lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/2] media: Add a driver for the ov7251 camera sensor
From
Date
Hi Sakari,

On 26.04.2018 09:50, Sakari Ailus wrote:
> Hi Todor,
>
> On Wed, Apr 25, 2018 at 07:20:46PM +0300, Todor Tomov wrote:
> ...
>> +static int ov7251_write_reg(struct ov7251 *ov7251, u16 reg, u8 val)
>> +{
>> + u8 regbuf[3];
>> + int ret;
>> +
>> + regbuf[0] = reg >> 8;
>> + regbuf[1] = reg & 0xff;
>> + regbuf[2] = val;
>> +
>> + ret = i2c_master_send(ov7251->i2c_client, regbuf, 3);
>> + if (ret < 0) {
>> + dev_err(ov7251->dev, "%s: write reg error %d: reg=%x, val=%x\n",
>> + __func__, ret, reg, val);
>> + return ret;
>> + }
>> +
>> + return 0;
>
> How about:
>
> return ov7251_write_seq_regs(ov7251, reg, &val, 1);
>
> And put the function below ov2751_write_seq_regs().

I'm not sure... It will calculate message length each time and then check
that it is not greater than 5, which it is. Seems redundant.

>
>> +}
>> +
>> +static int ov7251_write_seq_regs(struct ov7251 *ov7251, u16 reg, u8 *val,
>> + u8 num)
>> +{
>> + const u8 maxregbuf = 5;
>> + u8 regbuf[maxregbuf];
>> + u8 nregbuf = sizeof(reg) + num * sizeof(*val);
>> + int ret = 0;
>> +
>> + if (nregbuf > maxregbuf)
>> + return -EINVAL;
>> +
>> + regbuf[0] = reg >> 8;
>> + regbuf[1] = reg & 0xff;
>> +
>> + memcpy(regbuf + 2, val, num);
>> +
>> + ret = i2c_master_send(ov7251->i2c_client, regbuf, nregbuf);
>> + if (ret < 0) {
>> + dev_err(ov7251->dev, "%s: write seq regs error %d: first reg=%x\n",
>
> This line is over 80...

Yes indeed. Somehow checkpatch does not report this line, I don't know why.

>
> If you're happy with these, I can make the changes, too; they're trivial.

Only the second one? Thanks :)

>
>> + __func__, ret, reg);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>

--
Best regards,
Todor Tomov

\
 
 \ /
  Last update: 2018-04-26 09:05    [W:0.689 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site