lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD
On Tue, Apr 24, 2018 at 11:19:07AM +0200, Hans de Goede wrote:
> Kevin Shanahan reports the following repeating errors when using LPM,
> causing long delays accessing the disk:
>
> Apr 23 10:21:43 link kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
> Apr 23 10:21:43 link kernel: ata1: SError: { PHYRdyChg CommWake }
> Apr 23 10:21:43 link kernel: ata1.00: failed command: WRITE DMA
> Apr 23 10:21:43 link kernel: ata1.00: cmd ca/00:08:60:5d:cd/00:00:00:00:00/e1 tag 9 dma 4096 out
> res 50/01:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Apr 23 10:21:43 link kernel: ata1.00: status: { DRDY }
> Apr 23 10:21:43 link kernel: ata1.00: error: { AMNF }
> Apr 23 10:21:43 link kernel: ata1: hard resetting link
> Apr 23 10:21:43 link kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> Apr 23 10:21:43 link kernel: ata1.00: configured for UDMA/133
> Apr 23 10:21:43 link kernel: ata1: EH complete
>
> These go away when switching from med_power_with_dipm to medium_power.
>
> This is somewhat weird as the PM830 datasheet explicitly mentions DIPM
> being supported and the idle power-consumption is specified with DIPM
> enabled.
>
> There are many OEM customized firmware versions for the PM830, so for now
> lets assume this is firmware version specific and blacklist LPM based on
> the firmware version.
>
> Cc: Kevin Shanahan <kevin@shanahan.id.au>
> Reported-by: Kevin Shanahan <kevin@shanahan.id.au>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Applied to libata/for-4.17-fixes.

Thanks.

--
tejun

\
 
 \ /
  Last update: 2018-04-26 20:47    [W:0.027 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site