Messages in this thread | | | From | Rob Herring <> | Date | Wed, 25 Apr 2018 09:47:08 -0500 | Subject | Re: [PATCH v3 11/15] ARM: dts: dra7-evm: Add wilink8 wlan support |
| |
On Wed, Apr 25, 2018 at 7:54 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote: > From: Hari Nagalla <hnagalla@ti.com> > > The wilink module is a combo wireless connectivity sdio > card based on Texas Instrument's wl18xx solution. It is a > 4-wire, 1.8V, embedded sdio wlan device with an external > irq line and is power-controlled by a gpio-based fixed > regulator. > > Add pinmux configuration and IODelay values for MMC4. > On dra7-evm, MMC4 is used for connecting to wilink module. > > IODelay data credits to : Vishal Mahaveer <vishalm@ti.com> > and Sekhar Nori <nsekhar@ti.com> > > Signed-off-by: Ido Yariv <ido@wizery.com> > Signed-off-by: Eyal Reizer <eyalr@ti.com> > Signed-off-by: Hari Nagalla <hnagalla@ti.com> > Signed-off-by: Sekhar Nori <nsekhar@ti.com> > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > arch/arm/boot/dts/dra7-evm-common.dtsi | 15 +++++++++++++++ > arch/arm/boot/dts/dra7-evm.dts | 25 +++++++++++++++++++++++++ > 2 files changed, 40 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi > index 05a7b1a01bc3..3590c40fc112 100644 > --- a/arch/arm/boot/dts/dra7-evm-common.dtsi > +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi > @@ -260,3 +260,18 @@ > &pcie1_rc { > status = "okay"; > }; > + > +&mmc4 { > + bus-width = <4>; > + cap-power-off-card; > + keep-power-in-suspend; > + non-removable; > + #address-cells = <1>; > + #size-cells = <0>; > + wlcore: wlcore@2 {
wifi@2
| |