lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/15] dra7: mmc: Update mmc dt node to use sdhci-omap
Date
Previous version of the patch series was sent here
https://lkml.org/lkml/2018/2/6/250

Most of the patches sent for v2 was merged. Remaining unmerged patches
from v2 and a few additional patches are sent here.

This series should be merged only after [1].
[1] -> https://marc.info/?l=linux-kernel&m=152465820531802&w=2

This series:
*) Adds wilink wlan support (Now all MMC instances in DRA7 will use
sdhci-omap)
*) Add a new pinctrl group for clk line without pullup required for
UHS cards to work reliably.
*) Update README to make sure users update .config file from 4.18
kernel.
*) Use sdhci-omap programming model.

In the "Use sdhci-omap programming model" patch, "ti,omap4-hsmmc"
compatible is removed. This is because if both "ti,dra7-sdhci" and
"ti,omap4-hsmmc" is added and if there is probe deferral in sdhci_omap
driver, the device is binding to omap_hsmmc driver.

Once omap_hsmmc and sdhci_omap driver are feature identical,
sdhci_omap driver will be made to support omap_hsmmc binding
(including "ti,omap4-hsmmc" compatible) and omap_hsmmc driver will
be removed. Till then dt nodes with "ti,omap4-hsmmc" compatible
will use omap_hsmmc driver and "ti,dra7-sdhci" compatible will
use sdhci_omap driver.

Hari Nagalla (2):
ARM: dts: dra72-evm-common: Add wilink8 wlan support
ARM: dts: dra7-evm: Add wilink8 wlan support

Kishon Vijay Abraham I (11):
ARM: dts: dra72-evm-common: Remove mmc specific pinmux
ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: dra72x-mmc-iodelay: Add a new pinctrl group for clk line
without pullup
ARM: dts: dra74x-mmc-iodelay: Add a new pinctrl group for clk line
without pullup
ARM: dts: dra76x-mmc-iodelay: Add a new pinctrl group for clk line
without pullup
ARM: dts: am57xx-idk: Use pinctrl group from dra7xx-mmc-iodelay.dtsi
to select pulldown
ARM: dts: dra71-evm: Use pinctrl group from dra72x-mmc-iodelay.dtsi to
select pulldown
ARM: dts: dra7-evm: Model EVM_3V6 regulator
ARM: dts: dra7: Use sdhci-omap programming model
ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
Documentation: ARM: Add new MMC requirements for DRA7/K2G

Sekhar Nori (1):
ARM: dts: am574x-idk: Add pinmux configuration for MMC

Vishal Mahaveer (1):
ARM: dts: dra76-evm: Add wilink8 wlan support

Documentation/arm/OMAP/README | 4 ++
arch/arm/boot/dts/am571x-idk.dts | 2 +-
arch/arm/boot/dts/am572x-idk.dts | 2 +-
arch/arm/boot/dts/am574x-idk.dts | 19 +++++
.../boot/dts/am57xx-beagle-x15-common.dtsi | 4 +-
arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 +
arch/arm/boot/dts/am57xx-idk-common.dtsi | 3 +-
arch/arm/boot/dts/dra7-evm-common.dtsi | 15 ++++
arch/arm/boot/dts/dra7-evm.dts | 68 ++++++++++++++++++
arch/arm/boot/dts/dra7.dtsi | 30 ++++----
arch/arm/boot/dts/dra71-evm.dts | 16 +----
arch/arm/boot/dts/dra72-evm-common.dtsi | 71 +++++++++++--------
arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi | 22 ++++++
arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi | 11 +++
arch/arm/boot/dts/dra76-evm.dts | 34 ++++++++-
arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi | 11 +++
16 files changed, 248 insertions(+), 65 deletions(-)

--
2.17.0

\
 
 \ /
  Last update: 2018-04-25 15:01    [W:0.146 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site