lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
Date
Jerome Brunet <jbrunet@baylibre.com> writes:

> There is a problem with the sd-uhs mode when doing a soft reboot.
> Switching back from 1.8v to 3.3v messes with the card, which no longer
> respond (timeout errors). According to the specification, we should
> perform a card reset (power cycling the card) but this is something we
> cannot control on this design.
>
> Then the only solution to restore the communication with the card is an
> "unplug-plug" which is not acceptable
>
> Until we find a solution, if any, disable the sd-uhs modes on this design.
> For the people using uhs at the moment, there will a performance drop as
> a result.
>
> Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

Applied to v4.17/fixes, and adding a Cc to stable.

Thanks,

Kevin

\
 
 \ /
  Last update: 2018-04-27 21:16    [W:0.088 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site