[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 0/6] clocksource: rework Atmel TCB timer driver
On 26/04/2018 18:46:23+0200, Sebastian Andrzej Siewior wrote:
> On 2018-04-18 12:51:37 [+0200], Alexandre Belloni wrote:
> > Hi,
> Hi,
> please keep on Cc if you intend to repost this.

Sure, I'll do.

> > This series gets back on the TCB drivers rework. It introduces a new driver to
> > handle the clocksource and clockevent devices.
> So you don't want the old thing we have in -RT. I remember you (the
> atmel folks) wanted something different the last time I posted the
> patches.

I don't remember you posted anything for the TCB. Wasn't it focused on
getting rid of the PIT irq?

As said below, this is solving multiple issues, including the one for
SoCs that don't have the PIT.

> > As a reminder, this is necessary because:
> > - the current tcb_clksrc driver is probed too late to be able to be used at
> > boot and we now have SoCs that don't have a PIT. They currently are not able
> > to boot a mainline kernel.
> > - using the PIT doesn't work well with preempt-rt because its interrupt is
> > shared (in particular with the UART and their interrupt flags are
> > incompatible)
> If you could get rid of this:
> | clocksource: Switched to clocksource timer@f0010000:0
> | BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:974
> | in_atomic(): 1, irqs_disabled(): 128, pid: 1, name: swapper
> | Preemption disabled at:
> | [<c014f7ac>] __handle_domain_irq+0x40/0xdc
> | Hardware name: Atmel SAMA5
> | [<c010e14c>] (unwind_backtrace) from [<c010bd74>] (show_stack+0x10/0x14)
> | [<c010bd74>] (show_stack) from [<c013b314>] (___might_sleep+0x16c/0x1c0)
> | [<c013b314>] (___might_sleep) from [<c06696f0>] (rt_spin_lock+0x40/0x80)
> | [<c06696f0>] (rt_spin_lock) from [<c046e030>] (clk_enable_lock+0x30/0xe4)
> | [<c046e030>] (clk_enable_lock) from [<c046ea4c>] (clk_core_disable_lock+0xc/0x1c)
> | [<c046ea4c>] (clk_core_disable_lock) from [<c059d07c>] (tc_clkevt2_shutdown+0x64/0x6c)
> | [<c059d07c>] (tc_clkevt2_shutdown) from [<c059d09c>] (tc_clkevt2_set_oneshot+0x18/0x78)
> | [<c059d09c>] (tc_clkevt2_set_oneshot) from [<c0172a00>] (clockevents_switch_state+0xb8/0x130)
> | [<c0172a00>] (clockevents_switch_state) from [<c0173a60>] (tick_switch_to_oneshot+0x48/0xb8)
> | [<c0173a60>] (tick_switch_to_oneshot) from [<c0165a0c>] (hrtimer_run_queues+0xf0/0x15c)
> | [<c0165a0c>] (hrtimer_run_queues) from [<c0164010>] (run_local_timers+0x8/0x38)
> | [<c0164010>] (run_local_timers) from [<c0164070>] (update_process_times+0x30/0x60)
> | [<c0164070>] (update_process_times) from [<c0173008>] (tick_handle_periodic+0x1c/0x90)
> | [<c0173008>] (tick_handle_periodic) from [<c059c954>] (tc_clkevt2_irq+0x38/0x48)
> | [<c059c954>] (tc_clkevt2_irq) from [<c014fe6c>] (__handle_irq_event_percpu+0x7c/0x28c)
> that would be so awesome.

Ok, if I understand correctly tc_clkevt2_set_oneshot is called from
atomic context so it shouldn't call tc_clkevt2_shutdown.

Back in 2016, tglx said:
"There was an earlier discussion about the clk stuff. Actually the lock
protecting disable/enable should be made raw, but there was some crap going on
in some of the clk callbacks which made that impossible. We realy should
revisit this."

Anyway, I'll try to avoid disabling the clock just to reenable it

(Actually, I've just checked before sending and I've found your patch,
I'll do something similar)

> > - the current solution is wasting some TCB channels
> >
> > The plan is to get this driver upstream, then convert the TCB PWM driver to be
> > able to get rid of the tcb_clksrc driver along with atmel_tclib.
> The config options are now less than optimal (for me at least). On
> oldconfig it asks you for PIT and I say selected no because I wanted the
> new one. So I end up with nothing.
> Not sure you want do something about it…

I don't think you ending up with nothing but probably you removed the
PIT and kept ATMEL_TCLIB which is the combination that is really
difficult to protect from. I don't think it is worth the added Kconfig

> Is the resolution more or the same compared what we have in -RT? On an
> idle system this clocks goes up to 180us/ 190us while the old clock
> started at 160us and moved to around 180us after one hackbench
> invocation. This could be nothing, it could be a lower frequency of the
> clockevents device.

The driver shouldn't change anything on that side.

> If you intend to stick with this driver then I would replace the current
> hack in -RT with this series.

That is one of the goal, yes.

The remaining one would be "clocksource: TCLIB: Allow higher clock rates
for clock events"

Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering

 \ /
  Last update: 2018-04-26 20:52    [W:0.082 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site