lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/18] thermal: exynos: always check for critical trip points existence
Date
* Check for critical trip point existence in exynos_tmu_initialize()
so it is checked on all SoCs (except Exynos5433 for now).

* Use dev_err() instead of pr_err().

* Fix dev_err() to reference "device tree" not "of-thermal.c".

* Remove no longer needed check from exynos4412_tmu_initialize().

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 9e040eb..a0c1604 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -331,7 +331,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
struct thermal_zone_device *tzd = data->tzd;
const struct thermal_trip * const trips =
of_thermal_get_trip_points(tzd);
- int ret;
+ int ret = 0, temp;

if (!trips) {
dev_err(&pdev->dev,
@@ -339,6 +339,14 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
return -ENODEV;
}

+ if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
+ ret = tzd->ops->get_crit_temp(tzd, &temp);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "No CRITICAL trip point defined in device tree!\n");
+ goto out;
+ }
+
if (of_thermal_get_ntrips(tzd) > data->ntrip) {
dev_info(&pdev->dev,
"More trip points than supported by this TMU.\n");
@@ -356,7 +364,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
mutex_unlock(&data->lock);
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
-
+out:
return ret;
}

@@ -480,13 +488,6 @@ static int exynos4412_tmu_initialize(struct platform_device *pdev)
}
}

- if (i == of_thermal_get_ntrips(data->tzd)) {
- pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
- __func__);
- ret = -EINVAL;
- goto out;
- }
-
threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
--
1.9.1
\
 
 \ /
  Last update: 2018-04-26 13:57    [W:0.207 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site