lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM64: dts: meson-axg: enable AP6255 wifi module
From
Date
On 04/28/18 03:09, Kevin Hilman wrote:
> Yixun Lan <yixun.lan@amlogic.com> writes:
>
>> The Meson-AXG S400 board is shipped with AP6255 wifi module,
>> which is actually using the brcmfmac 43455 driver.
>>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> .../arm64/boot/dts/amlogic/meson-axg-s400.dts | 44 ++++++++++++++++++-
>> 1 file changed, 43 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
>> index f67d4e47e641..b3e1bdca32bb 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
>> @@ -51,7 +51,16 @@
>>
>> sdio_pwrseq: sdio-pwrseq {
>> compatible = "mmc-pwrseq-simple";
>> - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
>> + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
>
> You didn't mention this GPIO change in the changelog. Is it
> intentional?

Yes, the 'sdio_pwrseq' is used by wifi driver till now
previous the reset-gpio is wrongly configured (copy & paste error),
according to the schematics, it's GPIOX_7 which need to be fixed here.

to be clean, in s400 board
GPIOX_6 is WIFI_WAKE_HOST pin
GPIOX_7 is WIFI_PWREN pin

do you want me to put a note into the commit message? and resend this patch?

Thanks


>
>> + clocks = <&wifi32k>;
>> + clock-names = "ext_clock";
>> + };
>> +
>> + wifi32k: wifi32k {
>> + compatible = "pwm-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
>> };
>> };
>>
>> @@ -86,6 +95,12 @@
>> pinctrl-names = "default";
>> };
>>
>> +&pwm_ab {
>> + status = "okay";
>> + pinctrl-0 = <&pwm_a_x20_pins>;
>> + pinctrl-names = "default";
>> +};
>> +
>> /* emmc storage */
>> &sd_emmc_c {
>> status = "okay";
>> @@ -105,3 +120,30 @@
>> vmmc-supply = <&vcc_3v3>;
>> vqmmc-supply = <&vddio_boot>;
>> };
>> +
>> +/* wifi module */
>> +&sd_emmc_b {
>> + status = "okay";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pinctrl-0 = <&sdio_pins>;
>> + pinctrl-1 = <&sdio_clk_gate_pins>;
>> + pinctrl-names = "default", "clk-gate";
>> +
>> + bus-width = <4>;
>> + cap-sd-highspeed;
>> + max-frequency = <100000000>;
>> + non-removable;
>> + disable-wp;
>> +
>> + mmc-pwrseq = <&sdio_pwrseq>;
>> +
>> + vmmc-supply = <&vddao_3v3>;
>> + vqmmc-supply = <&vddio_boot>;
>> +
>> + brcmf: wifi@1 {
>> + reg = <1>;
>> + compatible = "brcm,bcm4329-fmac";
>> + };
>> +};
>
> .
>

\
 
 \ /
  Last update: 2018-04-28 03:56    [W:0.051 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site