lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
Date
Richard Jones has reported that using med_power_with_dipm on a T450s
with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is
causing the machine to hang.

Switching the LPM to max_performance fixes this, so it seems that
this Sandisk SSD does not handle LPM well.

Note in the past there have been bug-reports about the following
Sandisk models not working with min_power, so we may need to extend
the quirk list in the future: name - firmware
Sandisk SD6SB2M512G1022I - X210400
Sandisk SD6PP4M-256G-1006 - A200906

Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/libata-core.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6e400ff2b5db..68596bd4cf06 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4552,6 +4552,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* This specific Samsung model/firmware-rev does not handle LPM well */
{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },

+ /* Sandisk devices which are known to not handle LPM well */
+ { "SanDisk SD7UB3Q*G1001", NULL, ATA_HORKAGE_NOLPM, },
+
/* devices that don't properly handle queued TRIM commands */
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
--
2.17.0
\
 
 \ /
  Last update: 2018-04-26 22:33    [W:0.030 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site