE and non-VHE configurations.
>
> In future, we're going to want to configure more flags for the host, so
> lets add a HCR_HOST_NVHE_FLAGS defintion, adn consistently use both

nit: and

> HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S.
>
> We now use mov_q to generate the HCR_EL2 value, as we use when
> configuring other registers in head.S.
>
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Christoffer Dall <cdall@kernel.org>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: kvmarm@lists.cs.columbia.edu
> ---
> arch/arm64/include/asm/kvm_arm.h | 1 +
> arch/arm64/kernel/head.S | 5 ++---
> arch/arm64/kvm/hyp/switch.c | 2 +-
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
> index 6dd285e979c9..89b3dda7e3cb 100644
> --- a/arch/arm64/include/asm/kvm_arm.h
> +++ b/arch/arm64/include/asm/kvm_arm.h
> @@ -86,6 +86,7 @@
> HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
> HCR_FMO | HCR_IMO)
> #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
> +#define HCR_HOST_NVHE_FLAGS (HCR_RW)
> #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
>
> /* TCR_EL2 Registers bits */
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index b0853069702f..651a06b1980f 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -494,10 +494,9 @@ ENTRY(el2_setup)
> #endif
>
> /* Hyp configuration. */
> - mov x0, #HCR_RW // 64-bit EL1
> + mov_q x0, HCR_HOST_NVHE_FLAGS
> cbz x2, set_hcr
> - orr x0, x0, #HCR_TGE // Enable Host Extensions
> - orr x0, x0, #HCR_E2H
> + mov_q x0, HCR_HOST_VHE_FLAGS
> set_hcr:
> msr hcr_el2, x0
> isb
> diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> index d9645236e474..cdae330e15e9 100644
> --- a/arch/arm64/kvm/hyp/switch.c
> +++ b/arch/arm64/kvm/hyp/switch.c
> @@ -143,7 +143,7 @@ static void __hyp_text __deactivate_traps_nvhe(void)
> mdcr_el2 |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT;
>
> write_sysreg(mdcr_el2, mdcr_el2);
> - write_sysreg(HCR_RW, hcr_el2);
> + write_sysreg(HCR_HOST_NVHE_FLAGS, hcr_el2);
> write_sysreg(CPTR_EL2_DEFAULT, cptr_el2);
> }
>
> --
> 2.11.0
>
>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>

\
 
 \ /
  Last update: 2018-04-27 11:52    [W:0.125 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site